fix: remove references to git reset

It is an advanced and difficult revert to accomplish and should probably
be done through a reset instead, which means that we're modifying
history which is dangerous and so should be handled by someone who
understands these dangers.

01-essentials/01-basics/README.md

@@ -29,20 +29,25 @@ Your goal is to commit both `welcome.txt` and `instructions.txt` to a git reposi
 1. Navigate into the `challenge` directory: `cd challenge`
 2. **Initialize a new git repository**: `git init` (this is your first step!)
 3. Check the status of your repository: `git status`
-4. Stage the files you want to commit: `git add welcome.txt` (or `git add .` to stage all files)
-5. Create a commit: `git commit -m "Your commit message"`
-6. Verify both files are committed: `git ls-tree -r HEAD --name-only`
+4. Stage the file you want to commit: `git add welcome.txt` (or `git add .` to stage all files)
+5. Check the status again and see the difference `git status`. Notice the file is now *staged* and ready to be committed.
+6. Create a commit: `git commit -m "add welcome.txt"`
+5. Check the status again and see the difference `git status`. Notice the file no longer appears in the output.
+7. Stage the next file: `git add instructions.txt` (or `git add .` to stage all files)
+8. Check the status again and see the difference `git status`. Notice the file is now *staged* and ready to be committed.
+9. Create a commit: `git commit -m "add instructions.txt"`
+10. Check the status again and see the difference `git status`. Notice that the files are now not shown in status. If and when you change something about the file you will once again see it in the `git status` command.
 
 **Important Notes**:
 - The challenge directory is NOT a git repository until you run `git init`. This is intentional - you're learning to start from scratch!
-- You can commit both files together in one commit, or separately in multiple commits - it's up to you!
+- You can commit both files together in one commit, or separately in multiple commits (use `git add .` to add all files in the folder) - it's up to you!
 - The verification script checks that both files are committed, not the specific commit messages or order
 
 ### Key Concepts
 
 - **Repository**: A directory tracked by git, containing your project files and their history
 - **Working Directory**: The files you see and edit
-- **Staging Area (Index)**: A preparation area for your next commit
+- **Staging Area**: A preparation area for your next commit, you first add the files to the stage, and then you commit the files to repository.
 - **Commit**: A snapshot of your staged changes
 
 ### Useful Commands

01-essentials/02-history/verify.ps1

@@ -42,7 +42,7 @@ if (-not (Test-Path "answers.md")) {
     $answersLower = $answers.ToLower()
 
     # Check 1: Contains "5" or "five" for commit count
-    if ($answersLower -match "5|five") {
+    if ($answersLower -match "5|five|fem") {
         Write-Host "[PASS] Correct commit count found" -ForegroundColor Green
     } else {
         Write-Host "[FAIL] Commit count not found or incorrect" -ForegroundColor Red
@@ -76,7 +76,7 @@ if (-not (Test-Path "answers.md")) {
     }
 
     # Check 4: Contains "config" keyword for staged file
-    if ($answersLower -match "config") {
+    if ($answersLower -match "config.py") {
         Write-Host "[PASS] Staged file identified" -ForegroundColor Green
     } else {
         Write-Host "[FAIL] Staged file not identified" -ForegroundColor Red

01-essentials/03-branching-and-merging/reset.ps1

@@ -1,216 +1,23 @@
 #!/usr/bin/env pwsh
 <#
 .SYNOPSIS
-    Resets the challenge environment to a specific checkpoint.
+    Resets the Module 03 challenge environment.
 
 .DESCRIPTION
-    This script allows you to jump to any checkpoint in the module,
-    resetting your repository to that state. Useful for skipping ahead,
-    starting over, or practicing specific sections.
-
-.PARAMETER Checkpoint
-    The checkpoint to reset to: start, merge, or merge-conflict.
-    If not specified, displays help information.
-
-.EXAMPLE
-    .\reset.ps1
-    Shows available checkpoints and current status.
-
-.EXAMPLE
-    .\reset.ps1 start
-    Resets to the beginning (branching basics section).
-
-.EXAMPLE
-    .\reset.ps1 merge
-    Jumps to the merging section (feature-login branch already exists).
-
-.EXAMPLE
-    .\reset.ps1 merge-conflict
-    Jumps to the conflict resolution section (merge already complete).
+    This script removes the challenge directory, allowing you to start fresh.
+    Run setup.ps1 again after resetting to recreate the environment.
 #>
 
-param(
-    [ValidateSet('start', 'merge', 'merge-conflict', '')]
-    [string]$Checkpoint = ''
-)
+Write-Host "`n=== Resetting Module 03 Challenge ===" -ForegroundColor Cyan
 
-# Checkpoint to tag mapping
-$checkpointTags = @{
-    'start' = 'checkpoint-start'
-    'merge' = 'checkpoint-merge'
-    'merge-conflict' = 'checkpoint-merge-conflict'
+if (Test-Path "challenge") {
+    Write-Host "Removing challenge directory..." -ForegroundColor Yellow
+    Remove-Item -Recurse -Force "challenge"
+    Write-Host "`n[SUCCESS] Challenge environment reset complete!" -ForegroundColor Green
+    Write-Host "`nRun .\setup.ps1 to create a fresh challenge environment." -ForegroundColor Cyan
+    Write-Host ""
+} else {
+    Write-Host "`n[INFO] No challenge directory found. Nothing to reset." -ForegroundColor Yellow
+    Write-Host "Run .\setup.ps1 to create the challenge environment." -ForegroundColor Cyan
+    Write-Host ""
 }
-
-# Checkpoint descriptions
-$checkpointDescriptions = @{
-    'start' = 'Branching Basics - Create and work with feature branches'
-    'merge' = 'Merging Branches - Merge feature-login into main'
-    'merge-conflict' = 'Resolving Conflicts - Fix merge conflicts in config.json'
-}
-
-# ============================================================================
-# Display help if no checkpoint specified
-# ============================================================================
-if ($Checkpoint -eq '') {
-    Write-Host "`n=== Module 03: Branching and Merging - Checkpoints ===" -ForegroundColor Cyan
-    Write-Host "`nAvailable checkpoints:" -ForegroundColor White
-    Write-Host ""
-
-    foreach ($key in @('start', 'merge', 'merge-conflict')) {
-        $desc = $checkpointDescriptions[$key]
-        Write-Host "  $key" -ForegroundColor Green -NoNewline
-        Write-Host " - $desc" -ForegroundColor White
-    }
-
-    Write-Host "`nUsage:" -ForegroundColor Cyan
-    Write-Host "  .\reset.ps1 <checkpoint>" -ForegroundColor White
-    Write-Host ""
-    Write-Host "Examples:" -ForegroundColor Cyan
-    Write-Host "  .\reset.ps1 start           # Start from the beginning" -ForegroundColor White
-    Write-Host "  .\reset.ps1 merge           # Jump to merging section" -ForegroundColor White
-    Write-Host "  .\reset.ps1 merge-conflict  # Jump to conflict resolution" -ForegroundColor White
-    Write-Host ""
-
-    # Try to detect current checkpoint
-    if (Test-Path "challenge/.git") {
-        Push-Location "challenge"
-        $currentBranch = git branch --show-current 2>$null
-        $currentCommit = git rev-parse HEAD 2>$null
-
-        # Check which checkpoint we're at
-        $currentCheckpoint = $null
-        foreach ($cp in @('start', 'merge', 'merge-conflict')) {
-            $tagCommit = git rev-parse $checkpointTags[$cp] 2>$null
-            if ($currentCommit -eq $tagCommit) {
-                $currentCheckpoint = $cp
-                break
-            }
-        }
-
-        if ($currentCheckpoint) {
-            Write-Host "Current checkpoint: " -ForegroundColor Yellow -NoNewline
-            Write-Host "$currentCheckpoint" -ForegroundColor Green -NoNewline
-            Write-Host " (on branch $currentBranch)" -ForegroundColor Yellow
-        } else {
-            Write-Host "Current status: " -ForegroundColor Yellow -NoNewline
-            Write-Host "In progress (on branch $currentBranch)" -ForegroundColor White
-        }
-
-        Pop-Location
-    }
-
-    Write-Host ""
-    exit 0
-}
-
-# ============================================================================
-# Validate challenge directory exists
-# ============================================================================
-if (-not (Test-Path "challenge")) {
-    Write-Host "[ERROR] Challenge directory not found." -ForegroundColor Red
-    Write-Host "Run .\setup.ps1 first to create the challenge environment." -ForegroundColor Yellow
-    exit 1
-}
-
-if (-not (Test-Path "challenge/.git")) {
-    Write-Host "[ERROR] No git repository found in challenge directory." -ForegroundColor Red
-    Write-Host "Run .\setup.ps1 first to create the challenge environment." -ForegroundColor Yellow
-    exit 1
-}
-
-# Navigate to challenge directory
-Push-Location "challenge"
-
-# ============================================================================
-# Verify the checkpoint tag exists
-# ============================================================================
-$targetTag = $checkpointTags[$Checkpoint]
-$tagExists = git tag -l $targetTag
-
-if (-not $tagExists) {
-    Write-Host "[ERROR] Checkpoint tag '$targetTag' not found." -ForegroundColor Red
-    Write-Host "Run ..\setup.ps1 to recreate the challenge environment." -ForegroundColor Yellow
-    Pop-Location
-    exit 1
-}
-
-# ============================================================================
-# Check for uncommitted changes
-# ============================================================================
-$statusOutput = git status --porcelain 2>$null
-
-if ($statusOutput) {
-    Write-Host "`n[WARNING] You have uncommitted changes!" -ForegroundColor Yellow
-    Write-Host "The following changes will be lost:" -ForegroundColor Yellow
-    Write-Host ""
-    git status --short
-    Write-Host ""
-
-    $response = Read-Host "Continue and discard all changes? (y/N)"
-    if ($response -ne 'y' -and $response -ne 'Y') {
-        Write-Host "`nReset cancelled." -ForegroundColor Cyan
-        Pop-Location
-        exit 0
-    }
-}
-
-# ============================================================================
-# Reset to checkpoint
-# ============================================================================
-Write-Host "`nResetting to checkpoint: $Checkpoint" -ForegroundColor Cyan
-Write-Host "Description: $($checkpointDescriptions[$Checkpoint])" -ForegroundColor White
-Write-Host ""
-
-try {
-    # Reset to the checkpoint tag
-    git reset --hard $targetTag 2>&1 | Out-Null
-
-    # Clean untracked files
-    git clean -fd 2>&1 | Out-Null
-
-    # Ensure we're on main branch
-    $currentBranch = git branch --show-current
-    if ($currentBranch -ne 'main') {
-        git switch main 2>&1 | Out-Null
-        git reset --hard $targetTag 2>&1 | Out-Null
-    }
-
-    Write-Host "[SUCCESS] Reset to checkpoint '$Checkpoint' complete!" -ForegroundColor Green
-    Write-Host ""
-
-    # Show what to do next
-    switch ($Checkpoint) {
-        'start' {
-            Write-Host "Next steps:" -ForegroundColor Cyan
-            Write-Host "  1. Create a new branch: git switch -c feature-login" -ForegroundColor White
-            Write-Host "  2. Create login.py and make 2+ commits" -ForegroundColor White
-            Write-Host "  3. Verify: ..\verify.ps1 start" -ForegroundColor White
-        }
-        'merge' {
-            Write-Host "Next steps:" -ForegroundColor Cyan
-            Write-Host "  1. View branch structure: git log --oneline --graph --all" -ForegroundColor White
-            Write-Host "  2. Merge feature-login: git merge feature-login" -ForegroundColor White
-            Write-Host "  3. Verify: ..\verify.ps1 merge" -ForegroundColor White
-        }
-        'merge-conflict' {
-            Write-Host "Next steps:" -ForegroundColor Cyan
-            Write-Host "  1. Attempt merge: git merge update-config" -ForegroundColor White
-            Write-Host "  2. Resolve conflicts in config.json" -ForegroundColor White
-            Write-Host "  3. Complete merge: git add config.json && git commit" -ForegroundColor White
-            Write-Host "  4. Verify: ..\verify.ps1 merge-conflict" -ForegroundColor White
-        }
-    }
-
-    Write-Host ""
-    Write-Host "View current state: git log --oneline --graph --all" -ForegroundColor Cyan
-    Write-Host ""
-
-} catch {
-    Write-Host "[ERROR] Failed to reset to checkpoint." -ForegroundColor Red
-    Write-Host $_.Exception.Message -ForegroundColor Red
-    Pop-Location
-    exit 1
-}
-
-Pop-Location
-exit 0

01-essentials/03-branching-and-merging/setup.ps1

@@ -1,17 +1,13 @@
 #!/usr/bin/env pwsh
 <#
 .SYNOPSIS
-    Sets up the Module 03 checkpoint-based challenge environment.
+    Sets up the Module 03 challenge environment for branching and merging.
 
 .DESCRIPTION
-    This script creates a challenge directory with a complete Git repository
-    containing all commits and checkpoints for learning branching, merging,
-    and merge conflict resolution in one continuous workflow.
-
-    The script creates three checkpoints:
-    - checkpoint-start: Beginning of branching basics
-    - checkpoint-merge: Beginning of merging section
-    - checkpoint-merge-conflict: Beginning of conflict resolution
+    This script creates a challenge directory with a Git repository containing
+    a realistic project history with multiple merged branches. Students will see
+    what branching and merging looks like in practice, then create their own
+    branches to experiment.
 #>
 
 Write-Host "`n=== Setting up Module 03: Branching and Merging ===" -ForegroundColor Cyan
@@ -35,114 +31,89 @@ git init | Out-Null
 git config user.name "Workshop Student"
 git config user.email "student@example.com"
 
+# Detect the default branch name (could be main, master, etc.)
+# First commit creates the branch, so we detect it after that
+$mainBranch = git branch --show-current
+if (-not $mainBranch) {
+    # Fallback: Get default branch name from git config
+    $mainBranch = git config --get init.defaultBranch
+    if (-not $mainBranch) {
+        # Ultimate fallback: use "main"
+        $mainBranch = "main"
+    }
+}
+Write-Host "Default branch detected: $mainBranch" -ForegroundColor Yellow
+
 # ============================================================================
-# PHASE 1: Branching Basics - Initial commits on main
+# Create a realistic project history with multiple merged branches
 # ============================================================================
-Write-Host "`nPhase 1: Creating initial project structure..." -ForegroundColor Cyan
+Write-Host "Creating project history with multiple branches..." -ForegroundColor Cyan
 
-# Commit 1: Initial commit
-$mainContent = @"
-# main.py - Main application file
+# Initial commits on main
+$readmeContent = @"
+# My Application
 
-def main():
-    print("Welcome to the Application!")
-    print("This is the main branch")
-
-if __name__ == "__main__":
-    main()
+A sample application for learning Git branching and merging.
 "@
-Set-Content -Path "main.py" -Value $mainContent
+Set-Content -Path "README.md" -Value $readmeContent
 git add .
 git commit -m "Initial commit" | Out-Null
 
-# Commit 2: Add main functionality
 $mainContent = @"
 # main.py - Main application file
 
 def main():
     print("Welcome to the Application!")
-    print("This is the main branch")
-    run_application()
-
-def run_application():
-    print("Application is running...")
-    print("Ready for new features!")
 
 if __name__ == "__main__":
     main()
 "@
 Set-Content -Path "main.py" -Value $mainContent
 git add .
-git commit -m "Add main functionality" | Out-Null
-
-# Tag checkpoint-start (students begin here - will create feature-login)
-Write-Host "Creating checkpoint: start" -ForegroundColor Green
-git tag checkpoint-start
+git commit -m "Add main application file" | Out-Null
 
 # ============================================================================
-# PHASE 2: Create feature-login branch (what students will do in checkpoint 1)
+# Branch 1: feature-login (will be merged)
 # ============================================================================
-Write-Host "Phase 2: Creating feature-login branch..." -ForegroundColor Cyan
-
-# Create and switch to feature-login branch
+Write-Host "Creating feature-login branch..." -ForegroundColor Cyan
 git switch -c feature-login | Out-Null
 
-# Commit 3: Add login module
 $loginContent = @"
-# login.py - User login module
+# login.py - User authentication
 
 def login(username, password):
     """Authenticate a user."""
-    print(f"Authenticating user: {username}")
-    # TODO: Add actual authentication logic
-    return True
-
-def logout(username):
-    """Log out a user."""
-    print(f"Logging out user: {username}")
+    print(f"Logging in user: {username}")
     return True
 "@
 Set-Content -Path "login.py" -Value $loginContent
 git add .
 git commit -m "Add login module" | Out-Null
 
-# Commit 4: Add password validation
 $loginContent = @"
-# login.py - User login module
+# login.py - User authentication
 
 def validate_password(password):
     """Validate password strength."""
-    if len(password) < 8:
-        return False
-    return True
+    return len(password) >= 8
 
 def login(username, password):
     """Authenticate a user."""
     if not validate_password(password):
         print("Password too weak!")
         return False
-    print(f"Authenticating user: {username}")
-    # TODO: Add actual authentication logic
-    return True
-
-def logout(username):
-    """Log out a user."""
-    print(f"Logging out user: {username}")
+    print(f"Logging in user: {username}")
     return True
 "@
 Set-Content -Path "login.py" -Value $loginContent
 git add .
 git commit -m "Add password validation" | Out-Null
 
-# Switch back to main
-git switch main | Out-Null
+# Switch back to main branch
+git switch $mainBranch | Out-Null
 
-# Now create divergence - add commits to main while feature-login exists
-Write-Host "Creating divergent history on main..." -ForegroundColor Cyan
-
-# Commit 5: Add app.py with basic functionality
 $appContent = @"
-# app.py - Main application entry point
+# app.py - Application entry point
 
 from main import main
 
@@ -150,7 +121,6 @@ def run():
     """Run the application."""
     print("Starting application...")
     main()
-    print("Application finished.")
 
 if __name__ == "__main__":
     run()
@@ -159,16 +129,65 @@ Set-Content -Path "app.py" -Value $appContent
 git add .
 git commit -m "Add app.py entry point" | Out-Null
 
-# Commit 6: Add README
+# Merge feature-login into $mainBranch
+Write-Host "Merging feature-login into $mainBranch..." -ForegroundColor Green
+git merge feature-login --no-edit | Out-Null
+
+# ============================================================================
+# Branch 2: feature-api (will be merged)
+# ============================================================================
+Write-Host "Creating feature-api branch..." -ForegroundColor Cyan
+git switch -c feature-api | Out-Null
+
+$apiContent = @"
+# api.py - API endpoints
+
+def get_data():
+    """Retrieve data from API."""
+    return {"status": "ok", "data": []}
+
+def post_data(data):
+    """Send data to API."""
+    print(f"Posting data: {data}")
+    return {"status": "ok"}
+"@
+Set-Content -Path "api.py" -Value $apiContent
+git add .
+git commit -m "Add API module" | Out-Null
+
+$apiContent = @"
+# api.py - API endpoints
+
+def get_data():
+    """Retrieve data from API."""
+    return {"status": "ok", "data": []}
+
+def post_data(data):
+    """Send data to API."""
+    print(f"Posting data: {data}")
+    return {"status": "ok"}
+
+def delete_data(id):
+    """Delete data by ID."""
+    print(f"Deleting data: {id}")
+    return {"status": "ok"}
+"@
+Set-Content -Path "api.py" -Value $apiContent
+git add .
+git commit -m "Add delete endpoint to API" | Out-Null
+
+# Switch back to main branch and add documentation
+git switch $mainBranch | Out-Null
+
 $readmeContent = @"
 # My Application
 
-Welcome to my application!
+A sample application for learning Git branching and merging.
 
 ## Features
 
-- Main functionality
-- More features coming soon
+- User authentication
+- Main application logic
 
 ## Setup
 
@@ -176,104 +195,121 @@ Run: python app.py
 "@
 Set-Content -Path "README.md" -Value $readmeContent
 git add .
-git commit -m "Add README documentation" | Out-Null
+git commit -m "Update README with setup instructions" | Out-Null
 
-# Tag checkpoint-merge (students begin merging here - divergent branches ready)
-Write-Host "Creating checkpoint: merge" -ForegroundColor Green
-git tag checkpoint-merge
+# Merge feature-api into $mainBranch
+Write-Host "Merging feature-api into $mainBranch..." -ForegroundColor Green
+git merge feature-api --no-edit | Out-Null
 
 # ============================================================================
-# PHASE 3: Merge feature-login into main (what students will do in checkpoint 2)
+# Branch 3: feature-database (will be merged)
 # ============================================================================
-Write-Host "Phase 3: Merging feature-login into main..." -ForegroundColor Cyan
+Write-Host "Creating feature-database branch..." -ForegroundColor Cyan
+git switch -c feature-database | Out-Null
 
-# Merge feature-login into main (will create three-way merge commit)
-git merge feature-login --no-edit | Out-Null
+$dbContent = @"
+# database.py - Database operations
 
-# ============================================================================
-# PHASE 4: Create conflict scenario (what students will do in checkpoint 3)
-# ============================================================================
-Write-Host "Phase 4: Creating merge conflict scenario..." -ForegroundColor Cyan
+class Database:
+    def __init__(self):
+        self.connection = None
 
-# Create config.json file on main
-$initialConfig = @"
-{
-  "app": {
-    "name": "MyApp",
-    "version": "1.0.0",
-    "port": 3000
-  }
-}
+    def connect(self):
+        """Connect to database."""
+        print("Connecting to database...")
+        self.connection = True
+
+    def query(self, sql):
+        """Execute SQL query."""
+        print(f"Executing: {sql}")
+        return []
 "@
-Set-Content -Path "config.json" -Value $initialConfig
-git add config.json
-git commit -m "Add initial configuration" | Out-Null
+Set-Content -Path "database.py" -Value $dbContent
+git add .
+git commit -m "Add database module" | Out-Null
 
-# On main branch: Add timeout setting
-$mainConfig = @"
+$dbContent = @"
+# database.py - Database operations
+
+class Database:
+    def __init__(self):
+        self.connection = None
+
+    def connect(self):
+        """Connect to database."""
+        print("Connecting to database...")
+        self.connection = True
+
+    def disconnect(self):
+        """Disconnect from database."""
+        print("Disconnecting from database...")
+        self.connection = None
+
+    def query(self, sql):
+        """Execute SQL query."""
+        print(f"Executing: {sql}")
+        return []
+"@
+Set-Content -Path "database.py" -Value $dbContent
+git add .
+git commit -m "Add disconnect method" | Out-Null
+
+# Switch to main branch and add another commit (to create divergent history)
+git switch $mainBranch | Out-Null
+
+$configContent = @"
 {
   "app": {
-    "name": "MyApp",
-    "version": "1.0.0",
     "port": 3000,
-    "timeout": 5000
+    "debug": false
   }
 }
 "@
-Set-Content -Path "config.json" -Value $mainConfig
-git add config.json
-git commit -m "Add timeout configuration" | Out-Null
+Set-Content -Path "config.json" -Value $configContent
+git add .
+git commit -m "Add configuration file" | Out-Null
 
-# Create update-config branch from the commit before timeout was added
-git switch -c update-config HEAD~1 | Out-Null
+# Merge feature-database (will be three-way merge since main diverged)
+Write-Host "Merging feature-database into $mainBranch..." -ForegroundColor Green
+git merge feature-database --no-edit | Out-Null
 
-# On update-config branch: Add debug setting (conflicting change)
-$featureConfig = @"
-{
-  "app": {
-    "name": "MyApp",
-    "version": "1.0.0",
-    "port": 3000,
-    "debug": true
-  }
-}
+# Final update on main
+$readmeContent = @"
+# My Application
+
+A sample application for learning Git branching and merging.
+
+## Features
+
+- User authentication
+- API endpoints
+- Database operations
+- Main application logic
+
+## Setup
+
+Run: python app.py
+
+## Requirements
+
+- Python 3.6+
 "@
-Set-Content -Path "config.json" -Value $featureConfig
-git add config.json
-git commit -m "Add debug mode configuration" | Out-Null
-
-# Switch back to main
-git switch main | Out-Null
-
-# Tag checkpoint-merge-conflict (students begin conflict resolution here - on main with timeout, update-config has debug)
-Write-Host "Creating checkpoint: merge-conflict" -ForegroundColor Green
-git tag checkpoint-merge-conflict
-
-# ============================================================================
-# Reset to checkpoint-start so students begin at the beginning
-# ============================================================================
-Write-Host "`nResetting to checkpoint-start..." -ForegroundColor Yellow
-git reset --hard checkpoint-start | Out-Null
-git clean -fd | Out-Null
+Set-Content -Path "README.md" -Value $readmeContent
+git add .
+git commit -m "Update README with all features" | Out-Null
 
 # Return to module directory
 Set-Location ..
 
 Write-Host "`n=== Setup Complete! ===" -ForegroundColor Green
 Write-Host "`nYour challenge environment is ready in the 'challenge/' directory." -ForegroundColor Cyan
-Write-Host "`nThis module uses a CHECKPOINT SYSTEM:" -ForegroundColor Yellow
-Write-Host "  You'll work through 3 sections in one continuous repository:" -ForegroundColor White
-Write-Host "    1. Branching Basics (checkpoint: start)" -ForegroundColor White
-Write-Host "    2. Merging Branches (checkpoint: merge)" -ForegroundColor White
-Write-Host "    3. Resolving Merge Conflicts (checkpoint: merge-conflict)" -ForegroundColor White
-Write-Host "`nCommands:" -ForegroundColor Cyan
-Write-Host "  .\reset.ps1              - Show available checkpoints" -ForegroundColor White
-Write-Host "  .\reset.ps1 start        - Jump to branching section" -ForegroundColor White
-Write-Host "  .\reset.ps1 merge        - Jump to merging section" -ForegroundColor White
-Write-Host "  .\verify.ps1             - Verify all sections complete" -ForegroundColor White
-Write-Host "  .\verify.ps1 start       - Verify only branching section" -ForegroundColor White
+Write-Host "`nThe repository contains a realistic project history:" -ForegroundColor Yellow
+Write-Host "  - Multiple feature branches (login, api, database)" -ForegroundColor White
+Write-Host "  - All branches have been merged into $mainBranch" -ForegroundColor White
+Write-Host "  - View the history: git log --oneline --graph --all" -ForegroundColor White
 Write-Host "`nNext steps:" -ForegroundColor Cyan
 Write-Host "  1. Read the README.md for detailed instructions" -ForegroundColor White
 Write-Host "  2. cd challenge" -ForegroundColor White
-Write-Host "  3. Start with Checkpoint 1: Branching Basics" -ForegroundColor White
+Write-Host "  3. Explore the repository history: git log --oneline --graph --all" -ForegroundColor White
+Write-Host "  4. Create your own branches and practice merging!" -ForegroundColor White
 Write-Host ""

01-essentials/03-branching-and-merging/verify.ps1

@@ -1,34 +1,15 @@
 #!/usr/bin/env pwsh
 <#
 .SYNOPSIS
-    Verifies the Module 03 challenge solution (checkpoint-aware).
+    Verifies the Module 03 challenge solution.
 
 .DESCRIPTION
-    This script can verify completion of individual checkpoints or
-    the entire module. Without arguments, it verifies all checkpoints.
-
-.PARAMETER Checkpoint
-    The checkpoint to verify: start, merge, or merge-conflict.
-    If not specified, verifies all checkpoints.
-
-.EXAMPLE
-    .\verify.ps1
-    Verifies all three checkpoints are complete.
-
-.EXAMPLE
-    .\verify.ps1 start
-    Verifies only the branching basics checkpoint.
-
-.EXAMPLE
-    .\verify.ps1 merge
-    Verifies only the merging checkpoint.
+    This script checks that you've practiced branching and merging by:
+    - Creating at least one new branch (beyond the example branches)
+    - Making commits on your branch
+    - Merging your branch into main
 #>
 
-param(
-    [ValidateSet('start', 'merge', 'merge-conflict', '')]
-    [string]$Checkpoint = ''
-)
-
 $script:allChecksPassed = $true
 
 # ============================================================================
@@ -51,198 +32,15 @@ function Write-Hint {
     Write-Host "[HINT] $Message" -ForegroundColor Yellow
 }
 
-# ============================================================================
-# Checkpoint 1: Branching Basics Verification
-# ============================================================================
-
-function Verify-Branching {
-    Write-Host "`n=== Checkpoint 1: Branching Basics ===" -ForegroundColor Cyan
-
-    # Save current branch
-    $originalBranch = git branch --show-current 2>$null
-
-    # Check if feature-login branch exists
-    $branchExists = git branch --list "feature-login" 2>$null
-    if ($branchExists) {
-        Write-Pass "Branch 'feature-login' exists"
-    } else {
-        Write-Fail "Branch 'feature-login' not found"
-        Write-Hint "Create the branch with: git switch -c feature-login"
-        return
-    }
-
-    # Check if feature-login has commits beyond main (or if they've been merged)
-    $commitCount = git rev-list main..feature-login --count 2>$null
-    $mergeCommitExists = (git log --merges --oneline 2>$null | Select-String "Merge.*feature-login")
-
-    if ($mergeCommitExists -and $commitCount -eq 0) {
-        # Commits were merged into main - this is correct!
-        Write-Pass "Branch 'feature-login' commits have been merged into main"
-    } elseif ($commitCount -ge 2) {
-        Write-Pass "Branch 'feature-login' has $commitCount new commits"
-    } else {
-        Write-Fail "Branch 'feature-login' needs at least 2 new commits (found: $commitCount)"
-        Write-Hint "Make sure you've committed login.py and made at least one more commit"
-    }
-
-    # Switch to feature-login and check for login.py
-    git switch feature-login 2>$null | Out-Null
-    if (Test-Path "login.py") {
-        Write-Pass "File 'login.py' exists in feature-login branch"
-    } else {
-        Write-Fail "File 'login.py' not found in feature-login branch"
-        Write-Hint "Create login.py and commit it to the feature-login branch"
-    }
-
-    # Switch to main and verify login.py doesn't exist there yet (unless merged)
-    git switch main 2>$null | Out-Null
-
-    # Check if merge happened - if so, login.py can exist on main
-    $mergeCommitExists = (git log --merges --oneline 2>$null | Select-String "Merge.*feature-login")
-
-    if (-not $mergeCommitExists) {
-        # No merge yet - login.py should NOT be on main
-        if (-not (Test-Path "login.py")) {
-            Write-Pass "File 'login.py' does NOT exist in main branch (branches are independent!)"
-        } else {
-            Write-Fail "File 'login.py' should not exist in main branch yet (before merge)"
-            Write-Hint "Make sure you created login.py only on the feature-login branch"
-        }
-    }
-
-    # Switch back to original branch
-    if ($originalBranch) {
-        git switch $originalBranch 2>$null | Out-Null
-    }
+function Write-Info {
+    param([string]$Message)
+    Write-Host "[INFO] $Message" -ForegroundColor Cyan
 }
 
 # ============================================================================
-# Checkpoint 2: Merging Verification
+# Check challenge directory exists
 # ============================================================================
 
-function Verify-Merging {
-    Write-Host "`n=== Checkpoint 2: Merging Branches ===" -ForegroundColor Cyan
-
-    # Check current branch is main
-    $currentBranch = git branch --show-current 2>$null
-    if ($currentBranch -eq "main") {
-        Write-Pass "Currently on main branch"
-    } else {
-        Write-Fail "Should be on main branch (currently on: $currentBranch)"
-        Write-Hint "Switch to main with: git switch main"
-    }
-
-    # Check if login.py exists on main (indicates merge happened)
-    if (Test-Path "login.py") {
-        Write-Pass "File 'login.py' exists on main branch (merged successfully)"
-    } else {
-        Write-Fail "File 'login.py' not found on main branch"
-        Write-Hint "Merge feature-login into main with: git merge feature-login"
-    }
-
-    # Check for merge commit
-    $mergeCommitExists = (git log --merges --oneline 2>$null | Select-String "Merge.*feature-login")
-
-    if ($mergeCommitExists) {
-        Write-Pass "Merge commit exists"
-    } else {
-        Write-Fail "No merge commit found"
-        Write-Hint "Create a merge commit with: git merge feature-login"
-    }
-
-    # Check commit count (should have both branches' commits)
-    $commitCount = [int](git rev-list --count HEAD 2>$null)
-    if ($commitCount -ge 6) {
-        Write-Pass "Repository has $commitCount commits (merge complete)"
-    } else {
-        Write-Fail "Repository should have at least 6 commits after merge (found: $commitCount)"
-    }
-}
-
-# ============================================================================
-# Checkpoint 3: Merge Conflicts Verification
-# ============================================================================
-
-function Verify-MergeConflicts {
-    Write-Host "`n=== Checkpoint 3: Resolving Merge Conflicts ===" -ForegroundColor Cyan
-
-    # Check current branch is main
-    $currentBranch = git branch --show-current 2>$null
-    if ($currentBranch -eq "main") {
-        Write-Pass "Currently on main branch"
-    } else {
-        Write-Fail "Should be on main branch (currently on: $currentBranch)"
-        Write-Hint "Switch to main with: git switch main"
-    }
-
-    # Check that merge is not in progress
-    if (Test-Path ".git/MERGE_HEAD") {
-        Write-Fail "Merge is still in progress (conflicts not resolved)"
-        Write-Hint "Resolve conflicts in config.json, then: git add config.json && git commit"
-        return
-    } else {
-        Write-Pass "No merge in progress (conflicts resolved)"
-    }
-
-    # Check if config.json exists
-    if (Test-Path "config.json") {
-        Write-Pass "File 'config.json' exists"
-    } else {
-        Write-Fail "File 'config.json' not found"
-        Write-Hint "Merge update-config branch with: git merge update-config"
-        return
-    }
-
-    # Verify config.json is valid JSON
-    try {
-        $configContent = Get-Content "config.json" -Raw
-        $config = $configContent | ConvertFrom-Json -ErrorAction Stop
-        Write-Pass "File 'config.json' is valid JSON"
-    } catch {
-        Write-Fail "File 'config.json' is not valid JSON"
-        Write-Hint "Make sure you removed all conflict markers (<<<<<<<, =======, >>>>>>>)"
-        return
-    }
-
-    # Check for conflict markers
-    if ($configContent -match '<<<<<<<|=======|>>>>>>>') {
-        Write-Fail "Conflict markers still present in config.json"
-        Write-Hint "Remove all conflict markers (<<<<<<<, =======, >>>>>>>)"
-        return
-    } else {
-        Write-Pass "No conflict markers in config.json"
-    }
-
-    # Verify both settings are present (timeout and debug)
-    if ($config.app.timeout -eq 5000) {
-        Write-Pass "Timeout setting preserved (5000)"
-    } else {
-        Write-Fail "Timeout setting missing or incorrect"
-        Write-Hint "Keep the timeout: 5000 setting from main branch"
-    }
-
-    if ($config.app.debug -eq $true) {
-        Write-Pass "Debug setting preserved (true)"
-    } else {
-        Write-Fail "Debug setting missing or incorrect"
-        Write-Hint "Keep the debug: true setting from update-config branch"
-    }
-
-    # Verify merge commit exists for update-config
-    $updateConfigMerge = (git log --merges --oneline 2>$null | Select-String "Merge.*update-config")
-    if ($updateConfigMerge) {
-        Write-Pass "Merge commit exists for update-config branch"
-    } else {
-        Write-Fail "No merge commit found for update-config"
-        Write-Hint "Complete the merge with: git commit (after resolving conflicts)"
-    }
-}
-
-# ============================================================================
-# Main Script Logic
-# ============================================================================
-
-# Check if challenge directory exists
 if (-not (Test-Path "challenge")) {
     Write-Host "[ERROR] Challenge directory not found." -ForegroundColor Red
     Write-Host "Run .\setup.ps1 first to create the challenge environment." -ForegroundColor Yellow
@@ -251,7 +49,6 @@ if (-not (Test-Path "challenge")) {
 
 Push-Location "challenge"
 
-# Check if git repository exists
 if (-not (Test-Path ".git")) {
     Write-Host "[ERROR] Not a git repository." -ForegroundColor Red
     Write-Host "Run ..\setup.ps1 first to create the challenge environment." -ForegroundColor Yellow
@@ -259,62 +56,122 @@ if (-not (Test-Path ".git")) {
     exit 1
 }
 
-# Run appropriate verification
-if ($Checkpoint -eq '') {
-    # Verify all checkpoints
-    Write-Host "`n=== Verifying All Checkpoints ===" -ForegroundColor Cyan
+Write-Host "`n=== Verifying Module 03: Branching and Merging ===" -ForegroundColor Cyan
 
-    Verify-Branching
-    Verify-Merging
-    Verify-MergeConflicts
-
-} else {
-    # Verify specific checkpoint
-    switch ($Checkpoint) {
-        'start' { Verify-Branching }
-        'merge' { Verify-Merging }
-        'merge-conflict' { Verify-MergeConflicts }
+# ============================================================================
+# Detect the main branch name (could be main, master, etc.)
+# ============================================================================
+# Try to get the default branch from remote origin first
+$mainBranch = git symbolic-ref refs/remotes/origin/HEAD 2>$null | Split-Path -Leaf
+if (-not $mainBranch) {
+    # Fallback: try to detect from local branches
+    $allBranches = git branch --list 2>$null | ForEach-Object { $_.Trim('* ') }
+    if ($allBranches -contains "main") {
+        $mainBranch = "main"
+    } elseif ($allBranches -contains "master") {
+        $mainBranch = "master"
+    } else {
+        # Get the default branch from git config
+        $mainBranch = git config --get init.defaultBranch
+        if (-not $mainBranch) {
+            # Ultimate fallback: use the first branch
+            $mainBranch = $allBranches | Select-Object -First 1
+            if (-not $mainBranch) { $mainBranch = "main" }
+        }
     }
 }
+Write-Host "Detected main branch: $mainBranch" -ForegroundColor Cyan
+
+# ============================================================================
+# Count initial setup commits (should be 15 commits from setup)
+# ============================================================================
+$initialCommitCount = 15
+
+# ============================================================================
+# Check for new commits beyond setup
+# ============================================================================
+Write-Host "`nChecking your work..." -ForegroundColor Cyan
+
+$totalCommits = [int](git rev-list --count HEAD 2>$null)
+
+if ($totalCommits -gt $initialCommitCount) {
+    $newCommits = $totalCommits - $initialCommitCount
+    Write-Pass "Found $newCommits new commit(s) beyond the initial setup"
+} else {
+    Write-Fail "No new commits found"
+    Write-Hint "Create a branch, make some commits, and merge it into main"
+    Write-Hint "Example: git switch -c my-feature"
+}
+
+# ============================================================================
+# Check for branches (excluding the example branches)
+# ============================================================================
+$allBranches = git branch --list 2>$null | ForEach-Object { $_.Trim('* ') }
+$exampleBranches = @($mainBranch, 'feature-login', 'feature-api', 'feature-database')
+$studentBranches = $allBranches | Where-Object { $_ -notin $exampleBranches }
+
+if ($studentBranches.Count -gt 0) {
+    Write-Pass "Created $($studentBranches.Count) new branch(es): $($studentBranches -join ', ')"
+} else {
+    Write-Info "No new branches found (it's OK if you deleted them after merging)"
+    Write-Hint "To practice: git switch -c your-branch-name"
+}
+
+# ============================================================================
+# Check for merge commits by the student
+# ============================================================================
+$setupUser = "Workshop Student"
+$mergeCommits = git log --merges --format="%s" 2>$null
+
+# Count how many merge commits exist beyond the initial 3
+$totalMerges = ($mergeCommits | Measure-Object).Count
+$setupMerges = 3  # feature-login, feature-api, feature-database
+
+if ($totalMerges -gt $setupMerges) {
+    $studentMerges = $totalMerges - $setupMerges
+    Write-Pass "Performed $studentMerges merge(s) of your own work"
+} else {
+    Write-Fail "No merge commits found beyond the example merges"
+    Write-Hint "Create a branch, add commits, then merge it: git merge your-branch-name"
+}
+
+# ============================================================================
+# Check current branch
+# ============================================================================
+$currentBranch = git branch --show-current 2>$null
+if ($currentBranch -eq $mainBranch) {
+    Write-Pass "Currently on $mainBranch branch"
+} else {
+    Write-Info "Currently on '$currentBranch' branch"
+    Write-Hint "Typically you merge feature branches INTO $mainBranch"
+}
 
 Pop-Location
 
+# ============================================================================
 # Final summary
+# ============================================================================
 Write-Host ""
 if ($script:allChecksPassed) {
     Write-Host "=========================================" -ForegroundColor Green
     Write-Host "   CONGRATULATIONS! CHALLENGE PASSED!" -ForegroundColor Green
     Write-Host "=========================================" -ForegroundColor Green
-
-    if ($Checkpoint -eq '') {
-        Write-Host "`nYou've completed the entire module!" -ForegroundColor Cyan
-        Write-Host "You've mastered:" -ForegroundColor Cyan
-        Write-Host "  ✓ Creating and working with branches" -ForegroundColor White
-        Write-Host "  ✓ Merging branches together" -ForegroundColor White
-        Write-Host "  ✓ Resolving merge conflicts" -ForegroundColor White
-        Write-Host "`nReady for the next module!" -ForegroundColor Green
-    } else {
-        Write-Host "`nCheckpoint '$Checkpoint' complete!" -ForegroundColor Cyan
-
-        switch ($Checkpoint) {
-            'start' {
-                Write-Host "Next: Move to the merging checkpoint" -ForegroundColor White
-                Write-Host "  ..\reset.ps1 merge  OR  continue to merge feature-login" -ForegroundColor Yellow
-            }
-            'merge' {
-                Write-Host "Next: Move to the conflict resolution checkpoint" -ForegroundColor White
-                Write-Host "  ..\reset.ps1 merge-conflict" -ForegroundColor Yellow
-            }
-            'merge-conflict' {
-                Write-Host "Module complete! Ready for the next module!" -ForegroundColor Green
-            }
-        }
-    }
+    Write-Host "`nYou've successfully practiced:" -ForegroundColor Cyan
+    Write-Host "  ✓ Creating branches" -ForegroundColor White
+    Write-Host "  ✓ Making commits on branches" -ForegroundColor White
+    Write-Host "  ✓ Merging branches together" -ForegroundColor White
+    Write-Host "`nReady for the next module!" -ForegroundColor Green
     Write-Host ""
     exit 0
 } else {
-    Write-Host "[SUMMARY] Some checks failed. Review the hints above and try again." -ForegroundColor Red
-    Write-Host "[INFO] You can run this verification script as many times as needed." -ForegroundColor Yellow
+    Write-Host "[SUMMARY] Some checks failed. Review the hints above." -ForegroundColor Red
+    Write-Host ""
+    Write-Host "Quick guide:" -ForegroundColor Cyan
+    Write-Host "  1. Create a branch: git switch -c my-feature" -ForegroundColor White
+    Write-Host "  2. Make changes and commit them" -ForegroundColor White
+    Write-Host "  3. Switch to $mainBranch : git switch $mainBranch" -ForegroundColor White
+    Write-Host "  4. Merge your branch: git merge my-feature" -ForegroundColor White
+    Write-Host "  5. Run this verify script again" -ForegroundColor White
     Write-Host ""
     exit 1
 }

01-essentials/04-cherry-pick/README.md

@@ -1,160 +0,0 @@
-# Module 09: Cherry-Pick
-
-## Learning Objectives
-
-By the end of this module, you will:
-- Understand what cherry-picking is and how it works
-- Know when to use cherry-pick vs merge or rebase
-- Apply specific commits from one branch to another
-- Handle cherry-pick conflicts if they occur
-- Understand common use cases for cherry-picking
-
-## Challenge Description
-
-You have a `development` branch with several commits. Some of these commits are bug fixes that need to be applied to the `main` branch immediately, but other commits are experimental features that shouldn't be merged yet.
-
-Your task is to:
-1. Review the commits on the development branch
-2. Identify which commits are bug fixes
-3. Cherry-pick only the bug fix commits to the main branch
-4. Verify that main has the bug fixes but not the experimental features
-
-## Key Concepts
-
-### What is Cherry-Pick?
-
-Cherry-pick allows you to apply a specific commit from one branch to another. Instead of merging an entire branch, you can selectively choose individual commits.
-
-```
-    A---B---C---D development
-   /
-  E---F main
-```
-
-After cherry-picking commit C:
-```
-    A---B---C---D development
-   /
-  E---F---C' main
-```
-
-Note that C' is a new commit with the same changes as C but a different commit hash.
-
-### Cherry-Pick vs Merge vs Rebase
-
-- **Merge**: Brings all commits from another branch and creates a merge commit
-- **Rebase**: Replays all commits from your branch on top of another branch
-- **Cherry-Pick**: Applies one or more specific commits to your current branch
-
-### When to Use Cherry-Pick
-
-Cherry-pick is useful when you:
-- Need a bug fix from a feature branch but can't merge the whole branch yet
-- Want to apply a specific commit to a release branch
-- Need to backport a fix to an older version
-- Made a commit on the wrong branch and need to move it
-- Want to duplicate a commit across multiple branches
-
-### Cherry-Pick Creates New Commits
-
-Important: Cherry-picked commits are new commits with different hashes. The original commit remains on the source branch, and a copy is created on the target branch with the same changes but a different commit ID.
-
-## Useful Commands
-
-```bash
-# View commits on another branch
-git log <branch-name> --oneline
-
-# View a specific commit's details
-git show <commit-hash>
-
-# Cherry-pick a single commit
-git cherry-pick <commit-hash>
-
-# Cherry-pick multiple commits
-git cherry-pick <commit-hash1> <commit-hash2>
-
-# Cherry-pick a range of commits
-git cherry-pick <start-hash>..<end-hash>
-
-# If conflicts occur during cherry-pick:
-# 1. Resolve conflicts in files
-# 2. Stage the resolved files
-git add <file>
-# 3. Continue the cherry-pick
-git cherry-pick --continue
-
-# Abort a cherry-pick if something goes wrong
-git cherry-pick --abort
-
-# View commit history graph
-git log --oneline --graph --all
-```
-
-## Verification
-
-Run the verification script to check your solution:
-
-```bash
-.\verify.ps1
-```
-
-The verification will check that:
-- You're on the main branch
-- The security bug fix commit has been applied to main
-- The performance bug fix commit has been applied to main
-- The experimental features are NOT on main
-- The commits were cherry-picked (not merged)
-
-## Challenge Steps
-
-1. Navigate to the challenge directory
-2. You're currently on the development branch
-3. View the commits: `git log --oneline`
-4. You'll see several commits - identify the bug fixes
-5. Switch to main branch: `git switch main`
-6. Cherry-pick the bug fix commits (you'll need their commit hashes)
-7. Verify the result with `git log --oneline`
-8. Run the verification script
-
-## Tips
-
-- Use `git log development --oneline` to see commits on the development branch
-- Use `git show <hash>` to view details of a specific commit
-- You can cherry-pick by commit hash - you only need the first 7 characters
-- Cherry-pick commits in chronological order (oldest first) to avoid conflicts
-- If you make a mistake, use `.\reset.ps1` to start over
-- The commit message will be preserved when cherry-picking
-
-## Common Cherry-Pick Scenarios
-
-### Hotfix to Production
-You have a critical bug fix on a development branch that needs to go to production immediately:
-```bash
-git switch production
-git cherry-pick <bugfix-commit-hash>
-```
-
-### Wrong Branch
-You accidentally committed on the wrong branch:
-```bash
-# On wrong branch, note the commit hash
-git log --oneline
-# Switch to correct branch
-git switch correct-branch
-git cherry-pick <commit-hash>
-# Go back and remove from wrong branch
-git switch wrong-branch
-git reset --hard HEAD~1
-```
-
-### Backporting
-You need to apply a fix to an older release branch:
-```bash
-git switch release-2.0
-git cherry-pick <fix-from-main>
-```
-
-## What You'll Learn
-
-Cherry-pick is a surgical tool in your Git toolbox. While merge and rebase work with entire branches, cherry-pick lets you be selective about which changes to apply. This is invaluable for managing hotfixes, maintaining multiple release branches, and handling situations where you need specific changes without bringing along everything else. Understanding when to use cherry-pick versus other Git operations is a mark of Git expertise.

01-essentials/04-merge-conflict/README.md

@@ -0,0 +1,487 @@
+# Module 04: Merge Conflicts
+
+## Learning Objectives
+
+By the end of this module, you will:
+- Understand what merge conflicts are and why they occur
+- Use `git diff` to discover changes between branches
+- Identify merge conflicts in your repository
+- Read and interpret conflict markers (`<<<<<<<`, `=======`, `>>>>>>>`)
+- Resolve merge conflicts manually
+- Complete a merge after resolving conflicts
+
+## Setup
+
+Create the challenge environment:
+
+```bash
+.\setup.ps1
+```
+
+This creates a repository with two feature branches that have conflicting changes.
+
+## Overview
+
+A **merge conflict** occurs when Git cannot automatically combine changes because both branches modified the same part of the same file in different ways.
+
+**When do conflicts happen?**
+- ✅ Two branches modify the same lines in a file
+- ✅ One branch deletes a file that another branch modifies
+- ✅ Complex changes Git can't merge automatically
+- ❌ Different files are changed (no conflict!)
+- ❌ Different parts of the same file are changed (no conflict!)
+
+**Don't fear conflicts!** They're a normal part of collaborative development. Git just needs your help to decide what the final code should look like.
+
+## Your Task
+
+###  Part 1: Discover the Changes
+
+Before merging, it's good practice to see what each branch changed:
+
+```bash
+cd challenge
+
+# Check which branch you're on
+git branch
+
+# View all branches
+git branch --all
+```
+
+You'll see three branches: `main`, `add-timeout`, and `add-debug`.
+
+**Discover what each branch changed:**
+
+```bash
+# Compare main with add-timeout
+git diff main add-timeout
+
+# Compare main with add-debug
+git diff main add-debug
+
+# Compare the two feature branches directly
+git diff add-timeout add-debug
+```
+
+**What did you discover?**
+- Both branches modified `config.json`
+- They both added a line in the same location (after `"port": 3000`)
+- One adds `"timeout": 5000`
+- The other adds `"debug": true`
+
+This is a recipe for a conflict!
+
+### Part 2: Merge the First Branch (No Conflict)
+
+Let's merge `add-timeout` first:
+
+```bash
+# Make sure you're on main
+git switch main
+
+# Merge the first branch
+git merge add-timeout
+```
+
+✅ **Success!** This merge works because main hasn't changed since add-timeout was created.
+
+```bash
+# View the updated config
+cat config.json
+
+# Check the history
+git log --oneline --graph --all
+```
+
+### Part 3: Try to Merge the Second Branch (Conflict!)
+
+Now let's try to merge `add-debug`:
+
+```bash
+# Still on main
+git merge add-debug
+```
+
+💥 **Boom!** You'll see:
+
+```
+Auto-merging config.json
+CONFLICT (content): Merge conflict in config.json
+Automatic merge failed; fix conflicts and then commit the result.
+```
+
+**Don't panic!** This is expected. Git is asking for your help.
+
+### Part 4: Check the Status
+
+```bash
+git status
+```
+
+You'll see:
+
+```
+On branch main
+You have unmerged paths.
+  (fix conflicts and run "git commit")
+  (use "git merge --abort" to abort the merge)
+
+Unmerged paths:
+  (use "git add <file>..." to mark resolution)
+        both modified:   config.json
+```
+
+This tells you that `config.json` needs your attention!
+
+### Part 5: Open and Examine the Conflicted File
+
+Open `config.json` in your text editor:
+
+```bash
+# On Windows
+notepad config.json
+
+# Or use VS Code
+code config.json
+```
+
+You'll see special **conflict markers**:
+
+```json
+{
+  "app": {
+    "name": "MyApp",
+    "version": "1.0.0",
+    "port": 3000,
+<<<<<<< HEAD
+    "timeout": 5000
+=======
+    "debug": true
+>>>>>>> add-debug
+  }
+}
+```
+
+### Part 6: Understand the Conflict Markers
+
+Let's break down what you're seeing:
+
+```
+<<<<<<< HEAD
+    "timeout": 5000        ← Your current branch (main, which has add-timeout merged)
+=======
+    "debug": true          ← The branch you're merging (add-debug)
+>>>>>>> add-debug
+```
+
+**What each marker means:**
+- `<<<<<<< HEAD` - Start of your changes (current branch)
+- `=======` - Separator between the two versions
+- `>>>>>>> add-debug` - End of their changes (branch being merged)
+
+### Part 7: Resolve the Conflict
+
+You have three options:
+
+**Option 1: Keep ONLY your changes (timeout)**
+```json
+    "timeout": 5000
+```
+
+**Option 2: Keep ONLY their changes (debug)**
+```json
+    "debug": true
+```
+
+**Option 3: Keep BOTH changes** ← **Do this!**
+```json
+    "timeout": 5000,
+    "debug": true
+```
+
+### Part 8: Edit the File
+
+For this challenge, we want **both settings**, so:
+
+1. Delete ALL the conflict markers:
+   - Remove `<<<<<<< HEAD`
+   - Remove `=======`
+   - Remove `>>>>>>> add-debug`
+
+2. Keep both settings:
+
+**Before (with conflict markers):**
+```json
+{
+  "app": {
+    "name": "MyApp",
+    "version": "1.0.0",
+    "port": 3000,
+<<<<<<< HEAD
+    "timeout": 5000
+=======
+    "debug": true
+>>>>>>> add-debug
+  }
+}
+```
+
+**After (resolved):**
+```json
+{
+  "app": {
+    "name": "MyApp",
+    "version": "1.0.0",
+    "port": 3000,
+    "timeout": 5000,
+    "debug": true
+  }
+}
+```
+
+**Important:**
+- Remove ALL markers
+- Add a comma after `"timeout": 5000` (for valid JSON)
+- Ensure the file is valid JSON
+
+3. Save the file
+
+### Part 9: Mark the Conflict as Resolved
+
+Tell Git you've resolved the conflict:
+
+```bash
+# Stage the resolved file
+git add config.json
+
+# Check status
+git status
+```
+
+You should see:
+
+```
+On branch main
+All conflicts fixed but you are still merging.
+  (use "git commit" to conclude merge)
+```
+
+Perfect! Git confirms the conflict is resolved.
+
+### Part 10: Complete the Merge
+
+Commit the merge:
+
+```bash
+git commit
+```
+
+Git will open an editor with a default merge message. You can accept it or customize it, then save and close.
+
+**Done!** Your merge is complete!
+
+```bash
+# View the final result
+cat config.json
+
+# View the history
+git log --oneline --graph --all
+```
+
+You should see both `timeout` and `debug` in the config!
+
+### Part 11: Verify Your Solution
+
+From the module directory (not inside challenge/):
+
+```bash
+.\verify.ps1
+```
+
+## Understanding Conflict Markers
+
+### Anatomy of a Conflict
+
+```
+<<<<<<< HEAD            ← Marker: Start of your version
+Your changes here
+=======                 ← Marker: Separator
+Their changes here
+>>>>>>> branch-name     ← Marker: End of their version
+```
+
+### Common Conflict Patterns
+
+**Simple conflict:**
+```
+<<<<<<< HEAD
+print("Hello")
+=======
+print("Hi")
+>>>>>>> feature
+```
+Decision: Which greeting do you want?
+
+**Both are needed:**
+```
+<<<<<<< HEAD
+timeout: 5000
+=======
+debug: true
+>>>>>>> feature
+```
+Decision: Keep both (add comma)!
+
+**Deletion conflict:**
+```
+<<<<<<< HEAD
+# Function deleted on your branch
+=======
+def old_function():
+    pass
+>>>>>>> feature
+```
+Decision: Delete or keep the function?
+
+## Common Mistakes to Avoid
+
+❌ **Forgetting to remove conflict markers**
+```json
+<<<<<<< HEAD    ← Don't leave these in!
+    "timeout": 5000,
+    "debug": true
+>>>>>>> add-debug    ← Don't leave these in!
+```
+This breaks your code! Always remove ALL markers.
+
+❌ **Committing without staging**
+```bash
+git commit    # Error! You didn't add the file
+```
+Always `git add` the resolved file first!
+
+❌ **Keeping only one side when both are needed**
+If you delete one setting, you lose that work!
+
+❌ **Breaking syntax**
+```json
+"timeout": 5000    ← Missing comma!
+"debug": true
+```
+Always verify your file is valid after resolving!
+
+❌ **Not testing the result**
+Always check that your resolved code works!
+
+## Aborting a Merge
+
+Changed your mind? You can abort the merge anytime before committing:
+
+```bash
+git merge --abort
+```
+
+This returns your repository to the state before you started the merge. No harm done!
+
+## Key Commands
+
+```bash
+# Discover changes before merging
+git diff branch1 branch2
+
+# Attempt a merge
+git merge <branch-name>
+
+# Check which files have conflicts
+git status
+
+# Abort the merge and start over
+git merge --abort
+
+# After resolving conflicts:
+git add <resolved-file>
+git commit
+
+# View conflicts in a different style
+git diff --ours         # Your changes
+git diff --theirs       # Their changes
+git diff --base         # Original version
+```
+
+## Pro Tips
+
+💡 **Use `git diff` first**
+Always compare branches before merging:
+```bash
+git diff main..feature-branch
+```
+
+💡 **Prevent conflicts**
+- Pull changes frequently
+- Communicate with your team about who's working on what
+- Keep branches short-lived and merge often
+
+💡 **Make conflicts easier**
+- Work on different files when possible
+- Make small, focused commits
+- If editing the same file, coordinate with teammates
+
+💡 **When stuck**
+- Read the conflict markers carefully
+- Look at `git log` to understand what each side changed
+- Use `git diff` to see the changes
+- Ask a teammate to review your resolution
+- Use a merge tool: `git mergetool`
+
+## Merge Tools
+
+Git supports visual merge tools that make resolving conflicts easier:
+
+```bash
+# Configure a merge tool (one-time setup)
+git config --global merge.tool vscode  # or meld, kdiff3, etc.
+
+# Use the merge tool during a conflict
+git mergetool
+```
+
+This opens a visual interface showing both versions side-by-side.
+
+## Real-World Scenario
+
+This exercise simulates a common real-world situation:
+
+**Scenario:** Two developers working on the same file
+- Alice adds a timeout configuration
+- Bob adds debug mode configuration
+- Both push their changes
+- When Bob tries to merge, he gets a conflict
+- Bob resolves it by keeping both changes
+- Everyone's work is preserved!
+
+This happens all the time in team development. Conflicts are normal!
+
+## What You've Learned
+
+After completing this module, you understand:
+
+- ✅ Merge conflicts happen when the same lines are changed differently
+- ✅ `git diff` helps you discover changes before merging
+- ✅ Conflict markers show both versions
+- ✅ You decide what the final code should look like
+- ✅ Remove all markers before committing
+- ✅ Test your resolution to ensure it works
+- ✅ Conflicts are normal and easy to resolve with practice
+
+## Next Steps
+
+Ready to continue? The next module covers **cherry-picking** - selectively applying specific commits from one branch to another.
+
+To start over:
+```bash
+.\reset.ps1
+.\setup.ps1
+```
+
+**Need help?** Review the steps above, or run `git status` to see what Git suggests!

01-essentials/04-merge-conflict/reset.ps1

@@ -0,0 +1,23 @@
+#!/usr/bin/env pwsh
+<#
+.SYNOPSIS
+    Resets the Module 04 challenge environment.
+
+.DESCRIPTION
+    This script removes the challenge directory, allowing you to start fresh.
+    Run setup.ps1 again after resetting to recreate the environment.
+#>
+
+Write-Host "`n=== Resetting Module 04 Challenge ===" -ForegroundColor Cyan
+
+if (Test-Path "challenge") {
+    Write-Host "Removing challenge directory..." -ForegroundColor Yellow
+    Remove-Item -Recurse -Force "challenge"
+    Write-Host "`n[SUCCESS] Challenge environment reset complete!" -ForegroundColor Green
+    Write-Host "`nRun .\setup.ps1 to create a fresh challenge environment." -ForegroundColor Cyan
+    Write-Host ""
+} else {
+    Write-Host "`n[INFO] No challenge directory found. Nothing to reset." -ForegroundColor Yellow
+    Write-Host "Run .\setup.ps1 to create the challenge environment." -ForegroundColor Cyan
+    Write-Host ""
+}

01-essentials/04-merge-conflict/setup.ps1

@@ -0,0 +1,138 @@
+#!/usr/bin/env pwsh
+<#
+.SYNOPSIS
+    Sets up the Module 04 challenge environment for merge conflicts.
+
+.DESCRIPTION
+    This script creates a challenge directory with a Git repository containing
+    two feature branches that have conflicting changes to the same file.
+    Students will learn to identify, understand, and resolve merge conflicts.
+#>
+
+Write-Host "`n=== Setting up Module 04: Merge Conflicts ===" -ForegroundColor Cyan
+
+# Remove existing challenge directory if it exists
+if (Test-Path "challenge") {
+    Write-Host "Removing existing challenge directory..." -ForegroundColor Yellow
+    Remove-Item -Recurse -Force "challenge"
+}
+
+# Create fresh challenge directory
+Write-Host "Creating challenge directory..." -ForegroundColor Green
+New-Item -ItemType Directory -Path "challenge" | Out-Null
+Set-Location "challenge"
+
+# Initialize Git repository
+Write-Host "Initializing Git repository..." -ForegroundColor Green
+git init | Out-Null
+
+# Configure git for this repository
+git config user.name "Workshop Student"
+git config user.email "student@example.com"
+
+# Detect the default branch name (could be main, master, etc.)
+# First commit creates the branch, so we detect it after that
+$mainBranch = git branch --show-current
+if (-not $mainBranch) {
+    # Fallback: Get default branch name from git config
+    $mainBranch = git config --get init.defaultBranch
+    if (-not $mainBranch) {
+        # Ultimate fallback: use "main"
+        $mainBranch = "main"
+    }
+}
+Write-Host "Default branch detected: $mainBranch" -ForegroundColor Yellow
+
+# ============================================================================
+# Create base project
+# ============================================================================
+Write-Host "Creating base project..." -ForegroundColor Cyan
+
+# Initial commit with config file
+$configContent = @"
+{
+  "app": {
+    "name": "MyApp",
+    "version": "1.0.0",
+    "port": 3000
+  }
+}
+"@
+Set-Content -Path "config.json" -Value $configContent
+git add .
+git commit -m "Initial commit with config" | Out-Null
+
+# Add README
+$readmeContent = @"
+# My Application
+
+A simple application for learning merge conflicts.
+
+## Configuration
+
+Edit `config.json` to configure the application.
+"@
+Set-Content -Path "README.md" -Value $readmeContent
+git add .
+git commit -m "Add README" | Out-Null
+
+# ============================================================================
+# Branch 1: add-timeout (adds timeout setting)
+# ============================================================================
+Write-Host "Creating add-timeout branch..." -ForegroundColor Cyan
+git switch -c add-timeout | Out-Null
+
+$timeoutConfig = @"
+{
+  "app": {
+    "name": "MyApp",
+    "version": "1.0.0",
+    "port": 3000,
+    "timeout": 5000
+  }
+}
+"@
+Set-Content -Path "config.json" -Value $timeoutConfig
+git add .
+git commit -m "Add timeout configuration" | Out-Null
+
+# ============================================================================
+# Branch 2: add-debug (adds debug setting - CONFLICTS with timeout!)
+# ============================================================================
+Write-Host "Creating add-debug branch..." -ForegroundColor Cyan
+git switch $mainBranch | Out-Null
+git switch -c add-debug | Out-Null
+
+$debugConfig = @"
+{
+  "app": {
+    "name": "MyApp",
+    "version": "1.0.0",
+    "port": 3000,
+    "debug": true
+  }
+}
+"@
+Set-Content -Path "config.json" -Value $debugConfig
+git add .
+git commit -m "Add debug mode configuration" | Out-Null
+
+# Switch back to main branch
+git switch $mainBranch | Out-Null
+
+# Return to module directory
+Set-Location ..
+
+Write-Host "`n=== Setup Complete! ===" -ForegroundColor Green
+Write-Host "`nYour challenge environment is ready in the 'challenge/' directory." -ForegroundColor Cyan
+Write-Host "`nThe repository contains:" -ForegroundColor Yellow
+Write-Host "  - $mainBranch branch: base configuration" -ForegroundColor White
+Write-Host "  - add-timeout branch: adds timeout setting" -ForegroundColor White
+Write-Host "  - add-debug branch: adds debug setting" -ForegroundColor White
+Write-Host "`nBoth branches modify the same part of config.json!" -ForegroundColor Red
+Write-Host "This will cause a merge conflict when you try to merge both." -ForegroundColor Red
+Write-Host "`nNext steps:" -ForegroundColor Cyan
+Write-Host "  1. Read the README.md for detailed instructions" -ForegroundColor White
+Write-Host "  2. cd challenge" -ForegroundColor White
+Write-Host "  3. Follow the guide to discover and resolve the conflict" -ForegroundColor White
+Write-Host ""

01-essentials/04-merge-conflict/verify.ps1

@@ -0,0 +1,232 @@
+#!/usr/bin/env pwsh
+<#
+.SYNOPSIS
+    Verifies the Module 04 challenge solution.
+
+.DESCRIPTION
+    This script checks that you've successfully resolved the merge conflict by:
+    - Merging both branches into main
+    - Resolving the conflict in config.json
+    - Keeping both timeout and debug settings
+    - Ensuring valid JSON syntax
+#>
+
+$script:allChecksPassed = $true
+
+# ============================================================================
+# Helper Functions
+# ============================================================================
+
+function Write-Pass {
+    param([string]$Message)
+    Write-Host "[PASS] $Message" -ForegroundColor Green
+}
+
+function Write-Fail {
+    param([string]$Message)
+    Write-Host "[FAIL] $Message" -ForegroundColor Red
+    $script:allChecksPassed = $false
+}
+
+function Write-Hint {
+    param([string]$Message)
+    Write-Host "[HINT] $Message" -ForegroundColor Yellow
+}
+
+function Write-Info {
+    param([string]$Message)
+    Write-Host "[INFO] $Message" -ForegroundColor Cyan
+}
+
+# ============================================================================
+# Check challenge directory exists
+# ============================================================================
+
+if (-not (Test-Path "challenge")) {
+    Write-Host "[ERROR] Challenge directory not found." -ForegroundColor Red
+    Write-Host "Run .\setup.ps1 first to create the challenge environment." -ForegroundColor Yellow
+    exit 1
+}
+
+Push-Location "challenge"
+
+if (-not (Test-Path ".git")) {
+    Write-Host "[ERROR] Not a git repository." -ForegroundColor Red
+    Write-Host "Run ..\setup.ps1 first to create the challenge environment." -ForegroundColor Yellow
+    Pop-Location
+    exit 1
+}
+
+Write-Host "`n=== Verifying Module 04: Merge Conflicts ===" -ForegroundColor Cyan
+
+# ============================================================================
+# Detect the main branch name (could be main, master, etc.)
+# ============================================================================
+# Try to get the default branch from remote origin first
+$mainBranch = git symbolic-ref refs/remotes/origin/HEAD 2>$null | Split-Path -Leaf
+if (-not $mainBranch) {
+    # Fallback: try to detect from local branches
+    $allBranches = git branch --list 2>$null | ForEach-Object { $_.Trim('* ') }
+    if ($allBranches -contains "main") {
+        $mainBranch = "main"
+    } elseif ($allBranches -contains "master") {
+        $mainBranch = "master"
+    } else {
+        # Get the default branch from git config
+        $mainBranch = git config --get init.defaultBranch
+        if (-not $mainBranch) {
+            # Ultimate fallback: use the first branch
+            $mainBranch = $allBranches | Select-Object -First 1
+            if (-not $mainBranch) { $mainBranch = "main" }
+        }
+    }
+}
+Write-Host "Detected main branch: $mainBranch" -ForegroundColor Cyan
+
+# ============================================================================
+# Check current branch
+# ============================================================================
+$currentBranch = git branch --show-current 2>$null
+if ($currentBranch -eq $mainBranch) {
+    Write-Pass "Currently on $mainBranch branch"
+} else {
+    Write-Fail "Should be on $mainBranch branch (currently on: $currentBranch)"
+    Write-Hint "Switch to $mainBranch with: git switch $mainBranch"
+}
+
+# ============================================================================
+# Check that merge is not in progress
+# ============================================================================
+if (Test-Path ".git/MERGE_HEAD") {
+    Write-Fail "Merge is still in progress (conflicts not resolved)"
+    Write-Hint "Resolve conflicts in config.json, then: git add config.json && git commit"
+    Pop-Location
+    exit 1
+} else {
+    Write-Pass "No merge in progress (conflicts resolved)"
+}
+
+# ============================================================================
+# Check if config.json exists
+# ============================================================================
+if (-not (Test-Path "config.json")) {
+    Write-Fail "File 'config.json' not found"
+    Write-Hint "The config.json file should exist"
+    Pop-Location
+    exit 1
+}
+
+# ============================================================================
+# Verify config.json is valid JSON
+# ============================================================================
+try {
+    $configContent = Get-Content "config.json" -Raw
+    $config = $configContent | ConvertFrom-Json -ErrorAction Stop
+    Write-Pass "File 'config.json' is valid JSON"
+} catch {
+    Write-Fail "File 'config.json' is not valid JSON"
+    Write-Hint "Make sure you removed all conflict markers (<<<<<<<, =======, >>>>>>>)"
+    Write-Hint "Check for missing commas or brackets"
+    Pop-Location
+    exit 1
+}
+
+# ============================================================================
+# Check for conflict markers
+# ============================================================================
+if ($configContent -match '<<<<<<<|=======|>>>>>>>') {
+    Write-Fail "Conflict markers still present in config.json"
+    Write-Hint "Remove all conflict markers (<<<<<<<, =======, >>>>>>>)"
+    Pop-Location
+    exit 1
+} else {
+    Write-Pass "No conflict markers in config.json"
+}
+
+# ============================================================================
+# Verify both settings are present (timeout and debug)
+# ============================================================================
+if ($config.app.timeout -eq 5000) {
+    Write-Pass "Timeout setting preserved (5000)"
+} else {
+    Write-Fail "Timeout setting missing or incorrect"
+    Write-Hint "Keep the timeout: 5000 setting from add-timeout branch"
+}
+
+if ($config.app.debug -eq $true) {
+    Write-Pass "Debug setting preserved (true)"
+} else {
+    Write-Fail "Debug setting missing or incorrect"
+    Write-Hint "Keep the debug: true setting from add-debug branch"
+}
+
+# ============================================================================
+# Verify both branches were merged
+# ============================================================================
+$addTimeoutMerged = git log --oneline --grep="add-timeout" 2>$null | Select-String "Merge"
+$addDebugMerged = git log --oneline --grep="add-debug" 2>$null | Select-String "Merge"
+
+if ($addTimeoutMerged) {
+    Write-Pass "add-timeout branch has been merged"
+} else {
+    # Check if it was a fast-forward merge (commits exist but no merge commit)
+    $timeoutCommit = git log --oneline --grep="Add timeout configuration" 2>$null
+    if ($timeoutCommit) {
+        Write-Pass "add-timeout branch changes are in main"
+    } else {
+        Write-Fail "add-timeout branch not merged"
+        Write-Hint "Merge with: git merge add-timeout"
+    }
+}
+
+if ($addDebugMerged) {
+    Write-Pass "add-debug branch has been merged"
+} else {
+    Write-Fail "add-debug branch not merged"
+    Write-Hint "Merge with: git merge add-debug"
+}
+
+# ============================================================================
+# Check commit count (should have both merges)
+# ============================================================================
+$totalCommits = [int](git rev-list --count HEAD 2>$null)
+if ($totalCommits -ge 5) {
+    Write-Pass "Repository has $totalCommits commits (all merges complete)"
+} else {
+    Write-Info "Repository has $totalCommits commits"
+    Write-Hint "Make sure both branches are merged"
+}
+
+Pop-Location
+
+# ============================================================================
+# Final summary
+# ============================================================================
+Write-Host ""
+if ($script:allChecksPassed) {
+    Write-Host "=========================================" -ForegroundColor Green
+    Write-Host "   CONGRATULATIONS! CHALLENGE PASSED!" -ForegroundColor Green
+    Write-Host "=========================================" -ForegroundColor Green
+    Write-Host "`nYou've successfully:" -ForegroundColor Cyan
+    Write-Host "  ✓ Discovered changes using git diff" -ForegroundColor White
+    Write-Host "  ✓ Merged the first branch" -ForegroundColor White
+    Write-Host "  ✓ Encountered a merge conflict" -ForegroundColor White
+    Write-Host "  ✓ Resolved the conflict by keeping both changes" -ForegroundColor White
+    Write-Host "  ✓ Completed the merge" -ForegroundColor White
+    Write-Host "`nYou're now ready to handle merge conflicts in real projects!" -ForegroundColor Green
+    Write-Host ""
+    exit 0
+} else {
+    Write-Host "[SUMMARY] Some checks failed. Review the hints above." -ForegroundColor Red
+    Write-Host ""
+    Write-Host "Quick guide:" -ForegroundColor Cyan
+    Write-Host "  1. Make sure you're on $mainBranch : git switch $mainBranch" -ForegroundColor White
+    Write-Host "  2. Merge first branch: git merge add-timeout" -ForegroundColor White
+    Write-Host "  3. Merge second branch: git merge add-debug" -ForegroundColor White
+    Write-Host "  4. Resolve conflict: edit config.json, remove markers, keep both settings" -ForegroundColor White
+    Write-Host "  5. Stage resolved file: git add config.json" -ForegroundColor White
+    Write-Host "  6. Complete merge: git commit" -ForegroundColor White
+    Write-Host "  7. Run this verify script again" -ForegroundColor White
+    Write-Host ""
+    exit 1
+}

01-essentials/05-cherry-pick/README.md

@@ -0,0 +1,363 @@
+# Module 05: Cherry-Pick
+
+## Learning Objectives
+
+By the end of this module, you will:
+- Understand what cherry-picking is and how it works
+- Know when to use cherry-pick vs merge or rebase
+- Apply specific commits from one branch to another
+- Understand common use cases for cherry-picking
+- Learn how cherry-pick creates new commits with different hashes
+
+## Setup
+
+Create the challenge environment:
+
+```pwsh
+.\setup.ps1
+```
+
+This creates a repository with a `development` branch containing both bug fixes and experimental features.
+
+## Overview
+
+**Cherry-pick** allows you to copy specific commits from one branch to another. Unlike merging (which brings ALL commits), cherry-pick lets you be surgical about exactly which changes you want to apply.
+
+Think of it like picking cherries from a tree - you select only the ripe ones you want, leaving the rest behind.
+
+### Why Use Cherry-Pick?
+
+- **Selective deployment** - Apply critical bug fixes without merging unfinished features
+- **Hotfixes** - Quickly move a fix from development to production
+- **Backporting** - Apply fixes to older release branches
+- **Wrong branch** - Move commits you accidentally made on the wrong branch
+- **Duplicate commits** - Apply the same fix across multiple branches
+
+## Your Task
+
+### The Scenario
+
+You're working on a project where:
+- The `main` branch is stable and in production
+- The `development` branch has new features being tested
+- Development has critical bug fixes that need to go to production NOW
+- But development also has experimental features that aren't ready yet
+
+You need to cherry-pick ONLY the bug fixes to main, leaving the experimental features behind.
+
+### Part 1: Explore the Development Branch
+
+First, see what commits are on the development branch:
+
+```pwsh
+cd challenge
+
+# View all commits on development branch
+git log --oneline development
+
+# View the full commit graph
+git log --oneline --graph --all
+```
+
+**Study the commits:**
+- Look for commits with "Fix" in the message (these are bug fixes)
+- Look for commits with "experimental" or "beta" (these should stay on development)
+- Note the commit hashes (the 7-character codes like `abc1234`)
+
+**Inspect specific commits:**
+```pwsh
+# See what files a commit changed
+git show <commit-hash>
+
+# Example:
+# git show abc1234
+```
+
+You should see:
+- 2 commits that fix bugs (security and performance)
+- 2 commits that add experimental features
+
+### Part 2: Switch to Main Branch
+
+Before cherry-picking, you need to be on the target branch (main):
+
+```pwsh
+# Switch to main branch
+git switch main
+
+# Verify you're on main
+git branch
+```
+
+The `*` should be next to `main`.
+
+**Check what's currently on main:**
+```pwsh
+# See main's commits
+git log --oneline
+
+# See what files exist
+ls
+```
+
+Main should only have the initial app and README - no bug fixes yet, no experimental features.
+
+### Part 3: Cherry-Pick the Bug Fixes
+
+Now copy the bug fix commits from development to main:
+
+1. Find the security fix commit hash by looking at your earlier `git log --oneline --graph --all`
+   - Look for a commit message like "Fix security vulnerability in input validation"
+   - Note its hash (first 7 characters)
+
+2. Cherry-pick the security fix:
+   ```pwsh
+   git cherry-pick <security-fix-hash>
+   
+   # Example if the hash is abc1234:
+   # git cherry-pick abc1234
+   ```
+3. Verify it worked: Check that security.py, with `ls` or check your file explorer in VSCode, now exists and check that the commit has been added to the main branch with `git log --oneline --graph --all`
+4. Find the performance fix commit hash
+   - Look for "Fix performance issue with data caching"
+   - Note its hash
+
+5. Cherry-pick the performance fix:
+   ```pwsh
+   git cherry-pick <performance-fix-hash>
+   ```
+
+6. Verify both fixes are now on main:
+   ```pwsh
+   # You should see both security.py and cache.py
+   ls
+   
+   # View the graph showing both branches
+   git log --oneline --graph --all
+   ```
+
+### Part 4: Verify Your Solution
+
+Check that you completed the challenge correctly:
+
+```pwsh
+# From inside the module directory
+.\verify.ps1
+```
+
+The verification checks:
+- ✅ You're on the main branch
+- ✅ Security fix is applied to main
+- ✅ Performance fix is applied to main
+- ✅ Experimental features are NOT on main
+- ✅ Development branch still has all commits
+
+## Understanding Cherry-Pick
+
+### What Actually Happens?
+
+When you cherry-pick a commit, Git:
+1. Looks at what changed in that specific commit
+2. Applies those same changes to your current branch
+3. Creates a NEW commit with those changes
+
+```
+Before cherry-pick:
+
+development:  A---B---C---D
+             /
+main:       E---F
+
+After: git switch main && git cherry-pick C
+
+development:  A---B---C---D
+             /
+main:       E---F---C'
+```
+
+Notice:
+- `C'` is a NEW commit (different hash than original `C`)
+- Original `C` still exists on development
+- Main now has the changes from C, but not B or D
+
+### Cherry-Pick vs Merge
+
+**Merge brings everything:**
+```pwsh
+git switch main
+git merge development
+# Result: A, B, C, and D all come to main
+```
+
+**Cherry-pick is selective:**
+```pwsh
+git switch main
+git cherry-pick C
+# Result: Only C comes to main (as C')
+```
+
+### Important: New Commits, New Hashes
+
+Cherry-picked commits are COPIES, not moves:
+- Original commit stays on source branch
+- New commit created on target branch
+- Different commit hash (because different parent)
+- Same changes, same message, different identity
+
+## Key Commands
+
+### Viewing Commits
+
+```pwsh
+# See commits on another branch
+git log branch-name --oneline
+
+# See what a specific commit changed
+git show <commit-hash>
+
+# See commit graph
+git log --oneline --graph --all
+
+# See only commit message (not changes)
+git log --oneline
+```
+
+### Cherry-Picking
+
+```pwsh
+# Cherry-pick a single commit
+git cherry-pick <commit-hash>
+
+# Cherry-pick multiple commits (in order)
+git cherry-pick <hash1> <hash2> <hash3>
+
+# Cherry-pick a range of commits
+git cherry-pick <start-hash>..<end-hash>
+
+# Abort a cherry-pick if something goes wrong
+git cherry-pick --abort
+```
+
+### After Cherry-Pick
+
+```pwsh
+# Verify the commit was added
+git log --oneline
+
+# See what files changed
+git show HEAD
+
+# Compare branches
+git log main..development --oneline
+```
+
+## Common Workflows
+
+### Hotfix to Production
+
+Critical bug found in production:
+
+```pwsh
+# You're on feature-new-ui branch
+# You just committed a critical security fix
+
+git log --oneline
+# Note the hash of your fix commit
+
+# Switch to production branch
+git switch production
+
+# Apply just that fix
+git cherry-pick <fix-commit-hash>
+
+# Deploy to production
+# Your fix is live, but new UI stays in development
+```
+
+### Backporting to Old Versions
+
+```pwsh
+# You fixed a bug on main
+git switch main
+git log --oneline
+# Note the fix commit hash
+
+# Apply to older release branch
+git switch release-2.5
+git cherry-pick <fix-commit-hash>
+
+# Apply to even older release
+git switch release-2.0
+git cherry-pick <fix-commit-hash>
+
+# Same fix now on three branches!
+```
+
+## Troubleshooting
+
+### "I can't remember the commit hash!"
+
+```pwsh
+# See commits on the source branch
+git log development --oneline
+
+# Search for specific text in commit messages
+git log development --oneline --grep="security"
+
+# See recent commits with more detail
+git log development --oneline -n 10
+```
+
+### "I cherry-picked in the wrong order!"
+
+Order matters! If commit B depends on commit A, cherry-pick A first:
+
+```pwsh
+# Wrong order might cause issues
+git cherry-pick B  # Might fail if it needs changes from A
+
+# Correct order
+git cherry-pick A
+git cherry-pick B
+```
+
+### "How do I see what will change before cherry-picking?"
+
+```pwsh
+# See what changes are in a commit
+git show <commit-hash>
+
+# Compare your current branch with a commit
+git diff HEAD <commit-hash>
+```
+
+## Tips for Success
+
+💡 **Copy the commit hashes** - Write them down before switching branches  
+💡 **Cherry-pick oldest first** - Apply commits in chronological order  
+💡 **Check your branch** - Always verify you're on the target branch first with `git branch`  
+💡 **Verify after each pick** - Run `git log --oneline` to confirm it worked  
+💡 **Use the graph** - `git log --oneline --graph --all` shows the full picture  
+💡 **Original stays put** - Cherry-pick copies, doesn't move commits  
+
+## What You've Learned
+
+After completing this module, you understand:
+
+- ✅ Cherry-pick copies specific commits between branches
+- ✅ `git cherry-pick <hash>` applies a commit to current branch
+- ✅ Cherry-picked commits get new hashes but same changes
+- ✅ Use cherry-pick for selective deployment of changes
+- ✅ Cherry-pick is different from merge (selective vs all)
+- ✅ Original commit stays on source branch
+
+## Next Steps
+
+Ready to continue? Cherry-pick is a powerful tool for selective change management. Next modules will cover more advanced Git operations.
+
+To start over:
+```pwsh
+.\reset.ps1
+```
+
+**Need help?** Run `git status` to see what Git suggests, or `git log --oneline --graph --all` to see the full picture!

01-essentials/05-cherry-pick/setup.ps1

@@ -26,7 +26,8 @@ git init | Out-Null
 git config user.name "Workshop User" | Out-Null
 git config user.email "user@workshop.local" | Out-Null
 
-# Create initial commits on main branch
+# Detect the default branch name (could be main, master, etc.)
+# First commit creates the branch, so we detect it after the first commit below
 $app = @"
 class App:
     def __init__(self):
@@ -40,6 +41,14 @@ Set-Content -Path "app.py" -Value $app
 git add app.py
 git commit -m "Initial app implementation" | Out-Null
 
+# Detect the main branch name after first commit
+$mainBranch = git branch --show-current
+if (-not $mainBranch) {
+    $mainBranch = git config --get init.defaultBranch
+    if (-not $mainBranch) { $mainBranch = "main" }
+}
+Write-Host "Default branch detected: $mainBranch" -ForegroundColor Yellow
+
 $readme = @"
 # Application
 
@@ -119,40 +128,29 @@ git add app.py
 git commit -m "Add beta features framework" | Out-Null
 
 # Commit 4: Performance bug fix (SHOULD be cherry-picked)
-$appWithPerformance = @"
-class App:
+# This commit adds caching to the existing file to fix performance
+# It should apply cleanly to main since it doesn't depend on experimental features
+$performanceCode = @"
+
+class DataCache:
     def __init__(self):
-        self.version = '1.0.0'
-        self.experimental_mode = False
-        self.beta_features = []
         self.cache = {}
 
-    def start(self):
-        print('App started')
-        if self.experimental_mode:
-            self.enable_experimental_features()
-
-    def enable_experimental_features(self):
-        print('Experimental features enabled')
-
-    def add_beta_feature(self, feature):
-        self.beta_features.append(feature)
-
-    def get_data(self, key):
+    def get(self, key):
         # Use cache to improve performance
         if key in self.cache:
             return self.cache[key]
-        data = self.fetch_data(key)
-        self.cache[key] = data
-        return data
+        return None
 
-    def fetch_data(self, key):
-        # Simulate data fetching
-        return {'key': key, 'value': 'data'}
+    def set(self, key, value):
+        self.cache[key] = value
+
+    def clear(self):
+        self.cache.clear()
 "@
 
-Set-Content -Path "app.py" -Value $appWithPerformance
-git add app.py
+Set-Content -Path "cache.py" -Value $performanceCode
+git add cache.py
 git commit -m "Fix performance issue with data caching" | Out-Null
 
 # Return to module directory
@@ -164,12 +162,13 @@ Write-Host "========================================" -ForegroundColor Green
 Write-Host "`nYou are on the 'development' branch with multiple commits:" -ForegroundColor Cyan
 Write-Host "- Experimental features (not ready for production)" -ForegroundColor Yellow
 Write-Host "- Critical bug fixes (needed in production NOW)" -ForegroundColor Green
+Write-Host "`nDetected main branch: $mainBranch" -ForegroundColor Cyan
 Write-Host "`nYour task:" -ForegroundColor Yellow
 Write-Host "1. Navigate to the challenge directory: cd challenge" -ForegroundColor White
 Write-Host "2. View the development branch commits: git log --oneline" -ForegroundColor White
 Write-Host "3. Identify which commits are bug fixes (look for 'Fix' in messages)" -ForegroundColor White
-Write-Host "4. Switch to main branch: git checkout main" -ForegroundColor White
-Write-Host "5. Cherry-pick ONLY the bug fix commits to main" -ForegroundColor White
-Write-Host "6. Do NOT bring the experimental features to main" -ForegroundColor White
+Write-Host "4. Switch to $mainBranch branch: git checkout $mainBranch" -ForegroundColor White
+Write-Host "5. Cherry-pick ONLY the bug fix commits to $mainBranch" -ForegroundColor White
+Write-Host "6. Do NOT bring the experimental features to $mainBranch" -ForegroundColor White
 Write-Host "`nHint: Look for commits mentioning 'security' and 'performance' fixes" -ForegroundColor Cyan
 Write-Host "Run '../verify.ps1' from the challenge directory to check your solution.`n" -ForegroundColor Cyan

01-essentials/05-cherry-pick/verify.ps1

@@ -32,12 +32,27 @@ if (-not (Test-Path ".git")) {
     exit 1
 }
 
+# Detect the main branch name
+$allBranches = git branch --list 2>$null | ForEach-Object { $_.Trim('* ') }
+if ($allBranches -contains "main") {
+    $mainBranch = "main"
+} elseif ($allBranches -contains "master") {
+    $mainBranch = "master"
+} else {
+    $mainBranch = git config --get init.defaultBranch
+    if (-not $mainBranch) {
+        $mainBranch = $allBranches | Select-Object -First 1
+        if (-not $mainBranch) { $mainBranch = "main" }
+    }
+}
+Write-Host "Detected main branch: $mainBranch" -ForegroundColor Cyan
+
 # Check current branch
 $currentBranch = git branch --show-current 2>$null
-if ($currentBranch -ne "main") {
-    Write-Host "[FAIL] You should be on the 'main' branch." -ForegroundColor Red
+if ($currentBranch -ne $mainBranch) {
+    Write-Host "[FAIL] You should be on the '$mainBranch' branch." -ForegroundColor Red
     Write-Host "Current branch: $currentBranch" -ForegroundColor Yellow
-    Write-Host "Hint: Use 'git checkout main' to switch to main branch" -ForegroundColor Yellow
+    Write-Host "Hint: Use 'git checkout $mainBranch' to switch to $mainBranch branch" -ForegroundColor Yellow
     Set-Location ..
     exit 1
 }
@@ -54,15 +69,15 @@ if (Test-Path ".git/CHERRY_PICK_HEAD") {
 }
 
 # Check commit count on main (should be 4: 2 initial + 2 cherry-picked)
-$mainCommitCount = (git rev-list --count main 2>$null)
+$mainCommitCount = (git rev-list --count $mainBranch 2>$null)
 if ($mainCommitCount -ne 4) {
-    Write-Host "[FAIL] Expected 4 commits on main branch, found $mainCommitCount" -ForegroundColor Red
+    Write-Host "[FAIL] Expected 4 commits on $mainBranch branch, found $mainCommitCount" -ForegroundColor Red
     if ($mainCommitCount -lt 4) {
-        Write-Host "Hint: You should cherry-pick 2 bug fix commits to main" -ForegroundColor Yellow
+        Write-Host "Hint: You should cherry-pick 2 bug fix commits to $mainBranch" -ForegroundColor Yellow
     } else {
         Write-Host "Hint: You should cherry-pick ONLY the 2 bug fix commits, not all commits" -ForegroundColor Yellow
     }
-    Write-Host "`nExpected commits on main:" -ForegroundColor Yellow
+    Write-Host "`nExpected commits on ${mainBranch}:" -ForegroundColor Yellow
     Write-Host "  1. Initial app implementation" -ForegroundColor White
     Write-Host "  2. Add README" -ForegroundColor White
     Write-Host "  3. Fix security vulnerability in input validation (cherry-picked)" -ForegroundColor White
@@ -72,9 +87,9 @@ if ($mainCommitCount -ne 4) {
 }
 
 # Check for merge commits (should be none - cherry-pick doesn't create merge commits)
-$mergeCommits = git log --merges --oneline main 2>$null
+$mergeCommits = git log --merges --oneline $mainBranch 2>$null
 if ($mergeCommits) {
-    Write-Host "[FAIL] Found merge commits on main. You should use cherry-pick, not merge." -ForegroundColor Red
+    Write-Host "[FAIL] Found merge commits on $mainBranch. You should use cherry-pick, not merge." -ForegroundColor Red
     Write-Host "Hint: Use 'git cherry-pick <commit-hash>' instead of 'git merge'" -ForegroundColor Yellow
     Set-Location ..
     exit 1
@@ -82,7 +97,7 @@ if ($mergeCommits) {
 
 # Check that security.py exists (from the security fix commit)
 if (-not (Test-Path "security.py")) {
-    Write-Host "[FAIL] security.py not found on main branch." -ForegroundColor Red
+    Write-Host "[FAIL] security.py not found on $mainBranch branch." -ForegroundColor Red
     Write-Host "Hint: You need to cherry-pick the 'Fix security vulnerability' commit" -ForegroundColor Yellow
     Set-Location ..
     exit 1
@@ -110,23 +125,32 @@ if (-not (Test-Path "app.py")) {
     exit 1
 }
 
-# Check that app.py has the performance fix (cache) but NOT experimental features
-$appContent = Get-Content "app.py" -Raw
-
-# Should have cache (from performance fix)
-if ($appContent -notmatch "cache") {
-    Write-Host "[FAIL] app.py is missing the performance fix (cache)." -ForegroundColor Red
+# Check that cache.py exists (from performance fix)
+if (-not (Test-Path "cache.py")) {
+    Write-Host "[FAIL] cache.py not found on $mainBranch branch." -ForegroundColor Red
     Write-Host "Hint: You need to cherry-pick the 'Fix performance issue' commit" -ForegroundColor Yellow
     Set-Location ..
     exit 1
 }
 
-if ($appContent -notmatch "get_data") {
-    Write-Host "[FAIL] app.py is missing the get_data method from performance fix." -ForegroundColor Red
+# Check that cache.py has the DataCache class
+$cacheContent = Get-Content "cache.py" -Raw
+
+if ($cacheContent -notmatch "DataCache") {
+    Write-Host "[FAIL] cache.py is missing the DataCache class." -ForegroundColor Red
     Set-Location ..
     exit 1
 }
 
+if ($cacheContent -notmatch "def get\(") {
+    Write-Host "[FAIL] cache.py is missing the get method." -ForegroundColor Red
+    Set-Location ..
+    exit 1
+}
+
+# Check that app.py does NOT have experimental features
+$appContent = Get-Content "app.py" -Raw
+
 # Should NOT have experimental features
 if ($appContent -match "experimental_mode") {
     Write-Host "[FAIL] app.py contains experimental features (experimental_mode)." -ForegroundColor Red
@@ -151,7 +175,7 @@ if ($appContent -match "enable_experimental_features") {
 }
 
 # Check commit messages to verify cherry-picks
-$commits = git log --pretty=format:"%s" main 2>$null
+$commits = git log --pretty=format:"%s" $mainBranch 2>$null
 $commitArray = $commits -split "`n"
 
 $hasSecurityFix = $false
@@ -167,14 +191,14 @@ foreach ($commit in $commitArray) {
 }
 
 if (-not $hasSecurityFix) {
-    Write-Host "[FAIL] Security fix commit not found on main branch." -ForegroundColor Red
+    Write-Host "[FAIL] Security fix commit not found on $mainBranch branch." -ForegroundColor Red
     Write-Host "Hint: Cherry-pick the 'Fix security vulnerability' commit from development" -ForegroundColor Yellow
     Set-Location ..
     exit 1
 }
 
 if (-not $hasPerformanceFix) {
-    Write-Host "[FAIL] Performance fix commit not found on main branch." -ForegroundColor Red
+    Write-Host "[FAIL] Performance fix commit not found on $mainBranch branch." -ForegroundColor Red
     Write-Host "Hint: Cherry-pick the 'Fix performance issue' commit from development" -ForegroundColor Yellow
     Set-Location ..
     exit 1
@@ -194,8 +218,8 @@ Write-Host "`n========================================" -ForegroundColor Green
 Write-Host "SUCCESS! Challenge completed!" -ForegroundColor Green
 Write-Host "========================================" -ForegroundColor Green
 Write-Host "`nYou have successfully:" -ForegroundColor Cyan
-Write-Host "- Cherry-picked the security vulnerability fix to main" -ForegroundColor White
-Write-Host "- Cherry-picked the performance issue fix to main" -ForegroundColor White
+Write-Host "- Cherry-picked the security vulnerability fix to $mainBranch" -ForegroundColor White
+Write-Host "- Cherry-picked the performance issue fix to $mainBranch" -ForegroundColor White
 Write-Host "- Left experimental features on development branch only" -ForegroundColor White
 Write-Host "- Kept development branch intact with all commits" -ForegroundColor White
 Write-Host "`nPerfect use of cherry-pick!" -ForegroundColor Green

01-essentials/05-revert/README.md

@@ -1,638 +0,0 @@
-# Module 05: Git Revert - Safe Undoing
-
-## About This Module
-
-Welcome to Module 05, where you'll learn the **safe, team-friendly way to undo changes** in Git. Unlike destructive commands that erase history, `git revert` creates new commits that undo previous changes while preserving the complete project history.
-
-**Why revert is important:**
-- ✅ Safe for shared/pushed commits
-- ✅ Preserves complete history and audit trail
-- ✅ Transparent to your team
-- ✅ Can be undone itself if needed
-- ✅ Works with any commit in history
-
-**Key principle:** Revert doesn't erase mistakes—it documents how you fixed them.
-
-## Learning Objectives
-
-By completing this module, you will:
-
-1. Revert regular commits safely while preserving surrounding changes
-2. Revert merge commits using the `-m` flag
-3. Understand merge commit parent numbering
-4. Handle the re-merge problem that occurs after reverting merges
-5. Revert multiple commits at once
-6. Know when to use revert vs. other undo strategies
-
-## Prerequisites
-
-Before starting this module, you should be comfortable with:
-- Creating commits (`git commit`)
-- Viewing commit history (`git log`)
-- Understanding branches and merging (Module 03)
-
-## Setup
-
-Run the setup script to create the challenge environment:
-
-```powershell
-./setup.ps1
-```
-
-This creates a `challenge/` directory with three branches demonstrating different revert scenarios:
-- `regular-revert` - Basic commit reversion
-- `merge-revert` - Merge commit reversion
-- `multi-revert` - Multiple commit reversion
-
-## Challenge 1: Reverting a Regular Commit
-
-### Scenario
-
-You're working on a calculator application. A developer added a `divide` function that crashes when dividing by zero. The bug was discovered after subsequent commits were made, so you can't just delete it—you need to revert it while keeping the commits that came after.
-
-### Your Task
-
-1. Navigate to the challenge directory:
-   ```bash
-   cd challenge
-   ```
-
-2. You should be on the `regular-revert` branch. View the commit history:
-   ```bash
-   git log --oneline
-   ```
-
-3. Find the commit with the broken divide function (message: "Add broken divide function - needs to be reverted!")
-
-4. Revert that specific commit:
-   ```bash
-   git revert <commit-hash>
-   ```
-
-5. Git will open your editor for the revert commit message. The default message is fine—save and close.
-
-### What to Observe
-
-After reverting, check:
-
-```bash
-# View the new revert commit
-git log --oneline
-
-# Check that divide function is gone
-cat calculator.py | grep "def divide"  # Should return nothing
-
-# Check that modulo function still exists (it came after the bad commit)
-cat calculator.py | grep "def modulo"  # Should find it
-
-# Check that multiply function still exists (it came before the bad commit)
-cat calculator.py | grep "def multiply"  # Should find it
-```
-
-**Key insight:** Revert creates a new commit that undoes the changes from the target commit, but leaves all other commits intact.
-
-### Understanding the Timeline
-
-```
-Before revert:
-main.py (initial) → multiply (good) → divide (BAD) → modulo (good)
-                                        ↑
-                                    We want to undo THIS
-
-After revert:
-main.py (initial) → multiply (good) → divide (BAD) → modulo (good) → revert divide (new commit)
-                                                                        ↑
-                                                                    Removes divide, keeps modulo
-```
-
-The revert commit adds a new point in history that undoes the divide changes.
-
-## Challenge 2: Reverting a Merge Commit
-
-### Scenario
-
-Your team merged a `feature-auth` branch that added authentication functionality. After deployment, you discovered the authentication system has critical security issues. You need to revert the entire merge while the security team redesigns the feature.
-
-**This is different from reverting a regular commit!** Merge commits have **two parents**, so you must tell Git which parent to keep.
-
-### Understanding Merge Commit Parents
-
-When you merge a feature branch into main:
-
-```
-    feature-auth (parent 2)
-         ↓
-    C---D
-   /     \
-A---B-----M  ← Merge commit (has TWO parents)
-    ↑
-parent 1 (main)
-```
-
-The merge commit `M` has:
-- **Parent 1**: The branch you merged INTO (main)
-- **Parent 2**: The branch you merged FROM (feature-auth)
-
-When reverting a merge, you must specify which parent to keep using the `-m` flag:
-- `-m 1` means "keep parent 1" (main) - **Most common**
-- `-m 2` means "keep parent 2" (feature-auth) - Rare
-
-**In practice:** You almost always use `-m 1` to keep the main branch and undo the feature branch changes.
-
-### Your Task
-
-1. Switch to the merge-revert branch:
-   ```bash
-   git switch merge-revert
-   ```
-
-2. View the commit history and find the merge commit:
-   ```bash
-   git log --oneline --graph
-   ```
-
-   Look for: "Merge feature-auth branch"
-
-3. Revert the merge commit using `-m 1`:
-   ```bash
-   git revert -m 1 <merge-commit-hash>
-   ```
-
-   **Explanation:**
-   - `-m 1` tells Git to keep parent 1 (main branch)
-   - This undoes all changes from the feature-auth branch
-   - Creates a new "revert merge" commit
-
-4. Save the default commit message and check the result:
-   ```bash
-   # Verify auth.py is gone
-   ls auth.py  # Should not exist
-
-   # Verify calculator.py no longer imports auth
-   cat calculator.py | grep "from auth"  # Should return nothing
-   ```
-
-### What Happens Without -m?
-
-If you try to revert a merge commit without the `-m` flag:
-
-```bash
-git revert <merge-commit-hash>
-# Error: commit <hash> is a merge but no -m option was given
-```
-
-Git doesn't know which parent you want to keep, so it refuses to proceed.
-
-### The Re-Merge Problem
-
-**Important gotcha:** After reverting a merge, you **cannot simply re-merge** the same branch!
-
-Here's why:
-
-```
-Initial merge:
-A---B---M (merged feature-auth)
-        ↑
-    All changes from feature-auth are now in main
-
-After revert:
-A---B---M---R (reverted merge)
-            ↑
-        Changes removed, but Git remembers they were merged
-
-Attempting to re-merge:
-A---B---M---R---M2 (try to merge feature-auth again)
-                 ↑
-             Git thinks: "I already merged these commits,
-             nothing new to add!" (Empty merge)
-```
-
-**Solutions if you need to re-merge:**
-
-1. **Revert the revert** (recommended):
-   ```bash
-   git revert <revert-commit-hash>
-   ```
-   This brings back all the feature-auth changes.
-
-2. **Cherry-pick new commits** from the feature branch:
-   ```bash
-   git cherry-pick <new-commits>
-   ```
-
-3. **Merge with --no-ff** and resolve conflicts manually (advanced).
-
-### When to Revert Merges
-
-Revert merge commits when:
-- ✅ Feature causes production issues
-- ✅ Need to temporarily remove a feature
-- ✅ Discovered critical bugs after merging
-- ✅ Security issues require immediate rollback
-
-Don't revert merges when:
-- ❌ You just need to fix a small bug (fix it with a new commit instead)
-- ❌ You plan to re-merge the same branch soon (use reset if local, or revert-the-revert later)
-
-## Challenge 3: Reverting Multiple Commits
-
-### Scenario
-
-Two separate commits added broken mathematical functions (`square_root` and `logarithm`). Both have critical bugs and need to be removed. You can revert multiple commits at once.
-
-### Your Task
-
-1. Switch to the multi-revert branch:
-   ```bash
-   git switch multi-revert
-   ```
-
-2. View the commit history:
-   ```bash
-   git log --oneline
-   ```
-
-   Find the two commits:
-   - "Add broken square_root - REVERT THIS!"
-   - "Add broken logarithm - REVERT THIS TOO!"
-
-3. Revert both commits in one command:
-   ```bash
-   git revert <commit-hash-1> <commit-hash-2>
-   ```
-
-   **Important:** List commits from **oldest to newest** for cleanest history.
-
-   Alternatively, revert them one at a time:
-   ```bash
-   git revert <commit-hash-1>
-   git revert <commit-hash-2>
-   ```
-
-4. Git will prompt for a commit message for each revert. Accept the defaults.
-
-5. Verify the result:
-   ```bash
-   # Check that both bad functions are gone
-   cat calculator.py | grep "def square_root"  # Should return nothing
-   cat calculator.py | grep "def logarithm"    # Should return nothing
-
-   # Check that good functions remain
-   cat calculator.py | grep "def power"        # Should find it
-   cat calculator.py | grep "def absolute"     # Should find it
-   ```
-
-### Multi-Revert Strategies
-
-**Reverting a range of commits:**
-
-```bash
-# Revert commits from A to B (inclusive)
-git revert A^..B
-
-# Example: Revert last 3 commits
-git revert HEAD~3..HEAD
-```
-
-**Reverting without auto-commit:**
-
-```bash
-# Stage revert changes without committing
-git revert --no-commit <commit-hash>
-
-# Review changes
-git diff --staged
-
-# Commit when ready
-git commit
-```
-
-This is useful when reverting multiple commits and you want one combined revert commit.
-
-## Verification
-
-Verify your solutions by running the verification script:
-
-```bash
-cd ..  # Return to module directory
-./verify.ps1
-```
-
-The script checks that:
-- ✅ Revert commits were created (not destructive deletion)
-- ✅ Bad code is removed
-- ✅ Good code before and after is preserved
-- ✅ Merge commits still exist in history
-- ✅ Proper use of `-m` flag for merge reverts
-
-## Command Reference
-
-### Basic Revert
-
-```bash
-# Revert a specific commit
-git revert <commit-hash>
-
-# Revert the most recent commit
-git revert HEAD
-
-# Revert the second-to-last commit
-git revert HEAD~1
-```
-
-### Merge Commit Revert
-
-```bash
-# Revert a merge commit (keep parent 1)
-git revert -m 1 <merge-commit-hash>
-
-# Revert a merge commit (keep parent 2) - rare
-git revert -m 2 <merge-commit-hash>
-```
-
-### Multiple Commits
-
-```bash
-# Revert multiple specific commits
-git revert <hash1> <hash2> <hash3>
-
-# Revert a range of commits (oldest^..newest)
-git revert <oldest-hash>^..<newest-hash>
-
-# Revert last 3 commits
-git revert HEAD~3..HEAD
-```
-
-### Revert Options
-
-```bash
-# Revert but don't commit automatically
-git revert --no-commit <commit-hash>
-
-# Revert and edit the commit message
-git revert --edit <commit-hash>
-
-# Revert without opening editor (use default message)
-git revert --no-edit <commit-hash>
-
-# Abort a revert in progress (if conflicts)
-git revert --abort
-
-# Continue revert after resolving conflicts
-git revert --continue
-```
-
-## When to Use Git Revert
-
-Use `git revert` when:
-
-- ✅ **Commits are already pushed** - Safe for shared history
-- ✅ **Working in a team** - Transparent to everyone
-- ✅ **Need audit trail** - Shows what was undone and why
-- ✅ **Public repositories** - Can't rewrite public history
-- ✅ **Undoing old commits** - Can revert commits from weeks ago
-- ✅ **Production hotfixes** - Safe emergency rollback
-
-**Golden Rule:** If others might have your commits, use revert.
-
-## When NOT to Use Git Revert
-
-Consider alternatives when:
-
-- ❌ **Commits are still local** - Use `git reset` instead (Module 06)
-- ❌ **Just want to edit a commit** - Use `git commit --amend`
-- ❌ **Haven't pushed yet** - Reset is cleaner for local cleanup
-- ❌ **Need to combine commits** - Use interactive rebase
-- ❌ **Reverting creates complex conflicts** - Might need manual fix forward
-
-## Revert vs. Reset vs. Rebase
-
-| Command | History | Safety | Use Case |
-|---------|---------|--------|----------|
-| **revert** | Preserves | ✅ Safe | Undo pushed commits |
-| **reset** | Erases | ⚠️ Dangerous | Clean up local commits |
-| **rebase** | Rewrites | ⚠️ Dangerous | Polish commit history |
-
-**This module teaches revert.** You'll learn reset in Module 06.
-
-## Handling Revert Conflicts
-
-Sometimes reverting causes conflicts if subsequent changes touched the same code:
-
-```bash
-# Start revert
-git revert <commit-hash>
-
-# If conflicts occur:
-# Conflict in calculator.py
-# CONFLICT (content): Merge conflict in calculator.py
-```
-
-**To resolve:**
-
-1. Open conflicted files and fix conflicts (look for `<<<<<<<` markers)
-2. Stage resolved files:
-   ```bash
-   git add <resolved-files>
-   ```
-3. Continue the revert:
-   ```bash
-   git revert --continue
-   ```
-
-Or abort if you change your mind:
-```bash
-git revert --abort
-```
-
-## Common Mistakes
-
-### 1. Forgetting -m for Merge Commits
-
-```bash
-# ❌ Wrong - will fail
-git revert <merge-commit>
-
-# ✅ Correct
-git revert -m 1 <merge-commit>
-```
-
-### 2. Trying to Re-Merge After Revert
-
-```bash
-# After reverting a merge:
-git revert -m 1 <merge-commit>
-
-# ❌ This won't work as expected
-git merge feature-branch  # Empty merge!
-
-# ✅ Do this instead
-git revert <the-revert-commit>  # Revert the revert
-```
-
-### 3. Using Reset on Pushed Commits
-
-```bash
-# ❌ NEVER do this with pushed commits
-git reset --hard HEAD~3
-
-# ✅ Do this instead
-git revert HEAD~3..HEAD
-```
-
-### 4. Reverting Commits in Wrong Order
-
-When reverting multiple related commits, revert from newest to oldest:
-
-```bash
-# If you have: A → B → C (and C depends on B)
-
-# ✅ Correct order
-git revert C
-git revert B
-
-# ❌ Wrong order (may cause conflicts)
-git revert B  # Conflict! C still references B
-git revert C
-```
-
-## Best Practices
-
-1. **Write clear revert messages:**
-   ```bash
-   git revert <hash> -m "Revert authentication - security issue #1234"
-   ```
-
-2. **Link to issue tracking:**
-   ```
-   Revert "Add new payment system"
-
-   This reverts commit abc123.
-
-   Critical bug in payment processing.
-   See bug tracker: ISSUE-1234
-   ```
-
-3. **Test after reverting:**
-   - Run your test suite
-   - Verify the application still works
-   - Check no unintended changes occurred
-
-4. **Communicate with team:**
-   - Announce reverts in team chat
-   - Explain why the revert was necessary
-   - Provide timeline for re-introducing the feature
-
-5. **Keep reverts focused:**
-   - Revert the minimum necessary
-   - Don't bundle multiple unrelated reverts
-   - One problem = one revert commit
-
-## Troubleshooting
-
-### "Commit is a merge but no -m option was given"
-
-**Problem:** Trying to revert a merge commit without `-m`.
-
-**Solution:**
-```bash
-git revert -m 1 <merge-commit-hash>
-```
-
-### "Empty Revert / No Changes"
-
-**Problem:** Revert doesn't seem to do anything.
-
-**Possible causes:**
-- Commit was already reverted
-- Subsequent commits already undid the changes
-- Wrong commit hash
-
-**Solution:**
-```bash
-# Check what the commit actually changed
-git show <commit-hash>
-
-# Check if already reverted
-git log --grep="Revert"
-```
-
-### "Conflicts During Revert"
-
-**Problem:** Revert causes merge conflicts.
-
-**Why:** Subsequent commits modified the same code.
-
-**Solution:**
-1. Manually resolve conflicts in affected files
-2. `git add <resolved-files>`
-3. `git revert --continue`
-
-Or consider fixing forward with a new commit instead of reverting.
-
-### "Can't Re-Merge After Reverting Merge"
-
-**Problem:** After reverting a merge, re-merging the branch brings no changes.
-
-**Solution:** Revert the revert commit:
-```bash
-# Find the revert commit
-git log --oneline
-
-# Revert the revert (brings changes back)
-git revert <revert-commit-hash>
-```
-
-## Advanced: Revert Internals
-
-Understanding what revert does under the hood:
-
-```bash
-# Revert creates a new commit with inverse changes
-git revert <commit-hash>
-
-# This is equivalent to:
-git diff <commit-hash>^..<commit-hash> > changes.patch
-patch -R < changes.patch  # Apply in reverse
-git add .
-git commit -m "Revert '<original message>'"
-```
-
-**Key insight:** Revert computes the diff of the target commit, inverts it, and applies it as a new commit.
-
-## Going Further
-
-Now that you understand revert, you're ready for:
-
-- **Module 06: Git Reset** - Learn the dangerous but powerful local history rewriting
-- **Module 07: Git Stash** - Temporarily set aside uncommitted changes
-- **Module 08: Multiplayer Git** - Collaborate with advanced workflows
-
-## Summary
-
-You've learned:
-
-- ✅ `git revert` creates new commits that undo previous changes
-- ✅ Revert is safe for shared/pushed commits
-- ✅ Merge commits require `-m 1` or `-m 2` flag
-- ✅ Parent 1 = branch merged into, Parent 2 = branch merged from
-- ✅ Can't simply re-merge after reverting a merge
-- ✅ Multiple commits can be reverted in one command
-- ✅ Revert preserves complete history for audit trails
-
-**The Golden Rule of Revert:** Use revert for any commit that might be shared with others.
-
-## Next Steps
-
-1. Complete all three challenge scenarios
-2. Run `./verify.ps1` to check your solutions
-3. Experiment with reverting different commits
-4. Move on to Module 06: Git Reset (dangerous but powerful!)
-
----
-
-**Need Help?**
-- Review the command reference above
-- Check the troubleshooting section
-- Re-run `./setup.ps1` to start fresh
-- Practice reverting in different orders to understand the behavior

01-essentials/05-revert/reset.ps1

@@ -1,24 +0,0 @@
-#!/usr/bin/env pwsh
-<#
-.SYNOPSIS
-    Resets the Module 05 challenge environment to start fresh.
-
-.DESCRIPTION
-    This script removes the challenge directory and re-runs setup.ps1
-    to create a fresh challenge environment.
-#>
-
-Write-Host "`n=== Resetting Module 05: Git Revert Challenge ===" -ForegroundColor Cyan
-
-# Check if challenge directory exists
-if (Test-Path "challenge") {
-    Write-Host "Removing existing challenge directory..." -ForegroundColor Yellow
-    Remove-Item -Recurse -Force "challenge"
-    Write-Host "[OK] Challenge directory removed" -ForegroundColor Green
-} else {
-    Write-Host "[INFO] No existing challenge directory found" -ForegroundColor Yellow
-}
-
-# Run setup to create fresh environment
-Write-Host "`nRunning setup to create fresh challenge environment..." -ForegroundColor Cyan
-& "$PSScriptRoot/setup.ps1"

01-essentials/05-revert/setup.ps1

@@ -1,373 +0,0 @@
-#!/usr/bin/env pwsh
-<#
-.SYNOPSIS
-    Sets up the Module 05 challenge environment for learning git revert.
-
-.DESCRIPTION
-    This script creates a challenge directory with three branches demonstrating
-    different revert scenarios:
-    - regular-revert: Basic revert of a single bad commit
-    - merge-revert: Reverting a merge commit with -m flag
-    - multi-revert: Reverting multiple commits at once
-#>
-
-Write-Host "`n=== Setting up Module 05: Git Revert Challenge ===" -ForegroundColor Cyan
-
-# Remove existing challenge directory if it exists
-if (Test-Path "challenge") {
-    Write-Host "Removing existing challenge directory..." -ForegroundColor Yellow
-    Remove-Item -Recurse -Force "challenge"
-}
-
-# Create fresh challenge directory
-Write-Host "Creating challenge directory..." -ForegroundColor Green
-New-Item -ItemType Directory -Path "challenge" | Out-Null
-Set-Location "challenge"
-
-# Initialize Git repository
-Write-Host "Initializing Git repository..." -ForegroundColor Green
-git init | Out-Null
-
-# Configure git for this repository
-git config user.name "Workshop Student"
-git config user.email "student@example.com"
-
-# ============================================================================
-# SCENARIO 1: Regular Revert (Basic)
-# ============================================================================
-Write-Host "`nScenario 1: Creating regular-revert branch..." -ForegroundColor Cyan
-
-# Initial commit
-$calcContent = @"
-# calculator.py - Simple calculator
-
-def add(a, b):
-    """Add two numbers."""
-    return a + b
-
-def subtract(a, b):
-    """Subtract b from a."""
-    return a - b
-"@
-Set-Content -Path "calculator.py" -Value $calcContent
-git add .
-git commit -m "Initial calculator implementation" | Out-Null
-
-# Create regular-revert branch
-git switch -c regular-revert | Out-Null
-
-# Good commit: Add multiply
-$calcContent = @"
-# calculator.py - Simple calculator
-
-def add(a, b):
-    """Add two numbers."""
-    return a + b
-
-def subtract(a, b):
-    """Subtract b from a."""
-    return a - b
-
-def multiply(a, b):
-    """Multiply two numbers."""
-    return a * b
-"@
-Set-Content -Path "calculator.py" -Value $calcContent
-git add .
-git commit -m "Add multiply function" | Out-Null
-
-# BAD commit: Add broken divide function
-$calcContent = @"
-# calculator.py - Simple calculator
-
-def add(a, b):
-    """Add two numbers."""
-    return a + b
-
-def subtract(a, b):
-    """Subtract b from a."""
-    return a - b
-
-def multiply(a, b):
-    """Multiply two numbers."""
-    return a * b
-
-def divide(a, b):
-    """Divide a by b - BROKEN: doesn't handle division by zero!"""
-    return a / b  # This will crash if b is 0!
-"@
-Set-Content -Path "calculator.py" -Value $calcContent
-git add .
-git commit -m "Add broken divide function - needs to be reverted!" | Out-Null
-
-# Good commit: Add modulo (after bad commit)
-$calcContent = @"
-# calculator.py - Simple calculator
-
-def add(a, b):
-    """Add two numbers."""
-    return a + b
-
-def subtract(a, b):
-    """Subtract b from a."""
-    return a - b
-
-def multiply(a, b):
-    """Multiply two numbers."""
-    return a * b
-
-def divide(a, b):
-    """Divide a by b - BROKEN: doesn't handle division by zero!"""
-    return a / b  # This will crash if b is 0!
-
-def modulo(a, b):
-    """Return remainder of a divided by b."""
-    return a % b
-"@
-Set-Content -Path "calculator.py" -Value $calcContent
-git add .
-git commit -m "Add modulo function" | Out-Null
-
-Write-Host "[CREATED] regular-revert branch with bad divide commit" -ForegroundColor Green
-
-# ============================================================================
-# SCENARIO 2: Merge Revert (Merge Commit with -m flag)
-# ============================================================================
-Write-Host "`nScenario 2: Creating merge-revert scenario..." -ForegroundColor Cyan
-
-# Switch back to main
-git switch main | Out-Null
-
-# Create merge-revert branch
-git switch -c merge-revert | Out-Null
-
-# Create a feature branch to merge
-git switch -c feature-auth | Out-Null
-
-# Add auth functionality
-$authContent = @"
-# auth.py - Authentication module
-
-def login(username, password):
-    \"\"\"Login user.\"\"\"
-    print(f"Logging in {username}...")
-    return True
-
-def logout(username):
-    \"\"\"Logout user.\"\"\"
-    print(f"Logging out {username}...")
-    return True
-"@
-Set-Content -Path "auth.py" -Value $authContent
-git add .
-git commit -m "Add authentication module" | Out-Null
-
-# Add password validation
-$authContent = @"
-# auth.py - Authentication module
-
-def validate_password(password):
-    \"\"\"Validate password strength.\"\"\"
-    return len(password) >= 8
-
-def login(username, password):
-    \"\"\"Login user.\"\"\"
-    if not validate_password(password):
-        print("Password too weak!")
-        return False
-    print(f"Logging in {username}...")
-    return True
-
-def logout(username):
-    \"\"\"Logout user.\"\"\"
-    print(f"Logging out {username}...")
-    return True
-"@
-Set-Content -Path "auth.py" -Value $authContent
-git add .
-git commit -m "Add password validation" | Out-Null
-
-# Integrate auth into calculator (part of the feature branch)
-$calcContent = @"
-# calculator.py - Simple calculator
-from auth import login
-
-def add(a, b):
-    """Add two numbers."""
-    return a + b
-
-def subtract(a, b):
-    """Subtract b from a."""
-    return a - b
-
-def secure_divide(a, b, username):
-    """Secure divide - requires authentication."""
-    if login(username, "password123"):
-        return a / b
-    return None
-"@
-Set-Content -Path "calculator.py" -Value $calcContent
-git add .
-git commit -m "Integrate auth into calculator" | Out-Null
-
-# Switch back to merge-revert and merge feature-auth
-git switch merge-revert | Out-Null
-git merge feature-auth --no-ff -m "Merge feature-auth branch" | Out-Null
-
-Write-Host "[CREATED] merge-revert branch with merge commit to revert" -ForegroundColor Green
-
-# ============================================================================
-# SCENARIO 3: Multi Revert (Multiple Bad Commits)
-# ============================================================================
-Write-Host "`nScenario 3: Creating multi-revert branch..." -ForegroundColor Cyan
-
-# Switch back to main
-git switch main | Out-Null
-
-# Create multi-revert branch
-git switch -c multi-revert | Out-Null
-
-# Reset calculator to simple version
-$calcContent = @"
-# calculator.py - Simple calculator
-
-def add(a, b):
-    """Add two numbers."""
-    return a + b
-
-def subtract(a, b):
-    """Subtract b from a."""
-    return a - b
-"@
-Set-Content -Path "calculator.py" -Value $calcContent
-git add .
-git commit -m "Reset to basic calculator" | Out-Null
-
-# Good commit: Add power function
-$calcContent = @"
-# calculator.py - Simple calculator
-
-def add(a, b):
-    """Add two numbers."""
-    return a + b
-
-def subtract(a, b):
-    """Subtract b from a."""
-    return a - b
-
-def power(a, b):
-    """Raise a to the power of b."""
-    return a ** b
-"@
-Set-Content -Path "calculator.py" -Value $calcContent
-git add .
-git commit -m "Add power function" | Out-Null
-
-# BAD commit 1: Add broken square_root
-$calcContent = @"
-# calculator.py - Simple calculator
-
-def add(a, b):
-    """Add two numbers."""
-    return a + b
-
-def subtract(a, b):
-    """Subtract b from a."""
-    return a - b
-
-def power(a, b):
-    """Raise a to the power of b."""
-    return a ** b
-
-def square_root(a):
-    """BROKEN: Returns wrong result for negative numbers!"""
-    return a ** 0.5  # This returns NaN for negative numbers!
-"@
-Set-Content -Path "calculator.py" -Value $calcContent
-git add .
-git commit -m "Add broken square_root - REVERT THIS!" | Out-Null
-
-# BAD commit 2: Add broken logarithm
-$calcContent = @"
-# calculator.py - Simple calculator
-
-def add(a, b):
-    """Add two numbers."""
-    return a + b
-
-def subtract(a, b):
-    """Subtract b from a."""
-    return a - b
-
-def power(a, b):
-    """Raise a to the power of b."""
-    return a ** b
-
-def square_root(a):
-    """BROKEN: Returns wrong result for negative numbers!"""
-    return a ** 0.5  # This returns NaN for negative numbers!
-
-def logarithm(a):
-    """BROKEN: Doesn't handle zero or negative numbers!"""
-    import math
-    return math.log(a)  # This crashes for a <= 0!
-"@
-Set-Content -Path "calculator.py" -Value $calcContent
-git add .
-git commit -m "Add broken logarithm - REVERT THIS TOO!" | Out-Null
-
-# Good commit: Add absolute value (after bad commits)
-$calcContent = @"
-# calculator.py - Simple calculator
-
-def add(a, b):
-    """Add two numbers."""
-    return a + b
-
-def subtract(a, b):
-    """Subtract b from a."""
-    return a - b
-
-def power(a, b):
-    """Raise a to the power of b."""
-    return a ** b
-
-def square_root(a):
-    """BROKEN: Returns wrong result for negative numbers!"""
-    return a ** 0.5  # This returns NaN for negative numbers!
-
-def logarithm(a):
-    """BROKEN: Doesn't handle zero or negative numbers!"""
-    import math
-    return math.log(a)  # This crashes for a <= 0!
-
-def absolute(a):
-    """Return absolute value of a."""
-    return abs(a)
-"@
-Set-Content -Path "calculator.py" -Value $calcContent
-git add .
-git commit -m "Add absolute value function" | Out-Null
-
-Write-Host "[CREATED] multi-revert branch with two bad commits to revert" -ForegroundColor Green
-
-# ============================================================================
-# Return to regular-revert to start
-# ============================================================================
-git switch regular-revert | Out-Null
-
-# Return to module directory
-Set-Location ..
-
-Write-Host "`n=== Setup Complete! ===" -ForegroundColor Green
-Write-Host "`nThree revert scenarios have been created:" -ForegroundColor Cyan
-Write-Host "  1. regular-revert   - Revert a single bad commit (basic)" -ForegroundColor White
-Write-Host "  2. merge-revert     - Revert a merge commit with -m flag" -ForegroundColor White
-Write-Host "  3. multi-revert     - Revert multiple bad commits" -ForegroundColor White
-Write-Host "`nYou are currently on the 'regular-revert' branch." -ForegroundColor Cyan
-Write-Host "`nNext steps:" -ForegroundColor Cyan
-Write-Host "  1. cd challenge" -ForegroundColor White
-Write-Host "  2. Read the README.md for detailed instructions" -ForegroundColor White
-Write-Host "  3. Complete each revert challenge" -ForegroundColor White
-Write-Host "  4. Run '..\verify.ps1' to check your solutions" -ForegroundColor White
-Write-Host ""

01-essentials/06-reset/README.md

@@ -1,717 +0,0 @@
-# Module 06: Git Reset - Dangerous History Rewriting
-
-## ⚠️ CRITICAL SAFETY WARNING ⚠️
-
-**Git reset is DESTRUCTIVE and DANGEROUS when misused!**
-
-Before using `git reset`, always ask yourself:
-
-```
-Have I pushed these commits to a remote repository?
-├─ YES → ❌ DO NOT USE RESET!
-│         Use git revert instead (Module 05)
-│         Rewriting pushed history breaks collaboration!
-│
-└─ NO  → ✅ Proceed with reset (local cleanup only)
-          Choose your mode carefully:
-          --soft (safest), --mixed (moderate), --hard (DANGEROUS)
-```
-
-**The Golden Rule:** NEVER reset commits that have been pushed/shared.
-
-## About This Module
-
-Welcome to Module 06, where you'll learn the powerful but dangerous `git reset` command. Unlike `git revert` (Module 05) which safely creates new commits, **reset erases commits from history**.
-
-**Why reset exists:**
-- ✅ Clean up messy local commit history before pushing
-- ✅ Undo commits you haven't shared yet
-- ✅ Unstage files from the staging area
-- ✅ Recover from mistakes (with reflog)
-
-**Why reset is dangerous:**
-- ⚠️ Erases commits permanently (without reflog)
-- ⚠️ Breaks repositories if used on pushed commits
-- ⚠️ Can lose work if used incorrectly
-- ⚠️ Confuses teammates if they have your commits
-
-**Key principle:** Reset is for polishing LOCAL history before sharing.
-
-## Learning Objectives
-
-By completing this module, you will:
-
-1. Understand the three reset modes: --soft, --mixed, --hard
-2. Reset commits while keeping changes staged (--soft)
-3. Reset commits and unstage changes (--mixed)
-4. Reset commits and discard everything (--hard)
-5. Know when reset is appropriate (local only!)
-6. Understand when to use revert instead
-7. Use reflog to recover from mistakes
-
-## Prerequisites
-
-Before starting this module, you should:
-- Be comfortable with commits and staging (`git add`, `git commit`)
-- Understand `git revert` from Module 05
-- **Know the difference between local and pushed commits!**
-
-## Setup
-
-Run the setup script to create the challenge environment:
-
-```powershell
-./setup.ps1
-```
-
-This creates a `challenge/` directory with three branches demonstrating different reset modes:
-- `soft-reset` - Reset with --soft (keep changes staged)
-- `mixed-reset` - Reset with --mixed (unstage changes)
-- `hard-reset` - Reset with --hard (discard everything)
-
-**Remember:** These are all LOCAL commits that have NEVER been pushed!
-
-## Understanding Reset Modes
-
-Git reset has three modes that control what happens to your changes:
-
-| Mode | Commits | Staging Area | Working Directory |
-|------|---------|--------------|-------------------|
-| **--soft** | ✂️ Removed | ✅ Kept (staged) | ✅ Kept |
-| **--mixed** (default) | ✂️ Removed | ✂️ Cleared | ✅ Kept (unstaged) |
-| **--hard** | ✂️ Removed | ✂️ Cleared | ✂️ **LOST!** |
-
-**Visual explanation:**
-
-```
-Before reset (3 commits):
-A → B → C → HEAD
-
-After git reset --soft HEAD~1:
-A → B → HEAD
-              ↑
-        C's changes are staged
-
-After git reset --mixed HEAD~1 (or just git reset HEAD~1):
-A → B → HEAD
-              ↑
-        C's changes are unstaged (in working directory)
-
-After git reset --hard HEAD~1:
-A → B → HEAD
-              ↑
-        C's changes are GONE (discarded completely!)
-```
-
-## Challenge 1: Soft Reset (Safest)
-
-### Scenario
-
-You committed "feature C" but immediately realized the implementation is wrong. You want to undo the commit but keep the changes staged so you can edit and re-commit them properly.
-
-**Use case:** Fixing the last commit's message or contents.
-
-### Your Task
-
-1. Navigate to the challenge directory:
-   ```bash
-   cd challenge
-   ```
-
-2. You should be on the `soft-reset` branch. View the commits:
-   ```bash
-   git log --oneline
-   ```
-
-   You should see:
-   - "Add feature C - needs better implementation!"
-   - "Add feature B"
-   - "Add feature A"
-   - "Initial project setup"
-
-3. View the current state:
-   ```bash
-   git status
-   # Should be clean
-   ```
-
-4. Reset the last commit with --soft:
-   ```bash
-   git reset --soft HEAD~1
-   ```
-
-5. Check what happened:
-   ```bash
-   # Commit is gone
-   git log --oneline
-   # Should only show 3 commits now (feature C commit removed)
-
-   # Changes are still staged
-   git status
-   # Should show "Changes to be committed"
-
-   # View the staged changes
-   git diff --cached
-   # Should show feature C code ready to be re-committed
-   ```
-
-### What to Observe
-
-After `--soft` reset:
-- ✅ Commit removed from history
-- ✅ Changes remain in staging area
-- ✅ Working directory unchanged
-- ✅ Ready to edit and re-commit
-
-**When to use --soft:**
-- Fix the last commit message (though `commit --amend` is simpler)
-- Combine multiple commits into one
-- Re-do a commit with better changes
-
-## Challenge 2: Mixed Reset (Default, Moderate)
-
-### Scenario
-
-You committed two experimental features that aren't ready. You want to remove both commits and have the changes back in your working directory (unstaged) so you can review and selectively re-commit them.
-
-**Use case:** Undoing commits and starting over with more careful staging.
-
-### Your Task
-
-1. Switch to the mixed-reset branch:
-   ```bash
-   git switch mixed-reset
-   ```
-
-2. View the commits:
-   ```bash
-   git log --oneline
-   ```
-
-   You should see:
-   - "Add debug mode - REMOVE THIS TOO!"
-   - "Add experimental feature X - REMOVE THIS!"
-   - "Add logging system"
-   - "Add application lifecycle"
-
-3. Reset the last TWO commits (default is --mixed):
-   ```bash
-   git reset HEAD~2
-   # This is equivalent to: git reset --mixed HEAD~2
-   ```
-
-4. Check what happened:
-   ```bash
-   # Commits are gone
-   git log --oneline
-   # Should only show 2 commits (lifecycle + logging)
-
-   # NO staged changes
-   git diff --cached
-   # Should be empty
-
-   # Changes are in working directory (unstaged)
-   git status
-   # Should show "Changes not staged for commit"
-
-   # View the unstaged changes
-   git diff
-   # Should show experimental and debug code
-   ```
-
-### What to Observe
-
-After `--mixed` reset (the default):
-- ✅ Commits removed from history
-- ✅ Staging area cleared
-- ✅ Changes moved to working directory (unstaged)
-- ✅ Can selectively stage and re-commit parts
-
-**When to use --mixed (default):**
-- Undo commits and start over with clean staging
-- Split one large commit into multiple smaller ones
-- Review changes before re-committing
-- Most common reset mode for cleanup
-
-## Challenge 3: Hard Reset (MOST DANGEROUS!)
-
-### ⚠️ EXTREME CAUTION REQUIRED ⚠️
-
-**This will PERMANENTLY DELETE your work!**
-
-Only use `--hard` when you're absolutely sure you want to throw away changes.
-
-### Scenario
-
-You committed completely broken code that you want to discard entirely. There's no salvaging it—you just want it gone.
-
-**Use case:** Throwing away failed experiments or completely wrong code.
-
-### Your Task
-
-1. Switch to the hard-reset branch:
-   ```bash
-   git switch hard-reset
-   ```
-
-2. View the commits and the broken code:
-   ```bash
-   git log --oneline
-   # Shows "Add broken helper D - DISCARD COMPLETELY!"
-
-   cat utils.py
-   # Shows the broken helper_d function
-   ```
-
-3. Reset the last commit with --hard:
-   ```bash
-   git reset --hard HEAD~1
-   ```
-
-   **WARNING:** This will permanently discard all changes from that commit!
-
-4. Check what happened:
-   ```bash
-   # Commit is gone
-   git log --oneline
-   # Should only show 2 commits
-
-   # NO staged changes
-   git diff --cached
-   # Empty
-
-   # NO unstaged changes
-   git diff
-   # Empty
-
-   # Working directory clean
-   git status
-   # "nothing to commit, working tree clean"
-
-   # File doesn't have broken code
-   cat utils.py
-   # helper_d is completely gone
-   ```
-
-### What to Observe
-
-After `--hard` reset:
-- ✅ Commit removed from history
-- ✅ Staging area cleared
-- ✅ Working directory reset to match
-- ⚠️ All changes from that commit PERMANENTLY DELETED
-
-**When to use --hard:**
-- Discarding failed experiments completely
-- Throwing away work you don't want (CAREFUL!)
-- Cleaning up after mistakes (use reflog to recover if needed)
-- Resetting to a known good state
-
-**⚠️ WARNING:** Files in the discarded commit are NOT gone forever—they're still in reflog for about 90 days. See "Recovery with Reflog" section below.
-
-## Understanding HEAD~N Syntax
-
-When resetting, you specify where to reset to:
-
-```bash
-# Reset to the commit before HEAD
-git reset HEAD~1
-
-# Reset to 2 commits before HEAD
-git reset HEAD~2
-
-# Reset to 3 commits before HEAD
-git reset HEAD~3
-
-# Reset to a specific commit hash
-git reset abc123
-
-# Reset to a branch
-git reset main
-```
-
-**Visualization:**
-
-```
-HEAD~3   HEAD~2   HEAD~1   HEAD
-  ↓        ↓        ↓        ↓
-A → B → C → D → E
-                    ↑
-              Current commit
-```
-
-- `git reset HEAD~1` moves HEAD from E to D
-- `git reset HEAD~2` moves HEAD from E to C
-- `git reset abc123` moves HEAD to that specific commit
-
-## Verification
-
-Verify your solutions by running the verification script:
-
-```bash
-cd ..  # Return to module directory
-./verify.ps1
-```
-
-The script checks that:
-- ✅ Commits were reset (count decreased)
-- ✅ --soft: Changes remain staged
-- ✅ --mixed: Changes are unstaged
-- ✅ --hard: Everything is clean
-
-## Recovery with Reflog
-
-**Good news:** Even `--hard` reset doesn't immediately destroy commits!
-
-Git keeps a "reflog" (reference log) of where HEAD has been for about 90 days. You can use this to recover "lost" commits.
-
-### How to Recover from a Reset
-
-1. View the reflog:
-   ```bash
-   git reflog
-   ```
-
-   Output example:
-   ```
-   abc123 HEAD@{0}: reset: moving to HEAD~1
-   def456 HEAD@{1}: commit: Add broken helper D
-   ...
-   ```
-
-2. Find the commit you want to recover (def456 in this example)
-
-3. Reset back to it:
-   ```bash
-   git reset def456
-   # Or use the reflog reference:
-   git reset HEAD@{1}
-   ```
-
-4. Your "lost" commit is back!
-
-### Reflog Safety Net
-
-**Important:**
-- Reflog entries expire after ~90 days (configurable)
-- Reflog is LOCAL to your repository (not shared)
-- `git gc` can clean up old reflog entries
-- If you really lose a commit, check reflog first!
-
-**Pro tip:** Before doing dangerous operations, note your current commit hash:
-```bash
-git log --oneline | head -1
-# abc123 Current work
-```
-
-## When to Use Git Reset
-
-Use `git reset` when:
-
-- ✅ **Commits are LOCAL only** (never pushed)
-- ✅ **Cleaning up messy history** before sharing
-- ✅ **Undoing recent commits** you don't want
-- ✅ **Combining commits** into one clean commit
-- ✅ **Unstaging files** (mixed mode)
-- ✅ **Polishing commit history** before pull request
-
-**Golden Rule:** Only reset commits that are local to your machine!
-
-## When NOT to Use Git Reset
-
-DO NOT use `git reset` when:
-
-- ❌ **Commits are pushed/shared** with others
-- ❌ **Teammates have your commits** (breaks their repos)
-- ❌ **In public repositories** (use revert instead)
-- ❌ **Unsure if pushed** (check `git log origin/main`)
-- ❌ **On main/master branch** after push
-- ❌ **Need audit trail** of changes
-
-**Use git revert instead** (Module 05) for pushed commits!
-
-## Decision Tree: Reset vs Revert
-
-```
-Need to undo a commit?
-│
-├─ Have you pushed this commit?
-│  │
-│  ├─ YES → Use git revert (Module 05)
-│  │         Safe for shared history
-│  │         Preserves complete audit trail
-│  │
-│  └─ NO → Can use git reset (local only)
-│           │
-│           ├─ Want to keep changes?
-│           │  │
-│           │  ├─ Keep staged → git reset --soft
-│           │  └─ Keep unstaged → git reset --mixed
-│           │
-│           └─ Discard everything? → git reset --hard
-│                                     (CAREFUL!)
-```
-
-## Reset vs Revert vs Rebase
-
-| Command | History | Safety | Use Case |
-|---------|---------|--------|----------|
-| **reset** | Erases | ⚠️ Dangerous | Local cleanup before push |
-| **revert** | Preserves | ✅ Safe | Undo pushed commits |
-| **rebase** | Rewrites | ⚠️ Dangerous | Polish history before push |
-
-**This module teaches reset.** You learned revert in Module 05.
-
-## Command Reference
-
-### Basic Reset
-
-```bash
-# Reset last commit, keep changes staged
-git reset --soft HEAD~1
-
-# Reset last commit, unstage changes (default)
-git reset HEAD~1
-git reset --mixed HEAD~1  # Same as above
-
-# Reset last commit, discard everything (DANGEROUS!)
-git reset --hard HEAD~1
-
-# Reset multiple commits
-git reset --soft HEAD~3   # Last 3 commits
-
-# Reset to specific commit
-git reset --soft abc123
-```
-
-### Unstaging Files
-
-```bash
-# Unstage a specific file (common use of reset)
-git reset HEAD filename.txt
-
-# Unstage all files
-git reset HEAD .
-
-# This is the same as:
-git restore --staged filename.txt  # Modern syntax
-```
-
-### Reflog and Recovery
-
-```bash
-# View reflog
-git reflog
-
-# Recover from reset
-git reset --hard HEAD@{1}
-git reset --hard abc123
-```
-
-### Check Before Reset
-
-```bash
-# Check if commits are pushed
-git log origin/main..HEAD
-# If output is empty, commits are pushed (DO NOT RESET)
-# If output shows commits, they're local (safe to reset)
-
-# Another way to check
-git log --oneline --graph --all
-# Look for origin/main marker
-```
-
-## Common Mistakes
-
-### 1. Resetting Pushed Commits
-
-```bash
-# ❌ NEVER do this if you've pushed!
-git push
-# ... time passes ...
-git reset --hard HEAD~3  # BREAKS teammate repos!
-
-# ✅ Do this instead
-git revert HEAD~3..HEAD  # Safe for shared history
-```
-
-### 2. Using --hard Without Thinking
-
-```bash
-# ❌ Dangerous - loses work!
-git reset --hard HEAD~1
-
-# ✅ Better - keep changes to review
-git reset --mixed HEAD~1
-# Now you can review changes and decide
-```
-
-### 3. Resetting Without Checking If Pushed
-
-```bash
-# ❌ Risky - are these commits pushed?
-git reset HEAD~5
-
-# ✅ Check first
-git log origin/main..HEAD  # Local commits only
-git reset HEAD~5  # Now safe if output showed commits
-```
-
-### 4. Forgetting Reflog Exists
-
-```bash
-# ❌ Panic after accidental --hard reset
-# "I lost my work!"
-
-# ✅ Check reflog first!
-git reflog  # Find the "lost" commit
-git reset --hard HEAD@{1}  # Recover it
-```
-
-## Best Practices
-
-1. **Always check if commits are pushed before reset:**
-   ```bash
-   git log origin/main..HEAD
-   ```
-
-2. **Prefer --mixed over --hard:**
-   - You can always discard changes later
-   - Hard to recover if you use --hard by mistake
-
-3. **Commit often locally, reset before push:**
-   - Make many small local commits
-   - Reset/squash into clean commits before pushing
-
-4. **Use descriptive commit messages even for local commits:**
-   - Helps when reviewing before reset
-   - Useful when checking reflog
-
-5. **Know your escape hatch:**
-   ```bash
-   git reflog  # Your safety net!
-   ```
-
-6. **Communicate with team:**
-   - NEVER reset shared branches (main, develop, etc.)
-   - Only reset your personal feature branches
-   - Only before pushing!
-
-## Troubleshooting
-
-### "I accidentally reset with --hard and lost work!"
-
-**Solution:** Check reflog:
-```bash
-git reflog
-# Find the commit before your reset
-git reset --hard HEAD@{1}  # Or the commit hash
-```
-
-**Prevention:** Always use --mixed first, then discard if really needed.
-
-### "I reset but teammates still have my commits"
-
-**Problem:** You reset and pushed with --force after they pulled.
-
-**Impact:** Their repository is now broken/inconsistent.
-
-**Solution:** Communicate! They need to:
-```bash
-git fetch
-git reset --hard origin/main  # Or whatever branch
-```
-
-**Prevention:** NEVER reset pushed commits!
-
-### "Reset didn't do what I expected"
-
-**Issue:** Wrong mode or wrong HEAD~N count.
-
-**Solution:** Check current state:
-```bash
-git status
-git diff
-git diff --cached
-git log --oneline
-```
-
-Undo the reset:
-```bash
-git reflog
-git reset HEAD@{1}  # Go back to before your reset
-```
-
-### "Can't reset - 'fatal: ambiguous argument HEAD~1'"
-
-**Issue:** No commits to reset (probably first commit).
-
-**Solution:** You can't reset before the first commit. If you want to remove the first commit entirely:
-```bash
-rm -rf .git  # Nuclear option - deletes entire repo
-git init     # Start over
-```
-
-## Advanced: Reset Internals
-
-Understanding what reset does under the hood:
-
-```bash
-# Reset moves the branch pointer
-# Before:
-main → A → B → C (HEAD)
-
-# After git reset --soft HEAD~1:
-main → A → B (HEAD)
-              ↑
-         C still exists in reflog, just not in branch history
-
-# The commit object C is still in .git/objects
-# It's just unreachable from any branch
-```
-
-**Key insight:** Reset moves the HEAD and branch pointers backward. The commits still exist temporarily in reflog until garbage collection.
-
-## Going Further
-
-Now that you understand reset, you're ready for:
-
-- **Module 07: Git Stash** - Temporarily save uncommitted work
-- **Module 08: Multiplayer Git** - Collaborate with complex workflows
-- **Interactive Rebase** - Advanced history polishing (beyond this workshop)
-
-## Summary
-
-You've learned:
-
-- ✅ `git reset` rewrites history by moving HEAD backward
-- ✅ `--soft` keeps changes staged (safest)
-- ✅ `--mixed` (default) unstages changes
-- ✅ `--hard` discards everything (most dangerous)
-- ✅ NEVER reset pushed/shared commits
-- ✅ Use reflog to recover from mistakes
-- ✅ Check if commits are pushed before resetting
-- ✅ Use revert (Module 05) for shared commits
-
-**The Critical Rule:** Reset is for LOCAL commits ONLY. Once you push, use revert!
-
-## Next Steps
-
-1. Complete all three challenge scenarios
-2. Run `./verify.ps1` to check your solutions
-3. Practice checking if commits are pushed before reset
-4. Move on to Module 07: Git Stash
-
----
-
-**⚠️ FINAL REMINDER ⚠️**
-
-**Before any `git reset` command, ask yourself:**
-
-> "Have I pushed these commits?"
-
-If YES → Use `git revert` instead!
-
-If NO → Proceed carefully, choose the right mode.
-
-**When in doubt, use --mixed instead of --hard!**

01-essentials/06-reset/setup.ps1

@@ -1,348 +0,0 @@
-#!/usr/bin/env pwsh
-<#
-.SYNOPSIS
-    Sets up the Module 06 challenge environment for learning git reset.
-
-.DESCRIPTION
-    This script creates a challenge directory with three branches demonstrating
-    different reset scenarios:
-    - soft-reset: Reset with --soft (keeps changes staged)
-    - mixed-reset: Reset with --mixed (unstages changes)
-    - hard-reset: Reset with --hard (discards everything) + reflog recovery
-#>
-
-Write-Host "`n=== Setting up Module 06: Git Reset Challenge ===" -ForegroundColor Cyan
-Write-Host "⚠️  WARNING: Git reset is DANGEROUS - use with extreme caution! ⚠️" -ForegroundColor Red
-
-# Remove existing challenge directory if it exists
-if (Test-Path "challenge") {
-    Write-Host "Removing existing challenge directory..." -ForegroundColor Yellow
-    Remove-Item -Recurse -Force "challenge"
-}
-
-# Create fresh challenge directory
-Write-Host "Creating challenge directory..." -ForegroundColor Green
-New-Item -ItemType Directory -Path "challenge" | Out-Null
-Set-Location "challenge"
-
-# Initialize Git repository
-Write-Host "Initializing Git repository..." -ForegroundColor Green
-git init | Out-Null
-
-# Configure git for this repository
-git config user.name "Workshop Student"
-git config user.email "student@example.com"
-
-# ============================================================================
-# Create initial commit (shared by all scenarios)
-# ============================================================================
-$readmeContent = @"
-# Git Reset Practice
-
-This repository contains practice scenarios for learning git reset.
-"@
-Set-Content -Path "README.md" -Value $readmeContent
-git add .
-git commit -m "Initial commit" | Out-Null
-
-# ============================================================================
-# SCENARIO 1: Soft Reset (--soft)
-# ============================================================================
-Write-Host "`nScenario 1: Creating soft-reset branch..." -ForegroundColor Cyan
-
-# Create soft-reset branch from initial commit
-git switch -c soft-reset | Out-Null
-
-# Build up scenario 1 commits
-$projectContent = @"
-# project.py - Main project file
-
-def initialize():
-    """Initialize the project."""
-    print("Project initialized")
-
-def main():
-    initialize()
-    print("Running application...")
-"@
-Set-Content -Path "project.py" -Value $projectContent
-git add .
-git commit -m "Initial project setup" | Out-Null
-
-# Good commit: Add feature A
-$projectContent = @"
-# project.py - Main project file
-
-def initialize():
-    """Initialize the project."""
-    print("Project initialized")
-
-def feature_a():
-    """Feature A implementation."""
-    print("Feature A is working")
-
-def main():
-    initialize()
-    feature_a()
-    print("Running application...")
-"@
-Set-Content -Path "project.py" -Value $projectContent
-git add .
-git commit -m "Add feature A" | Out-Null
-
-# Good commit: Add feature B
-$projectContent = @"
-# project.py - Main project file
-
-def initialize():
-    """Initialize the project."""
-    print("Project initialized")
-
-def feature_a():
-    """Feature A implementation."""
-    print("Feature A is working")
-
-def feature_b():
-    """Feature B implementation."""
-    print("Feature B is working")
-
-def main():
-    initialize()
-    feature_a()
-    feature_b()
-    print("Running application...")
-"@
-Set-Content -Path "project.py" -Value $projectContent
-git add .
-git commit -m "Add feature B" | Out-Null
-
-# BAD commit: Add feature C (wrong implementation)
-$projectContent = @"
-# project.py - Main project file
-
-def initialize():
-    """Initialize the project."""
-    print("Project initialized")
-
-def feature_a():
-    """Feature A implementation."""
-    print("Feature A is working")
-
-def feature_b():
-    """Feature B implementation."""
-    print("Feature B is working")
-
-def feature_c():
-    """Feature C implementation - WRONG!"""
-    print("Feature C has bugs!")  # This needs to be re-implemented
-
-def main():
-    initialize()
-    feature_a()
-    feature_b()
-    feature_c()
-    print("Running application...")
-"@
-Set-Content -Path "project.py" -Value $projectContent
-git add .
-git commit -m "Add feature C - needs better implementation!" | Out-Null
-
-Write-Host "[CREATED] soft-reset branch with commit to reset --soft" -ForegroundColor Green
-
-# ============================================================================
-# SCENARIO 2: Mixed Reset (--mixed, default)
-# ============================================================================
-Write-Host "`nScenario 2: Creating mixed-reset branch..." -ForegroundColor Cyan
-
-# Switch back to initial commit and create mixed-reset branch
-git switch main | Out-Null
-git switch -c mixed-reset | Out-Null
-
-# Build up scenario 2 commits
-$appContent = @"
-# app.py - Application entry point
-
-def start():
-    """Start the application."""
-    print("Application started")
-
-def stop():
-    """Stop the application."""
-    print("Application stopped")
-"@
-Set-Content -Path "app.py" -Value $appContent
-git add .
-git commit -m "Add application lifecycle" | Out-Null
-
-# Good commit: Add logging
-$appContent = @"
-# app.py - Application entry point
-
-def log(message):
-    """Log a message."""
-    print(f"[LOG] {message}")
-
-def start():
-    """Start the application."""
-    log("Application started")
-
-def stop():
-    """Stop the application."""
-    log("Application stopped")
-"@
-Set-Content -Path "app.py" -Value $appContent
-git add .
-git commit -m "Add logging system" | Out-Null
-
-# BAD commit 1: Add experimental feature X
-$appContent = @"
-# app.py - Application entry point
-
-def log(message):
-    """Log a message."""
-    print(f"[LOG] {message}")
-
-def experimental_feature_x():
-    """Experimental feature - NOT READY!"""
-    log("Feature X is experimental and buggy")
-
-def start():
-    """Start the application."""
-    log("Application started")
-    experimental_feature_x()
-
-def stop():
-    """Stop the application."""
-    log("Application stopped")
-"@
-Set-Content -Path "app.py" -Value $appContent
-git add .
-git commit -m "Add experimental feature X - REMOVE THIS!" | Out-Null
-
-# BAD commit 2: Add debug mode (also not ready)
-$appContent = @"
-# app.py - Application entry point
-
-DEBUG_MODE = True  # Should not be committed!
-
-def log(message):
-    """Log a message."""
-    print(f"[LOG] {message}")
-
-def experimental_feature_x():
-    """Experimental feature - NOT READY!"""
-    log("Feature X is experimental and buggy")
-
-def start():
-    """Start the application."""
-    if DEBUG_MODE:
-        log("DEBUG MODE ACTIVE!")
-    log("Application started")
-    experimental_feature_x()
-
-def stop():
-    """Stop the application."""
-    log("Application stopped")
-"@
-Set-Content -Path "app.py" -Value $appContent
-git add .
-git commit -m "Add debug mode - REMOVE THIS TOO!" | Out-Null
-
-Write-Host "[CREATED] mixed-reset branch with commits to reset --mixed" -ForegroundColor Green
-
-# ============================================================================
-# SCENARIO 3: Hard Reset (--hard) + Reflog Recovery
-# ============================================================================
-Write-Host "`nScenario 3: Creating hard-reset branch..." -ForegroundColor Cyan
-
-# Switch back to main and create hard-reset branch
-git switch main | Out-Null
-git switch -c hard-reset | Out-Null
-
-# Reset to basic state
-$utilsContent = @"
-# utils.py - Utility functions
-
-def helper_a():
-    """Helper function A."""
-    return "Helper A"
-
-def helper_b():
-    """Helper function B."""
-    return "Helper B"
-"@
-Set-Content -Path "utils.py" -Value $utilsContent
-git add .
-git commit -m "Add utility helpers" | Out-Null
-
-# Good commit: Add helper C
-$utilsContent = @"
-# utils.py - Utility functions
-
-def helper_a():
-    """Helper function A."""
-    return "Helper A"
-
-def helper_b():
-    """Helper function B."""
-    return "Helper B"
-
-def helper_c():
-    """Helper function C."""
-    return "Helper C"
-"@
-Set-Content -Path "utils.py" -Value $utilsContent
-git add .
-git commit -m "Add helper C" | Out-Null
-
-# BAD commit: Add broken helper D (completely wrong)
-$utilsContent = @"
-# utils.py - Utility functions
-
-def helper_a():
-    """Helper function A."""
-    return "Helper A"
-
-def helper_b():
-    """Helper function B."""
-    return "Helper B"
-
-def helper_c():
-    """Helper function C."""
-    return "Helper C"
-
-def helper_d():
-    """COMPLETELY BROKEN - throw away!"""
-    # This is all wrong and needs to be discarded
-    broken_code = "This doesn't even make sense"
-    return broken_code.nonexistent_method()  # Will crash!
-"@
-Set-Content -Path "utils.py" -Value $utilsContent
-git add .
-git commit -m "Add broken helper D - DISCARD COMPLETELY!" | Out-Null
-
-Write-Host "[CREATED] hard-reset branch with commit to reset --hard" -ForegroundColor Green
-
-# ============================================================================
-# Return to soft-reset to start
-# ============================================================================
-git switch soft-reset | Out-Null
-
-# Return to module directory
-Set-Location ..
-
-Write-Host "`n=== Setup Complete! ===`n" -ForegroundColor Green
-Write-Host "Three reset scenarios have been created:" -ForegroundColor Cyan
-Write-Host "  1. soft-reset   - Reset --soft (keep changes staged)" -ForegroundColor White
-Write-Host "  2. mixed-reset  - Reset --mixed (unstage changes)" -ForegroundColor White
-Write-Host "  3. hard-reset   - Reset --hard (discard everything) + reflog recovery" -ForegroundColor White
-Write-Host "`n⚠️  CRITICAL SAFETY REMINDER ⚠️" -ForegroundColor Red
-Write-Host "NEVER use git reset on commits that have been PUSHED!" -ForegroundColor Red
-Write-Host "These scenarios are LOCAL ONLY for practice." -ForegroundColor Yellow
-Write-Host "`nYou are currently on the 'soft-reset' branch." -ForegroundColor Cyan
-Write-Host "`nNext steps:" -ForegroundColor Cyan
-Write-Host "  1. cd challenge" -ForegroundColor White
-Write-Host "  2. Read the README.md for detailed instructions" -ForegroundColor White
-Write-Host "  3. Complete each reset challenge" -ForegroundColor White
-Write-Host "  4. Run '..\\verify.ps1' to check your solutions" -ForegroundColor White
-Write-Host ""

01-essentials/06-reset/verify.ps1

@@ -1,231 +0,0 @@
-#!/usr/bin/env pwsh
-<#
-.SYNOPSIS
-    Verifies the Module 06 challenge solutions.
-
-.DESCRIPTION
-    Checks that all three reset scenarios have been completed correctly:
-    - soft-reset: Commit reset but changes remain staged
-    - mixed-reset: Commits reset and changes unstaged
-    - hard-reset: Everything reset and discarded
-#>
-
-Write-Host "`n=== Verifying Module 06: Git Reset Solutions ===" -ForegroundColor Cyan
-Write-Host "⚠️  Remember: NEVER reset pushed commits! ⚠️" -ForegroundColor Red
-
-$allChecksPassed = $true
-$originalDir = Get-Location
-
-# Check if challenge directory exists
-if (-not (Test-Path "challenge")) {
-    Write-Host "[FAIL] Challenge directory not found. Run setup.ps1 first." -ForegroundColor Red
-    exit 1
-}
-
-Set-Location "challenge"
-
-# Check if git repository exists
-if (-not (Test-Path ".git")) {
-    Write-Host "[FAIL] Not a git repository. Run setup.ps1 first." -ForegroundColor Red
-    Set-Location $originalDir
-    exit 1
-}
-
-# ============================================================================
-# SCENARIO 1: Soft Reset Verification
-# ============================================================================
-Write-Host "`n=== Scenario 1: Soft Reset ===`n" -ForegroundColor Cyan
-
-git switch soft-reset 2>&1 | Out-Null
-
-if ($LASTEXITCODE -ne 0) {
-    Write-Host "[FAIL] soft-reset branch not found" -ForegroundColor Red
-    $allChecksPassed = $false
-} else {
-    # Count commits (should be 4: Initial + project setup + feature A + feature B)
-    $commitCount = [int](git rev-list --count HEAD 2>$null)
-
-    if ($commitCount -eq 4) {
-        Write-Host "[PASS] Commit count is 4 (feature C commit was reset)" -ForegroundColor Green
-    } else {
-        Write-Host "[FAIL] Expected 4 commits, found $commitCount" -ForegroundColor Red
-        Write-Host "[HINT] Use: git reset --soft HEAD~1" -ForegroundColor Yellow
-        $allChecksPassed = $false
-    }
-
-    # Check if changes are staged
-    $stagedChanges = git diff --cached --name-only 2>$null
-    if ($stagedChanges) {
-        Write-Host "[PASS] Changes are staged (feature C code in staging area)" -ForegroundColor Green
-
-        # Verify the staged changes contain feature C code
-        $stagedContent = git diff --cached 2>$null
-        if ($stagedContent -match "feature_c") {
-            Write-Host "[PASS] Staged changes contain feature C code" -ForegroundColor Green
-        } else {
-            Write-Host "[INFO] Staged changes don't seem to contain feature C" -ForegroundColor Yellow
-        }
-    } else {
-        Write-Host "[FAIL] No staged changes found" -ForegroundColor Red
-        Write-Host "[HINT] After --soft reset, changes should remain staged" -ForegroundColor Yellow
-        $allChecksPassed = $false
-    }
-
-    # Check working directory has no unstaged changes to tracked files
-    $unstagedChanges = git diff --name-only 2>$null
-    if (-not $unstagedChanges) {
-        Write-Host "[PASS] No unstaged changes (all changes are staged)" -ForegroundColor Green
-    } else {
-        Write-Host "[INFO] Found unstaged changes (expected only staged changes)" -ForegroundColor Yellow
-    }
-}
-
-# ============================================================================
-# SCENARIO 2: Mixed Reset Verification
-# ============================================================================
-Write-Host "`n=== Scenario 2: Mixed Reset ===`n" -ForegroundColor Cyan
-
-git switch mixed-reset 2>&1 | Out-Null
-
-if ($LASTEXITCODE -ne 0) {
-    Write-Host "[FAIL] mixed-reset branch not found" -ForegroundColor Red
-    $allChecksPassed = $false
-} else {
-    # Count commits (should be 3: Initial + lifecycle + logging, bad commits removed)
-    $commitCount = [int](git rev-list --count HEAD 2>$null)
-
-    if ($commitCount -eq 3) {
-        Write-Host "[PASS] Commit count is 3 (both bad commits were reset)" -ForegroundColor Green
-    } elseif ($commitCount -eq 4) {
-        Write-Host "[INFO] Commit count is 4 (one commit reset, need to reset one more)" -ForegroundColor Yellow
-        Write-Host "[HINT] Use: git reset HEAD~1 (or git reset --mixed HEAD~1)" -ForegroundColor Yellow
-        $allChecksPassed = $false
-    } else {
-        Write-Host "[FAIL] Expected 3 commits, found $commitCount" -ForegroundColor Red
-        Write-Host "[HINT] Use: git reset --mixed HEAD~2 to remove both bad commits" -ForegroundColor Yellow
-        $allChecksPassed = $false
-    }
-
-    # Check that there are NO staged changes
-    $stagedChanges = git diff --cached --name-only 2>$null
-    if (-not $stagedChanges) {
-        Write-Host "[PASS] No staged changes (--mixed unstages everything)" -ForegroundColor Green
-    } else {
-        Write-Host "[FAIL] Found staged changes (--mixed should unstage)" -ForegroundColor Red
-        Write-Host "[HINT] After --mixed reset, changes should be unstaged" -ForegroundColor Yellow
-        $allChecksPassed = $false
-    }
-
-    # Check that there ARE unstaged changes in working directory
-    $unstagedChanges = git diff --name-only 2>$null
-    if ($unstagedChanges) {
-        Write-Host "[PASS] Unstaged changes present in working directory" -ForegroundColor Green
-
-        # Verify unstaged changes contain the experimental/debug code
-        $workingContent = git diff 2>$null
-        if ($workingContent -match "experimental|DEBUG") {
-            Write-Host "[PASS] Unstaged changes contain the reset code" -ForegroundColor Green
-        } else {
-            Write-Host "[INFO] Unstaged changes don't contain expected code" -ForegroundColor Yellow
-        }
-    } else {
-        Write-Host "[FAIL] No unstaged changes found" -ForegroundColor Red
-        Write-Host "[HINT] After --mixed reset, changes should be in working directory (unstaged)" -ForegroundColor Yellow
-        $allChecksPassed = $false
-    }
-}
-
-# ============================================================================
-# SCENARIO 3: Hard Reset Verification
-# ============================================================================
-Write-Host "`n=== Scenario 3: Hard Reset ===`n" -ForegroundColor Cyan
-
-git switch hard-reset 2>&1 | Out-Null
-
-if ($LASTEXITCODE -ne 0) {
-    Write-Host "[FAIL] hard-reset branch not found" -ForegroundColor Red
-    $allChecksPassed = $false
-} else {
-    # Count commits (should be 3: Initial + utilities + helper C, bad commit removed)
-    $commitCount = [int](git rev-list --count HEAD 2>$null)
-
-    if ($commitCount -eq 3) {
-        Write-Host "[PASS] Commit count is 3 (broken commit was reset)" -ForegroundColor Green
-    } else {
-        Write-Host "[FAIL] Expected 3 commits, found $commitCount" -ForegroundColor Red
-        Write-Host "[HINT] Use: git reset --hard HEAD~1" -ForegroundColor Yellow
-        $allChecksPassed = $false
-    }
-
-    # Check that there are NO staged changes
-    $stagedChanges = git diff --cached --name-only 2>$null
-    if (-not $stagedChanges) {
-        Write-Host "[PASS] No staged changes (--hard discards everything)" -ForegroundColor Green
-    } else {
-        Write-Host "[FAIL] Found staged changes (--hard should discard all)" -ForegroundColor Red
-        $allChecksPassed = $false
-    }
-
-    # Check that there are NO unstaged changes
-    $unstagedChanges = git diff --name-only 2>$null
-    if (-not $unstagedChanges) {
-        Write-Host "[PASS] No unstaged changes (--hard discards everything)" -ForegroundColor Green
-    } else {
-        Write-Host "[FAIL] Found unstaged changes (--hard should discard all)" -ForegroundColor Red
-        $allChecksPassed = $false
-    }
-
-    # Check working directory is clean
-    $statusOutput = git status --porcelain 2>$null
-    if (-not $statusOutput) {
-        Write-Host "[PASS] Working directory is completely clean" -ForegroundColor Green
-    } else {
-        Write-Host "[INFO] Working directory has some changes" -ForegroundColor Yellow
-    }
-
-    # Verify the file doesn't have the broken code
-    if (Test-Path "utils.py") {
-        $utilsContent = Get-Content "utils.py" -Raw
-        if ($utilsContent -notmatch "helper_d") {
-            Write-Host "[PASS] Broken helper_d function is gone" -ForegroundColor Green
-        } else {
-            Write-Host "[FAIL] Broken helper_d still exists (wasn't reset)" -ForegroundColor Red
-            $allChecksPassed = $false
-        }
-
-        if ($utilsContent -match "helper_c") {
-            Write-Host "[PASS] Good helper_c function is preserved" -ForegroundColor Green
-        } else {
-            Write-Host "[FAIL] Good helper_c function missing" -ForegroundColor Red
-            $allChecksPassed = $false
-        }
-    }
-}
-
-Set-Location $originalDir
-
-# Final summary
-Write-Host ""
-if ($allChecksPassed) {
-    Write-Host "==========================================" -ForegroundColor Green
-    Write-Host "   CONGRATULATIONS! ALL SCENARIOS PASSED!" -ForegroundColor Green
-    Write-Host "==========================================" -ForegroundColor Green
-    Write-Host "`nYou've mastered git reset!" -ForegroundColor Cyan
-    Write-Host "You now understand:" -ForegroundColor Cyan
-    Write-Host "  ✓ Resetting commits with --soft (keep staged)" -ForegroundColor White
-    Write-Host "  ✓ Resetting commits with --mixed (unstage)" -ForegroundColor White
-    Write-Host "  ✓ Resetting commits with --hard (discard all)" -ForegroundColor White
-    Write-Host "  ✓ The DANGER of reset on shared history" -ForegroundColor White
-    Write-Host "`n⚠️  CRITICAL REMINDER ⚠️" -ForegroundColor Red
-    Write-Host "NEVER use 'git reset' on commits you've already PUSHED!" -ForegroundColor Red
-    Write-Host "Always use 'git revert' (Module 05) for shared commits!" -ForegroundColor Yellow
-    Write-Host "`nReady for Module 07: Git Stash!" -ForegroundColor Green
-    Write-Host ""
-    exit 0
-} else {
-    Write-Host "[SUMMARY] Some checks failed. Review the hints above and try again." -ForegroundColor Red
-    Write-Host "[INFO] You can run this verification script as many times as needed." -ForegroundColor Yellow
-    Write-Host "[REMINDER] Reset is ONLY for local, un-pushed commits!" -ForegroundColor Yellow
-    Write-Host ""
-    exit 1
-}

01-essentials/06-revert/README.md

@@ -0,0 +1,400 @@
+# Module 06: Git Revert - Safe Undoing
+
+## About This Module
+
+Welcome to Module 06, where you'll learn the **safe, team-friendly way to undo changes** in Git. Unlike destructive commands that erase history, `git revert` creates new commits that undo previous changes while preserving the complete project history.
+
+**Why revert is important:**
+- ✅ Safe for shared/pushed commits
+- ✅ Preserves complete history and audit trail
+- ✅ Transparent to your team
+- ✅ Can be undone itself if needed
+- ✅ Works with any commit in history
+
+**Key principle:** Revert doesn't erase mistakes—it documents how you fixed them.
+
+## Learning Objectives
+
+By completing this module, you will:
+
+1. Revert commits safely while preserving surrounding changes
+2. Understand how revert creates new commits instead of erasing history
+3. Revert multiple commits at once
+4. Know when to use revert vs. other undo strategies
+
+## Prerequisites
+
+Before starting this module, you should be comfortable with:
+- Creating commits (`git commit`)
+- Viewing commit history (`git log`)
+- Understanding branches (Module 03)
+
+## Setup
+
+Run the setup script to create the challenge environment:
+
+```pwsh
+.\setup.ps1
+```
+
+This creates a `challenge/` directory with two branches demonstrating different revert scenarios:
+- `regular-revert` - Basic commit reversion
+- `multi-revert` - Multiple commit reversion
+
+## Challenge 1: Reverting a Regular Commit
+
+### Scenario
+
+You're working on a calculator application. A developer added a `divide` function that crashes when dividing by zero. The bug was discovered after subsequent commits were made, so you can't just delete it—you need to revert it while keeping the commits that came after.
+
+### Your Task
+
+1. **Navigate to the challenge directory:**
+   ```pwsh
+   cd challenge
+   ```
+
+2. **Check which branch you're on** (you should be on `regular-revert`):
+   ```pwsh
+   git branch
+   ```
+   The `*` should be next to `regular-revert`.
+
+3. **View the commit history:**
+   ```pwsh
+   git log --oneline
+   ```
+
+4. **Find the commit with message:** "Add broken divide function - needs to be reverted!"
+   - Note the commit hash (the 7-character code at the start, like `a1b2c3d`)
+   - Write it down or copy it
+
+5. **Revert that specific commit** (replace `<commit-hash>` with the actual hash):
+   ```pwsh
+   git revert <commit-hash>
+   ```
+
+6. **Visual Studio Code will open** with the revert commit message:
+   - The default message is fine (it says "Revert 'Add broken divide function...'")
+   - Close the editor window to accept the commit message
+   - Git will create the revert commit
+
+### What to Observe
+
+After reverting, check your work:
+
+```pwsh
+# View the new revert commit in history
+git log --oneline
+
+# Check that divide.py file is gone (reverted)
+ls
+# You should see calculator.py but NOT divide.py
+
+# Check that modulo function still exists in calculator.py (it came after the bad commit)
+cat calculator.py
+# You should see def modulo
+
+# Check that multiply function still exists (it came before the bad commit)
+# (You already see it when you cat the file above)
+```
+
+**Key insight:** Revert creates a NEW commit that undoes the changes from the target commit, but leaves all other commits intact.
+
+### Understanding the Timeline
+
+```
+Before revert:
+main.py (initial) → multiply (good) → divide (BAD) → modulo (good)
+                                        ↑
+                                    We want to undo THIS
+
+After revert:
+main.py (initial) → multiply (good) → divide (BAD) → modulo (good) → revert divide (new commit)
+                                                                        ↑
+                                                                    Removes divide, keeps modulo
+```
+
+The revert commit adds a new point in history that undoes the divide changes.
+
+## Challenge 2: Reverting Multiple Commits
+
+### Scenario
+
+Two separate commits added broken mathematical functions (`square_root` and `logarithm`). Both have critical bugs and need to be removed. You can revert multiple commits at once.
+
+### Your Task
+
+1. **Switch to the multi-revert branch:**
+   ```pwsh
+   git switch multi-revert
+   ```
+
+2. **View the commit history:**
+   ```pwsh
+   git log --oneline
+   ```
+
+   Find the two bad commits:
+   - "Add broken square_root - REVERT THIS!"
+   - "Add broken logarithm - REVERT THIS TOO!"
+   
+   Note both commit hashes (write them down)
+
+3. **Revert both commits in one command** (replace with actual hashes):
+   ```pwsh
+   git revert <commit-hash-1> <commit-hash-2>
+   ```
+
+   **Important:** List commits from **oldest to newest** for cleanest history (square_root first, then logarithm).
+
+   **Alternatively**, revert them one at a time:
+   ```pwsh
+   git revert <commit-hash-1>
+   git revert <commit-hash-2>
+   ```
+
+4. **Visual Studio Code will open TWICE** (once for each revert):
+   - Close the editor each time to accept the default commit message
+   - Git will create two revert commits
+
+5. **Verify the result:**
+   ```pwsh
+   # View files - sqrt.py and logarithm.py should be gone
+   ls
+   # You should see calculator.py but NOT sqrt.py or logarithm.py
+
+   # Check that good functions remain in calculator.py
+   cat calculator.py
+   # You should see def power and def absolute
+   ```
+
+### Multi-Revert Strategies
+
+**Reverting a range of commits:**
+
+```pwsh
+# Revert commits from A to B (inclusive)
+git revert A^..B
+
+# Example: Revert last 3 commits
+git revert HEAD~3..HEAD
+```
+
+**Reverting without auto-commit:**
+
+```pwsh
+# Stage revert changes without committing
+git revert --no-commit <commit-hash>
+
+# Review changes
+git diff --staged
+
+# Commit when ready
+git commit
+```
+
+This is useful when reverting multiple commits and you want one combined revert commit.
+
+## Verification
+
+After completing both challenges, verify your solutions:
+
+```pwsh
+cd ..  # Return to module directory (if you're in challenge/)
+.\verify.ps1
+```
+
+Or from inside the challenge directory:
+
+```pwsh
+..\verify.ps1
+```
+
+The script checks that:
+- ✅ Revert commits were created (not destructive deletion)
+- ✅ Bad code is removed
+- ✅ Good code before and after is preserved
+
+## Command Reference
+
+### Basic Revert
+
+```pwsh
+# Revert a specific commit
+git revert <commit-hash>
+
+# Revert the most recent commit
+git revert HEAD
+
+# Revert the second-to-last commit
+git revert HEAD~1
+```
+
+### Reverting Old Commits
+
+```pwsh
+# Revert a specific commit from any point in history
+git revert <commit-hash>
+
+# Revert a commit from 5 commits ago
+git revert HEAD~5
+
+# View what a commit changed before reverting
+git show <commit-hash>
+```
+
+### Multiple Commits
+
+```pwsh
+# Revert multiple specific commits
+git revert <hash1> <hash2> <hash3>
+
+# Revert a range of commits (oldest^..newest)
+git revert <oldest-hash>^..<newest-hash>
+
+# Revert last 3 commits
+git revert HEAD~3..HEAD
+```
+
+### Revert Options
+
+```pwsh
+# Revert but don't commit automatically
+git revert --no-commit <commit-hash>
+
+# Revert and edit the commit message
+git revert --edit <commit-hash>
+
+# Revert without opening editor (use default message)
+git revert --no-edit <commit-hash>
+
+# Abort a revert in progress (if conflicts)
+git revert --abort
+
+# Continue revert after resolving conflicts
+git revert --continue
+```
+
+## When to Use Git Revert
+
+Use `git revert` when:
+
+- ✅ **Commits are already pushed** - Safe for shared history
+- ✅ **Working in a team** - Transparent to everyone
+- ✅ **Need audit trail** - Shows what was undone and why
+- ✅ **Public repositories** - Can't rewrite public history
+- ✅ **Undoing old commits** - Can revert commits from weeks ago
+- ✅ **Production hotfixes** - Safe emergency rollback
+
+**Golden Rule:** If others might have your commits, use revert.
+
+## When NOT to Use Git Revert
+
+Consider alternatives when:
+
+- ❌ **Commits are still local** - Use `git reset` instead (advanced module)
+- ❌ **Just want to edit a commit** - Use `git commit --amend`
+- ❌ **Haven't pushed yet** - Reset is cleaner for local cleanup, but more dangerous, stick to revert if in doubt
+- ❌ **Need to combine commits** - Use interactive rebase IF nothing has been pushed to cloud
+- ❌ **Reverting creates complex conflicts** - Might need manual fix forward
+
+## Revert vs. Reset vs. Rebase
+
+| Command | History | Safety | Use Case |
+|---------|---------|--------|----------|
+| **revert** | Preserves | ✅ Safe | Undo pushed commits |
+| **reset** | Erases | ⚠️ Dangerous | Clean up local commits |
+| **rebase** | Rewrites | ⚠️ Dangerous | Polish commit history |
+
+**This module teaches revert.** You'll learn reset in Module 06.
+
+## Handling Revert Conflicts
+
+Sometimes reverting causes conflicts if subsequent changes touched the same code:
+
+```pwsh
+# Start revert
+git revert <commit-hash>
+
+# If conflicts occur:
+# Conflict in calculator.py
+# CONFLICT (content): Merge conflict in calculator.py
+```
+
+**To resolve:**
+
+1. Open conflicted files and fix conflicts (look for `<<<<<<<` markers)
+2. Stage resolved files:
+   ```pwsh
+   git add <resolved-files>
+   ```
+3. Continue the revert:
+   ```pwsh
+   git revert --continue
+   ```
+
+Or abort if you change your mind:
+```pwsh
+git revert --abort
+```
+
+## Common Mistakes
+
+### 1. Using Reset on Pushed Commits
+
+```pwsh
+# ❌ NEVER do this with pushed commits. Or at least try your best to avoid it.
+git reset --hard HEAD~3
+
+# ✅ Do this instead
+git revert HEAD~3..HEAD
+```
+
+### 2. Reverting Commits in Wrong Order
+
+When reverting multiple related commits, revert from newest to oldest:
+
+```pwsh
+# If you have: A → B → C (and C depends on B)
+
+# ✅ Correct order
+git revert C
+git revert B
+
+# ❌ Wrong order (may cause conflicts)
+git revert B  # Conflict! C still references B
+git revert C
+```
+
+## Best Practices
+
+1. **Write clear revert messages:**
+   ```pwsh
+   git revert <hash> -m "Revert authentication - security issue #1234"
+   ```
+
+2. **Link to issue tracking:**
+   ```
+   Revert "Add new payment system"
+
+   This reverts commit abc123.
+
+   Critical bug in payment processing.
+   See bug tracker: ISSUE-1234
+   ```
+
+3. **Test after reverting:**
+   - Run your test suite
+   - Verify the application still works
+   - Check no unintended changes occurred
+
+4. **Communicate with team:**
+   - Announce reverts in team chat
+   - Explain why the revert was necessary
+   - Provide timeline for re-introducing the feature
+
+5. **Keep reverts focused:**
+   - Revert the minimum necessary
+   - Don't bundle multiple unrelated reverts
+   - One problem = one revert commit

01-essentials/06-revert/reset.ps1

@@ -8,7 +8,7 @@
     to create a fresh challenge environment.
 #>
 
-Write-Host "`n=== Resetting Module 06: Git Reset Challenge ===" -ForegroundColor Cyan
+Write-Host "`n=== Resetting Module 06: Git Revert Challenge ===" -ForegroundColor Cyan
 
 # Check if challenge directory exists
 if (Test-Path "challenge") {

01-essentials/06-revert/setup.ps1

@@ -0,0 +1,199 @@
+#!/usr/bin/env pwsh
+<#
+.SYNOPSIS
+    Sets up the Module 06 challenge environment for learning git revert.
+
+.DESCRIPTION
+    This script creates a challenge directory with two branches demonstrating
+    different revert scenarios:
+    - regular-revert: Basic revert of a single bad commit
+    - multi-revert: Reverting multiple commits at once
+#>
+
+Write-Host "`n=== Setting up Module 06: Git Revert Challenge ===" -ForegroundColor Cyan
+
+# Remove existing challenge directory if it exists
+if (Test-Path "challenge") {
+    Write-Host "Removing existing challenge directory..." -ForegroundColor Yellow
+    Remove-Item -Recurse -Force "challenge"
+}
+
+# Create fresh challenge directory
+Write-Host "Creating challenge directory..." -ForegroundColor Green
+New-Item -ItemType Directory -Path "challenge" | Out-Null
+Set-Location "challenge"
+
+# Initialize Git repository
+Write-Host "Initializing Git repository..." -ForegroundColor Green
+git init | Out-Null
+
+# Configure git for this repository
+git config user.name "Workshop Student"
+git config user.email "student@example.com"
+
+# Detect the default branch name after first commit (created below)
+# Will be detected after the initial commit in SCENARIO 1
+
+# ============================================================================
+# SCENARIO 1: Regular Revert (Basic)
+# ============================================================================
+Write-Host "`nScenario 1: Creating regular-revert branch..." -ForegroundColor Cyan
+
+# Initial commit
+$calcContent = @"
+# calculator.py - Simple calculator
+
+def add(a, b):
+    """Add two numbers."""
+    return a + b
+
+def subtract(a, b):
+    """Subtract b from a."""
+    return a - b
+"@
+Set-Content -Path "calculator.py" -Value $calcContent
+git add .
+git commit -m "Initial calculator implementation" | Out-Null
+
+# Detect the main branch name after first commit
+$mainBranch = git branch --show-current
+if (-not $mainBranch) {
+    $mainBranch = git config --get init.defaultBranch
+    if (-not $mainBranch) { $mainBranch = "main" }
+}
+Write-Host "Default branch detected: $mainBranch" -ForegroundColor Yellow
+
+# Create regular-revert branch
+git switch -c regular-revert | Out-Null
+
+# Good commit: Add multiply using append
+$multiplyFunc = @"
+
+def multiply(a, b):
+    """Multiply two numbers."""
+    return a * b
+"@
+Add-Content -Path "calculator.py" -Value $multiplyFunc
+git add .
+git commit -m "Add multiply function" | Out-Null
+
+# BAD commit: Add broken divide function using separate file
+$divideContent = @"
+# divide.py - Division functionality
+
+def divide(a, b):
+    """Divide a by b - BROKEN: doesn't handle division by zero!"""
+    return a / b  # This will crash if b is 0!
+"@
+Set-Content -Path "divide.py" -Value $divideContent
+git add .
+git commit -m "Add broken divide function - needs to be reverted!" | Out-Null
+
+# Good commit: Add modulo (after bad commit) using append
+$moduloFunc = @"
+
+def modulo(a, b):
+    """Return remainder of a divided by b."""
+    return a % b
+"@
+Add-Content -Path "calculator.py" -Value $moduloFunc
+git add .
+git commit -m "Add modulo function" | Out-Null
+
+Write-Host "[CREATED] regular-revert branch with bad divide commit" -ForegroundColor Green
+
+# ============================================================================
+# SCENARIO 2: Multi Revert (Multiple Bad Commits)
+# ============================================================================
+Write-Host "`nScenario 2: Creating multi-revert branch..." -ForegroundColor Cyan
+
+# Switch back to main
+git switch $mainBranch | Out-Null
+
+# Create multi-revert branch
+git switch -c multi-revert | Out-Null
+
+# Reset calculator to simple version
+$calcContent = @"
+# calculator.py - Simple calculator
+
+def add(a, b):
+    """Add two numbers."""
+    return a + b
+
+def subtract(a, b):
+    """Subtract b from a."""
+    return a - b
+"@
+Set-Content -Path "calculator.py" -Value $calcContent
+git add .
+git commit -m "Reset to basic calculator" | Out-Null
+
+# Good commit: Add power function using append
+$powerFunc = @"
+
+def power(a, b):
+    """Raise a to the power of b."""
+    return a ** b
+"@
+Add-Content -Path "calculator.py" -Value $powerFunc
+git add .
+git commit -m "Add power function" | Out-Null
+
+# BAD commit 1: Add broken square_root in separate file
+$sqrtContent = @"
+# sqrt.py - Square root functionality
+
+def square_root(a):
+    """BROKEN: Returns wrong result for negative numbers!"""
+    return a ** 0.5  # This returns NaN for negative numbers!
+"@
+Set-Content -Path "sqrt.py" -Value $sqrtContent
+git add .
+git commit -m "Add broken square_root - REVERT THIS!" | Out-Null
+
+# BAD commit 2: Add broken logarithm in separate file
+$logContent = @"
+# logarithm.py - Logarithm functionality
+
+def logarithm(a):
+    """BROKEN: Doesn't handle zero or negative numbers!"""
+    import math
+    return math.log(a)  # This crashes for a <= 0!
+"@
+Set-Content -Path "logarithm.py" -Value $logContent
+git add .
+git commit -m "Add broken logarithm - REVERT THIS TOO!" | Out-Null
+
+# Good commit: Add absolute value (after bad commits) using append
+$absoluteFunc = @"
+
+def absolute(a):
+    """Return absolute value of a."""
+    return abs(a)
+"@
+Add-Content -Path "calculator.py" -Value $absoluteFunc
+git add .
+git commit -m "Add absolute value function" | Out-Null
+
+Write-Host "[CREATED] multi-revert branch with two bad commits to revert" -ForegroundColor Green
+
+# ============================================================================
+# Return to regular-revert to start
+# ============================================================================
+git switch regular-revert | Out-Null
+
+# Return to module directory
+Set-Location ..
+
+Write-Host "`n=== Setup Complete! ===" -ForegroundColor Green
+Write-Host "`nTwo revert scenarios have been created:" -ForegroundColor Cyan
+Write-Host "  1. regular-revert   - Revert a single bad commit" -ForegroundColor White
+Write-Host "  2. multi-revert     - Revert multiple bad commits" -ForegroundColor White
+Write-Host "`nYou are currently on the 'regular-revert' branch." -ForegroundColor Cyan
+Write-Host "`nNext steps:" -ForegroundColor Cyan
+Write-Host "  1. cd challenge" -ForegroundColor White
+Write-Host "  2. Read the README.md for detailed instructions" -ForegroundColor White
+Write-Host "  3. Complete each revert challenge" -ForegroundColor White
+Write-Host "  4. Run '..\verify.ps1' to check your solutions" -ForegroundColor White
+Write-Host ""

01-essentials/06-revert/verify.ps1

@@ -1,16 +1,15 @@
 #!/usr/bin/env pwsh
 <#
 .SYNOPSIS
-    Verifies the Module 05 challenge solutions.
+    Verifies the Module 06 challenge solutions.
 
 .DESCRIPTION
-    Checks that all three revert scenarios have been completed correctly:
+    Checks that both revert scenarios have been completed correctly:
     - regular-revert: Single commit reverted
-    - merge-revert: Merge commit reverted with -m flag
     - multi-revert: Multiple commits reverted
 #>
 
-Write-Host "`n=== Verifying Module 05: Git Revert Solutions ===" -ForegroundColor Cyan
+Write-Host "`n=== Verifying Module 06: Git Revert Solutions ===" -ForegroundColor Cyan
 
 $allChecksPassed = $true
 $originalDir = Get-Location
@@ -51,19 +50,19 @@ if ($LASTEXITCODE -ne 0) {
         $allChecksPassed = $false
     }
 
-    # Check that calculator.py exists
+    # Check that divide.py is removed (was reverted)
+    if (-not (Test-Path "divide.py")) {
+        Write-Host "[PASS] Broken divide.py successfully reverted (file removed)" -ForegroundColor Green
+    } else {
+        Write-Host "[FAIL] divide.py still exists (should be reverted)" -ForegroundColor Red
+        Write-Host "[HINT] The bad commit should be reverted, removing divide.py" -ForegroundColor Yellow
+        $allChecksPassed = $false
+    }
+
+    # Check that calculator.py exists and has correct content
     if (Test-Path "calculator.py") {
         $calcContent = Get-Content "calculator.py" -Raw
 
-        # Check that divide function is NOT in the code (was reverted)
-        if ($calcContent -notmatch "def divide") {
-            Write-Host "[PASS] Broken divide function successfully reverted" -ForegroundColor Green
-        } else {
-            Write-Host "[FAIL] divide function still exists (should be reverted)" -ForegroundColor Red
-            Write-Host "[HINT] The bad commit should be reverted, removing the divide function" -ForegroundColor Yellow
-            $allChecksPassed = $false
-        }
-
         # Check that modulo function still exists (should be preserved)
         if ($calcContent -match "def modulo") {
             Write-Host "[PASS] modulo function preserved (good commit after bad one)" -ForegroundColor Green
@@ -87,60 +86,9 @@ if ($LASTEXITCODE -ne 0) {
 }
 
 # ============================================================================
-# SCENARIO 2: Merge Revert Verification
+# SCENARIO 2: Multi Revert Verification
 # ============================================================================
-Write-Host "`n=== Scenario 2: Merge Revert ===" -ForegroundColor Cyan
-
-git switch merge-revert 2>&1 | Out-Null
-
-if ($LASTEXITCODE -ne 0) {
-    Write-Host "[FAIL] merge-revert branch not found" -ForegroundColor Red
-    $allChecksPassed = $false
-} else {
-    # Check that a revert commit for the merge exists
-    $revertMerge = git log --oneline --grep="Revert.*Merge" 2>$null
-    if ($revertMerge) {
-        Write-Host "[PASS] Merge revert commit found" -ForegroundColor Green
-    } else {
-        Write-Host "[FAIL] No merge revert commit found" -ForegroundColor Red
-        Write-Host "[HINT] Use: git revert -m 1 <merge-commit-hash>" -ForegroundColor Yellow
-        $allChecksPassed = $false
-    }
-
-    # Check that the original merge commit still exists (revert doesn't erase it)
-    $mergeCommit = git log --merges --oneline --grep="Merge feature-auth" 2>$null
-    if ($mergeCommit) {
-        Write-Host "[PASS] Original merge commit still in history (not erased)" -ForegroundColor Green
-    } else {
-        Write-Host "[INFO] Original merge commit not found (this is OK if you used a different approach)" -ForegroundColor Yellow
-    }
-
-    # Check that auth.py no longer exists or its effects are reverted
-    if (-not (Test-Path "auth.py")) {
-        Write-Host "[PASS] auth.py removed (merge reverted successfully)" -ForegroundColor Green
-    } else {
-        Write-Host "[INFO] auth.py still exists (check if merge was fully reverted)" -ForegroundColor Yellow
-    }
-
-    # Check that calculator.py exists
-    if (Test-Path "calculator.py") {
-        $calcContent = Get-Content "calculator.py" -Raw
-
-        # After reverting the merge, calculator shouldn't import auth
-        if ($calcContent -notmatch "from auth import") {
-            Write-Host "[PASS] Auth integration reverted from calculator.py" -ForegroundColor Green
-        } else {
-            Write-Host "[FAIL] calculator.py still imports auth (merge not fully reverted)" -ForegroundColor Red
-            Write-Host "[HINT] Reverting the merge should remove the auth integration" -ForegroundColor Yellow
-            $allChecksPassed = $false
-        }
-    }
-}
-
-# ============================================================================
-# SCENARIO 3: Multi Revert Verification
-# ============================================================================
-Write-Host "`n=== Scenario 3: Multi Revert ===" -ForegroundColor Cyan
+Write-Host "`n=== Scenario 2: Multi Revert ===" -ForegroundColor Cyan
 
 git switch multi-revert 2>&1 | Out-Null
 
@@ -160,26 +108,26 @@ if ($LASTEXITCODE -ne 0) {
         $allChecksPassed = $false
     }
 
+    # Check that sqrt.py is removed (reverted)
+    if (-not (Test-Path "sqrt.py")) {
+        Write-Host "[PASS] Broken sqrt.py successfully reverted (file removed)" -ForegroundColor Green
+    } else {
+        Write-Host "[FAIL] sqrt.py still exists (should be reverted)" -ForegroundColor Red
+        $allChecksPassed = $false
+    }
+
+    # Check that logarithm.py is removed (reverted)
+    if (-not (Test-Path "logarithm.py")) {
+        Write-Host "[PASS] Broken logarithm.py successfully reverted (file removed)" -ForegroundColor Green
+    } else {
+        Write-Host "[FAIL] logarithm.py still exists (should be reverted)" -ForegroundColor Red
+        $allChecksPassed = $false
+    }
+
     # Check calculator.py content
     if (Test-Path "calculator.py") {
         $calcContent = Get-Content "calculator.py" -Raw
 
-        # Check that square_root is NOT in code (reverted)
-        if ($calcContent -notmatch "def square_root") {
-            Write-Host "[PASS] Broken square_root function reverted" -ForegroundColor Green
-        } else {
-            Write-Host "[FAIL] square_root function still exists (should be reverted)" -ForegroundColor Red
-            $allChecksPassed = $false
-        }
-
-        # Check that logarithm is NOT in code (reverted)
-        if ($calcContent -notmatch "def logarithm") {
-            Write-Host "[PASS] Broken logarithm function reverted" -ForegroundColor Green
-        } else {
-            Write-Host "[FAIL] logarithm function still exists (should be reverted)" -ForegroundColor Red
-            $allChecksPassed = $false
-        }
-
         # Check that power function still exists (good commit before bad ones)
         if ($calcContent -match "def power") {
             Write-Host "[PASS] power function preserved" -ForegroundColor Green
@@ -211,11 +159,10 @@ if ($allChecksPassed) {
     Write-Host "=========================================" -ForegroundColor Green
     Write-Host "`nYou've mastered git revert!" -ForegroundColor Cyan
     Write-Host "You now understand:" -ForegroundColor Cyan
-    Write-Host "  ✓ Reverting regular commits safely" -ForegroundColor White
-    Write-Host "  ✓ Reverting merge commits with -m flag" -ForegroundColor White
+    Write-Host "  ✓ Reverting commits safely without erasing history" -ForegroundColor White
     Write-Host "  ✓ Reverting multiple commits at once" -ForegroundColor White
-    Write-Host "  ✓ Preserving history while undoing changes" -ForegroundColor White
-    Write-Host "`nReady for Module 06: Git Reset!" -ForegroundColor Green
+    Write-Host "  ✓ Preserving all other commits while undoing specific changes" -ForegroundColor White
+    Write-Host "`nReady for Module 07: Git Reset!" -ForegroundColor Green
     Write-Host ""
     exit 0
 } else {

01-essentials/07-stash/README.md

@@ -1,4 +1,4 @@
-# Module 11: Stash
+# Module 07: Git Stash - Temporary Storage
 
 ## Learning Objectives
 
@@ -64,12 +64,112 @@ stash@{2}  <- Oldest stash
 
 You can have multiple stashes and apply any of them.
 
-## Useful Commands
+## Setup
 
-```bash
-# Stash current changes
+Run the setup script to create the challenge environment:
+
+```pwsh
+.\setup.ps1
+```
+
+This creates a `challenge/` directory where you're working on a login feature with uncommitted changes, and a critical bug needs fixing on main.
+
+## Your Task
+
+### The Scenario
+
+You're working on a login feature on the `feature-login` branch. Your work is incomplete (has TODOs), so it's not ready to commit.
+
+Suddenly, your teammate reports a **critical security bug** in production! You need to:
+1. Temporarily save your incomplete work
+2. Switch to the main branch
+3. Fix the urgent bug
+4. Return to your feature and continue working
+
+### Step-by-Step Instructions
+
+1. **Navigate to the challenge directory:**
+   ```pwsh
+   cd challenge
+   ```
+
+2. **Check your current status:**
+   ```pwsh
+   git status
+   ```
+   You should see modified `login.py` (uncommitted changes)
+
+3. **Stash your work with a message:**
+   ```pwsh
+   git stash save "WIP: login feature"
+   ```
+   
+4. **Verify working directory is clean:**
+   ```pwsh
+   git status
+   ```
+   Should say "nothing to commit, working tree clean"
+
+5. **Switch to main branch:**
+   ```pwsh
+   git switch main
+   ```
+
+6. **Open app.py and find the bug:**
+   ```pwsh
+   cat app.py
+   ```
+   Look for the comment "# BUG: This allows unauthenticated access!"
+
+7. **Fix the bug** by editing app.py:
+   - Remove the buggy comment line
+   - You can leave the implementation as-is or improve it
+   - The important thing is removing the comment that says "allows unauthenticated access"
+
+8. **Commit the fix:**
+   ```pwsh
+   git add app.py
+   git commit -m "Fix critical security bug"
+   ```
+
+9. **Switch back to your feature branch:**
+   ```pwsh
+   git switch feature-login
+   ```
+
+10. **Restore your stashed work:**
+    ```pwsh
+    git stash pop
+    ```
+    This applies the stash and removes it from the stash stack
+
+11. **Complete the TODOs in login.py:**
+    - Open login.py in your editor
+    - Complete the login method (verify password and return session)
+    - Add a logout method
+    - Remove all TODO comments
+
+12. **Commit your completed feature:**
+    ```pwsh
+    git add login.py
+    git commit -m "Complete login feature"
+    ```
+
+13. **Verify your solution:**
+    ```pwsh
+    ..\verify.ps1
+    ```
+
+## Key Stash Commands
+
+### Basic Operations
+
+```pwsh
+# Stash current changes with a message
+git stash save "description"
+
+# Stash without a message (not recommended)
 git stash
-git stash save "description"  # With a descriptive message
 
 # Stash including untracked files
 git stash -u
@@ -77,7 +177,17 @@ git stash -u
 # List all stashes
 git stash list
 
-# Apply most recent stash and remove it from stack
+# Show what's in the most recent stash
+git stash show
+
+# Show full diff of stash
+git stash show -p
+```
+
+### Applying Stashes
+
+```pwsh
+# Apply most recent stash and remove it (RECOMMENDED)
 git stash pop
 
 # Apply most recent stash but keep it in stack
@@ -86,114 +196,192 @@ git stash apply
 # Apply a specific stash
 git stash apply stash@{1}
 
-# Show what's in a stash
-git stash show
-git stash show -p  # Show full diff
+# Apply a specific stash by number
+git stash apply 1
+```
 
-# Drop (delete) a stash
-git stash drop stash@{0}
+### Managing Stashes
+
+```pwsh
+# Drop (delete) the most recent stash
+git stash drop
+
+# Drop a specific stash
+git stash drop stash@{1}
 
 # Clear all stashes
 git stash clear
 
-# Create a branch from a stash
+# Create a new branch from a stash
 git stash branch new-branch-name
 ```
 
+## Understanding Stash vs Pop vs Apply
+
+### Stash Pop (Recommended)
+```pwsh
+git stash pop
+```
+- Applies the stash to your working directory
+- **Removes** the stash from the stack
+- Use this most of the time
+
+### Stash Apply (Keep Stash)
+```pwsh
+git stash apply
+```
+- Applies the stash to your working directory
+- **Keeps** the stash in the stack
+- Useful if you want to apply the same changes to multiple branches
+
+### When to Use Which
+
+**Use `pop` when:**
+- You're done with the stash and won't need it again (99% of the time)
+- You want to keep your stash list clean
+
+**Use `apply` when:**
+- You want to test the same changes on different branches
+- You're not sure if you want to keep the stash yet
+
 ## Verification
 
 Run the verification script to check your solution:
 
-```bash
+```pwsh
+..\verify.ps1
+```
+
+Or from the module directory:
+
+```pwsh
 .\verify.ps1
 ```
 
 The verification will check that:
-- The bug fix commit exists on main
-- Your feature is completed on the feature branch
-- Changes were properly stashed and restored
-- No uncommitted changes remain
+- ✅ The bug fix commit exists on main
+- ✅ Your feature is completed on the feature-login branch
+- ✅ All TODOs are removed from login.py
+- ✅ No uncommitted changes remain
 
-## Challenge Steps
+## Troubleshooting
 
-1. Navigate to the challenge directory
-2. You're on feature-login with uncommitted changes
-3. Check status: `git status` (you'll see modified files)
-4. Stash your changes: `git stash save "WIP: login feature"`
-5. Verify working directory is clean: `git status`
-6. Switch to main: `git switch main`
-7. View the bug in app.js and fix it (remove the incorrect line)
-8. Commit the fix: `git add app.js && git commit -m "Fix critical security bug"`
-9. Switch back to feature: `git switch feature-login`
-10. Restore your work: `git stash pop`
-11. Complete the feature (the TODOs in login.js)
-12. Commit your completed feature
-13. Run verification
+### "Cannot switch branches - you have uncommitted changes"
 
-## Tips
+**Problem:** Git won't let you switch branches with uncommitted changes.
 
-- Always use `git stash save "message"` to describe what you're stashing
-- Use `git stash list` to see all your stashes
-- `git stash pop` applies and removes the stash (use this most often)
-- `git stash apply` keeps the stash (useful if you want to apply it to multiple branches)
-- Stashes are local - they don't get pushed to remote repositories
-- You can stash even if you have changes to different files
-- Stash before pulling to avoid merge conflicts
-- Use `git stash show -p` to preview what's in a stash before applying
+**Solution:**
+```pwsh
+# Stash your changes first
+git stash save "work in progress"
 
-## Common Stash Scenarios
+# Now you can switch
+git switch other-branch
 
-### Scenario 1: Quick Branch Switch
-```bash
-# Working on feature, need to switch to main
-git stash
-git switch main
-# Do work on main
-git switch feature
+# When you come back, restore your work
+git switch original-branch
 git stash pop
 ```
 
-### Scenario 2: Pull with Local Changes
-```bash
-# You have local changes but need to pull
-git stash
-git pull
-git stash pop
-# Resolve any conflicts
+### "I don't remember what's in my stash"
+
+**Problem:** You stashed something but forgot what it was.
+
+**Solution:**
+```pwsh
+# List all stashes
+git stash list
+
+# Show summary of what changed
+git stash show stash@{0}
+
+# Show full diff
+git stash show -p stash@{0}
 ```
 
-### Scenario 3: Experimental Changes
-```bash
-# Try something experimental
-git stash  # Save current work
-# Make experimental changes
-# Decide you don't like it
-git restore .  # Discard experiment
-git stash pop  # Restore original work
-```
+### "Stash conflicts when I apply"
 
-### Scenario 4: Apply to Multiple Branches
-```bash
-# Same fix needed on multiple branches
-git stash
-git switch branch1
-git stash apply
-git commit -am "Apply fix"
-git switch branch2
-git stash apply
-git commit -am "Apply fix"
-git stash drop  # Clean up when done
-```
+**Problem:** Applying a stash causes merge conflicts.
 
-## Stash Conflicts
-
-If applying a stash causes conflicts:
-1. Git will mark the conflicts in your files
-2. Resolve conflicts manually (like merge conflicts)
+**Solution:**
+1. Git marks conflicts in your files with `<<<<<<<` markers
+2. Open the files and resolve conflicts manually
 3. Stage the resolved files: `git add <file>`
-4. The stash is automatically dropped after successful pop
+4. If you used `pop`, the stash is automatically dropped
 5. If you used `apply`, manually drop it: `git stash drop`
 
-## What You'll Learn
+### "I accidentally cleared my stash"
 
-Git stash is an essential tool for managing context switches in your daily workflow. It lets you maintain a clean working directory while preserving incomplete work, making it easy to handle interruptions, urgent fixes, and quick branch switches. Mastering stash makes you more efficient and helps avoid the temptation to make "WIP" commits just to switch branches. Think of stash as your temporary workspace that follows you around.
+**Problem:** You deleted a stash you still needed.
+
+**Unfortunately:** Stashes are hard to recover once deleted. Lessons learned:
+- Use `git stash pop` instead of `git stash drop` when you're unsure
+- Use `git stash show -p` to preview before dropping
+- Consider committing work instead of stashing for important changes
+
+## Tips for Success
+
+💡 **Always add a message** - `git stash save "your message"` helps you remember what you stashed  
+💡 **Use pop, not apply** - Pop removes the stash automatically, keeping your stash list clean  
+💡 **Stash before pulling** - Avoid merge conflicts when pulling updates  
+💡 **Preview before applying** - Use `git stash show -p` to see what's in a stash  
+💡 **Stashes are local** - They don't get pushed to remote repositories  
+💡 **Clean working directory** - Always verify with `git status` after stashing  
+
+## Common Use Cases
+
+### Quick Branch Switch
+```pwsh
+# You're working on feature-A
+git stash save "feature A progress"
+git switch hotfix-branch
+# Fix the issue, commit
+git switch feature-A
+git stash pop
+```
+
+### Pull with Local Changes
+```pwsh
+# You have uncommitted changes
+git stash save "local changes"
+git pull
+git stash pop
+# Resolve conflicts if any
+```
+
+### Test Clean State
+```pwsh
+# Stash changes to test on clean code
+git stash save "testing clean state"
+# Run tests
+git stash pop  # Restore your changes
+```
+
+## What You've Learned
+
+After completing this module, you understand:
+
+- ✅ Stash temporarily saves uncommitted changes
+- ✅ Stash lets you switch contexts without committing
+- ✅ `git stash pop` applies and removes the stash
+- ✅ `git stash apply` applies but keeps the stash
+- ✅ Stashes are local and not pushed to remote
+- ✅ Stash is essential for handling interruptions and urgent fixes
+
+**Key Takeaway:** Stash is your "temporary clipboard" for incomplete work. It helps you stay productive when you need to context-switch without making messy "WIP" commits.
+
+## Next Steps
+
+Ready to continue? You've now mastered the essential Git commands for daily development:
+- Committing and history
+- Branching and merging
+- Cherry-picking specific changes
+- Safely reverting commits
+- Temporarily stashing work
+
+Move on to **Module 08: Multiplayer Git** to practice collaborating with others!
+
+To start over:
+```pwsh
+.\reset.ps1
+```

01-essentials/07-stash/setup.ps1

@@ -25,6 +25,9 @@ git init | Out-Null
 git config user.name "Workshop User" | Out-Null
 git config user.email "user@workshop.local" | Out-Null
 
+# Detect the default branch name after first commit (created below)
+# Will be detected after the initial commit
+
 # Create initial application on main
 $app = @"
 class Application:
@@ -45,6 +48,14 @@ Set-Content -Path "app.py" -Value $app
 git add app.py
 git commit -m "Initial application" | Out-Null
 
+# Detect the main branch name after first commit
+$mainBranch = git branch --show-current
+if (-not $mainBranch) {
+    $mainBranch = git config --get init.defaultBranch
+    if (-not $mainBranch) { $mainBranch = "main" }
+}
+Write-Host "Default branch detected: $mainBranch" -ForegroundColor Yellow
+
 $readme = @"
 # MyApp
 
@@ -78,7 +89,7 @@ git add login.py
 git commit -m "Start login service implementation" | Out-Null
 
 # Add a critical bug to main branch (simulating a bug that was introduced)
-git checkout main | Out-Null
+git checkout $mainBranch | Out-Null
 
 $appWithBug = @"
 class Application:
@@ -140,16 +151,17 @@ Write-Host "========================================" -ForegroundColor Green
 Write-Host "`nSituation:" -ForegroundColor Cyan
 Write-Host "You're working on the login feature (feature-login branch)" -ForegroundColor White
 Write-Host "You have uncommitted changes - the feature is NOT complete yet" -ForegroundColor Yellow
-Write-Host "`nUrgent: A critical security bug was found in production (main branch)!" -ForegroundColor Red
+Write-Host "`nUrgent: A critical security bug was found in production ($mainBranch branch)!" -ForegroundColor Red
 Write-Host "You need to fix it immediately, but your current work isn't ready to commit." -ForegroundColor Red
+Write-Host "`nDetected main branch: $mainBranch" -ForegroundColor Cyan
 Write-Host "`nYour task:" -ForegroundColor Yellow
 Write-Host "1. Navigate to the challenge directory: cd challenge" -ForegroundColor White
 Write-Host "2. Check your status: git status (see uncommitted changes)" -ForegroundColor White
 Write-Host "3. Stash your work: git stash save 'WIP: login feature'" -ForegroundColor White
-Write-Host "4. Switch to main: git checkout main" -ForegroundColor White
+Write-Host "4. Switch to ${mainBranch}: git switch $mainBranch" -ForegroundColor White
 Write-Host "5. Fix the security bug in app.py (remove the comment and fix the auth)" -ForegroundColor White
 Write-Host "6. Commit the fix: git add app.py && git commit -m 'Fix critical security bug'" -ForegroundColor White
-Write-Host "7. Switch back: git checkout feature-login" -ForegroundColor White
+Write-Host "7. Switch back: git switch feature-login" -ForegroundColor White
 Write-Host "8. Restore your work: git stash pop" -ForegroundColor White
 Write-Host "9. Complete the TODOs in login.py" -ForegroundColor White
 Write-Host "10. Commit your completed feature" -ForegroundColor White

01-essentials/07-stash/verify.ps1

@@ -32,6 +32,21 @@ if (-not (Test-Path ".git")) {
     exit 1
 }
 
+# Detect the main branch name
+$allBranches = git branch --list 2>$null | ForEach-Object { $_.Trim('* ') }
+if ($allBranches -contains "main") {
+    $mainBranch = "main"
+} elseif ($allBranches -contains "master") {
+    $mainBranch = "master"
+} else {
+    $mainBranch = git config --get init.defaultBranch
+    if (-not $mainBranch) {
+        $mainBranch = $allBranches | Select-Object -First 1
+        if (-not $mainBranch) { $mainBranch = "main" }
+    }
+}
+Write-Host "Detected main branch: $mainBranch" -ForegroundColor Cyan
+
 # Check current branch
 $currentBranch = git branch --show-current 2>$null
 if ($currentBranch -ne "feature-login") {
@@ -53,14 +68,22 @@ if ($status) {
 }
 
 # Verify main branch has the security fix
-Write-Host "`nChecking main branch for bug fix..." -ForegroundColor Cyan
-git checkout main 2>$null | Out-Null
+Write-Host "`nChecking $mainBranch branch for bug fix..." -ForegroundColor Cyan
+git checkout $mainBranch 2>$null | Out-Null
 
 # Check for bug fix commit
-$mainCommits = git log --pretty=format:"%s" main 2>$null
-if ($mainCommits -notmatch "security bug|Fix.*bug|security fix") {
-    Write-Host "[FAIL] No security bug fix commit found on main branch." -ForegroundColor Red
-    Write-Host "Hint: After stashing, switch to main and commit a bug fix" -ForegroundColor Yellow
+$mainCommits = git log --pretty=format:"%s" $mainBranch 2>$null
+$hasSecurityFix = $false
+foreach ($commit in $mainCommits) {
+    if ($commit -match "security|Fix.*bug") {
+        $hasSecurityFix = $true
+        break
+    }
+}
+
+if (-not $hasSecurityFix) {
+    Write-Host "[FAIL] No security bug fix commit found on $mainBranch branch." -ForegroundColor Red
+    Write-Host "Hint: After stashing, switch to $mainBranch and commit a bug fix" -ForegroundColor Yellow
     git checkout feature-login 2>$null | Out-Null
     Set-Location ..
     exit 1
@@ -68,7 +91,7 @@ if ($mainCommits -notmatch "security bug|Fix.*bug|security fix") {
 
 # Check that app.py has been fixed
 if (-not (Test-Path "app.py")) {
-    Write-Host "[FAIL] app.py not found on main branch." -ForegroundColor Red
+    Write-Host "[FAIL] app.py not found on $mainBranch branch." -ForegroundColor Red
     git checkout feature-login 2>$null | Out-Null
     Set-Location ..
     exit 1
@@ -113,7 +136,7 @@ if (-not (Test-Path "login.py")) {
 $loginContent = Get-Content "login.py" -Raw
 
 # Check that login method exists and is implemented
-if ($loginContent -notmatch "login\(username, password\)") {
+if ($loginContent -notmatch "def login") {
     Write-Host "[FAIL] login.py should have a login method." -ForegroundColor Red
     Set-Location ..
     exit 1

01-essentials/08-multiplayer/01_FACILITATOR.md

@@ -0,0 +1,237 @@
+# Facilitator Setup Guide
+
+This guide helps workshop facilitators set up the cloud-based multiplayer Git module using Azure DevOps.
+
+## Overview
+
+The Number Challenge is a collaborative Git exercise where students work together on a shared repository hosted on **Azure DevOps**.
+
+**What participants will do:**
+- Clone a real repository from Azure DevOps
+- Collaborate to sort numbers 0-20 into the correct order
+- Experience push/pull workflow and merge conflicts
+- Learn to communicate and coordinate with teammates
+- Use SSH keys for secure authentication
+
+---
+
+## Prerequisites
+
+### Azure DevOps Setup
+
+You need:
+- **Azure DevOps Organization** - Free tier is sufficient
+  - Sign up at [dev.azure.com](https://dev.azure.com)
+- **Project created** within your organization
+- **Admin access** to create repositories and manage users
+
+### Workshop Materials
+
+Participants need:
+- Git installed (version 2.23+)
+- VS Code (or any text editor)
+- SSH keys configured
+
+---
+
+## Pre-Workshop Setup
+
+### Step 1: Add User Accounts
+
+Add workshop participants to your Azure DevOps organization.
+
+1. Navigate to **Organization Settings** → **Users**
+2. Click **Add users**
+3. Enter participant email addresses (Microsoft accounts)
+4. Select your workshop project
+5. Select **Access level**: Stakeholder (free) or Basic
+6. Click **Add**
+
+### Step 2: Create the Repository
+
+Create the shared repository: **number-challenge**
+
+1. Sign in to Azure DevOps at [dev.azure.com](https://dev.azure.com)
+2. Navigate to your **Project**
+3. Click **Repos** in the left navigation
+4. Click the repo dropdown → **New repository**
+5. Fill in details:
+   - **Name:** `number-challenge`
+   - **Add a README:** Checked
+6. Click **Create**
+
+### Step 3: Add the Starter File
+
+Create `numbers.txt` with numbers 0-20 in random order.
+
+**Option A: Via Azure DevOps web UI**
+
+1. In your repository, click **+ New** → **File**
+2. Name it `numbers.txt`
+3. Add this content (numbers 0-20 shuffled):
+
+```
+17
+3
+12
+8
+19
+1
+14
+6
+11
+0
+20
+9
+4
+16
+2
+18
+7
+13
+5
+15
+10
+```
+
+4. Click **Commit**
+
+**Option B: Via command line**
+
+```powershell
+git clone git@ssh.dev.azure.com:v3/{organization}/{project}/number-challenge
+cd number-challenge
+
+# Create numbers.txt with shuffled numbers
+@"
+17
+3
+12
+8
+19
+1
+14
+6
+11
+0
+20
+9
+4
+16
+2
+18
+7
+13
+5
+15
+10
+"@ | Out-File -FilePath numbers.txt -Encoding UTF8
+
+git add numbers.txt
+git commit -m "feat: add shuffled numbers for challenge"
+git push
+```
+
+### Step 4: Verify Student Access
+
+Students added to the project automatically have access. Verify:
+
+1. Go to **Project Settings** → **Repositories** → **number-challenge**
+2. Click **Security** tab
+3. Verify project team has **Contribute** permission
+
+---
+
+## During the Workshop
+
+### Getting Started
+
+1. Ensure all students have cloned the repository
+2. Have everyone open `numbers.txt` to see the shuffled numbers
+3. Explain the goal: sort numbers 0-20 into correct order
+
+### The Exercise Flow
+
+1. **Students pull** the latest changes
+2. **One person** moves a number to its correct position
+3. **They commit and push**
+4. **Others pull** and see the change
+5. **Repeat** until sorted
+
+### Creating Conflicts (The Learning Moment)
+
+Conflicts happen naturally when multiple people edit at once. You can encourage this:
+
+- Have two students deliberately edit at the same time
+- Watch them experience the push rejection
+- Guide them through pulling and resolving the conflict
+
+### Monitoring Progress
+
+Check progress in Azure DevOps:
+
+- **Repos → Commits**: See who's contributing
+- **Repos → Files → numbers.txt**: See current state
+
+### Common Issues
+
+**"I can't push!"**
+- Did they pull first? Run `git pull`
+- Is SSH set up? Check with `ssh -T git@ssh.dev.azure.com`
+
+**"Merge conflict!"**
+- Walk them through removing conflict markers
+- Help them understand both sides of the conflict
+
+**"Numbers are duplicated/missing!"**
+- Someone resolved a conflict incorrectly
+- Have the team review and fix together
+
+---
+
+## Success
+
+When complete, `numbers.txt` should contain:
+
+```
+0
+1
+2
+3
+4
+5
+6
+7
+8
+9
+10
+11
+12
+13
+14
+15
+16
+17
+18
+19
+20
+```
+
+Celebrate the team's success!
+
+---
+
+## Post-Workshop Cleanup
+
+To reuse the repository:
+
+1. Reset `numbers.txt` to shuffled state
+2. Or delete and recreate the repository
+
+---
+
+## Tips
+
+- **Keep groups small** (2 people per repository) for more interaction
+- **Encourage communication** - the exercise works best when people talk
+- **Let conflicts happen** - they're the best learning opportunity

01-essentials/08-multiplayer/02_AZURE-DEVOPS-SSH-SETUP.md

@@ -0,0 +1,237 @@
+# Azure DevOps SSH Setup - Best Practices Guide
+
+This guide provides comprehensive instructions for setting up SSH authentication with Azure DevOps. SSH is the recommended authentication method for secure Git operations.
+
+## Why SSH is Best Practice
+
+SSH (Secure Shell) keys provide a secure way to authenticate with Azure DevOps without exposing passwords or tokens. Here's why SSH is the security best practice:
+
+**Security Benefits:**
+- **No Password Exposure**: Your credentials never travel over the network
+- **Strong Encryption**: Uses RSA cryptographic algorithms
+- **No Credential Prompts**: Seamless authentication after initial setup
+- **Revocable**: Individual keys can be removed without changing passwords
+- **Auditable**: Track which key was used for each operation
+
+---
+
+## Prerequisites
+
+Before starting, ensure you have:
+
+- **Git 2.23 or higher** installed
+  ```powershell
+  git --version
+  ```
+
+- **Azure DevOps account** with access to your organization/project
+  - If you don't have one, create a free account at [dev.azure.com](https://dev.azure.com)
+
+- **PowerShell 7+ or Bash terminal** for running commands
+  ```powershell
+  pwsh --version
+  ```
+
+---
+
+## Step 1: Generate SSH Key Pair
+
+SSH authentication uses a key pair: a private key (stays on your computer) and a public key (uploaded to Azure DevOps).
+
+### Generate RSA Key
+
+Open your terminal and run:
+
+```powershell
+ssh-keygen -t rsa
+```
+
+**Note about RSA:** Azure DevOps currently only supports RSA SSH keys. While newer algorithms like Ed25519 offer better security and performance, they are not yet supported by Azure DevOps. See the note at the end of this guide for more information.
+
+### Save Location
+
+When prompted for the file location, press `Enter` to accept the default:
+
+```
+Enter file in which to save the key (/Users/yourname/.ssh/id_rsa):
+```
+
+**Default locations:**
+- **Windows**: `C:\Users\YourName\.ssh\id_rsa` and  `C:\Users\YourName\.ssh\id_rsa.pub`
+
+### Passphrase (Optional but Recommended)
+
+You'll be prompted to enter a passphrase, just press `Enter` no password is needed (recommended but not needed):
+
+```
+Enter passphrase (empty for no passphrase):
+Enter same passphrase again:
+```
+
+### Verify Key Generation
+
+Check that your keys were created:
+
+**Windows PowerShell:**
+```powershell
+dir $HOME\.ssh\
+```
+
+You should see two files:
+- `id_rsa` - Private key (NEVER share this)
+- `id_rsa.pub` - Public key (safe to share for upload to Azure DevOps)
+
+---
+
+## Step 2: Add SSH Public Key to Azure DevOps
+
+Now you'll upload your public key to Azure DevOps.
+
+### Navigate to SSH Public Keys Settings
+
+1. Sign in to Azure DevOps at [https://dev.azure.com](https://dev.azure.com)
+2. Click your **profile icon** in the top-right corner
+3. Select **User settings** from the dropdown menu
+4. Click **SSH Public Keys**
+
+![Azure DevOps - User Settings Menu](./images/02_ssh_option.png)
+*Navigate to your user settings by clicking the profile icon in the top-right corner*
+
+### Add New SSH Key
+
+5. Click the **+ New Key** button
+
+![Azure DevOps - Add SSH Public Key Dialog](./images/03_add_new_key.png)
+*Click '+ New Key' to begin adding your SSH public key*
+
+### Copy Your Public Key
+
+Open your terminal and display your public key:
+
+**Linux/Mac:**
+```bash
+cat ~/.ssh/id_rsa.pub
+```
+
+**Windows PowerShell:**
+```powershell
+type $HOME\.ssh\id_rsa.pub
+```
+
+**Windows Command Prompt:**
+```cmd
+type %USERPROFILE%\.ssh\id_rsa.pub
+```
+
+The output will look like this:
+```
+ssh-rsa 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 your@email.com
+```
+
+**Copy the entire output** (from `ssh-rsa` to your email address).
+
+
+### Paste and Name Your Key
+
+![Azure DevOps - Add SSH Public Key Dialog](./images/04_copy_paste_key.png)
+
+6. In the Azure DevOps dialog:
+   - **Name**: Give your key a descriptive name (e.g., "Workshop Laptop 2026", "Home Desktop", "Work MacBook")
+   - **Public Key Data**: Paste the entire public key you just copied
+7. Click **Save**
+
+**Naming tip**: Use names that help you identify which machine uses each key. This makes it easier to revoke keys later if needed.
+
+---
+
+## Step 3: Using SSH with Git
+
+Now that SSH is configured, you can use it for all Git operations.
+
+### Clone a Repository with SSH
+
+To clone a repository using SSH:
+
+```bash
+git clone git@ssh.dev.azure.com:v3/{organization}/{project}/{repository}
+```
+
+**Example** (replace placeholders with your actual values):
+```bash
+git clone git@ssh.dev.azure.com:v3/myorg/git-workshop/great-print-project
+```
+
+**How to find your SSH URL:**
+1. Navigate to your repository in Azure DevOps
+  ![Azure DevOps - Repositories](./images/05_repos.png)
+2. Click **Clone** in the top-right
+3. Select **SSH** from the dropdown
+4. Copy the SSH URL
+
+![Azure DevOps - Get SSH Clone URL](./images/06_choose_ssh.png)
+*Select SSH from the clone dialog to get your repository's SSH URL*
+
+### Daily Git Operations
+
+All standard Git commands now work seamlessly with SSH:
+
+```bash
+# Pull latest changes
+git pull
+
+# Push your commits
+git push
+
+# Fetch from remote
+git fetch
+
+# Push a new branch
+git push -u origin feature-branch
+```
+
+**No more credential prompts!** SSH authentication happens automatically.
+
+---
+
+## Additional Resources
+- **Azure DevOps SSH Documentation**: [https://docs.microsoft.com/en-us/azure/devops/repos/git/use-ssh-keys-to-authenticate](https://docs.microsoft.com/en-us/azure/devops/repos/git/use-ssh-keys-to-authenticate)
+- **SSH Key Best Practices**: [https://security.stackexchange.com/questions/tagged/ssh-keys](https://security.stackexchange.com/questions/tagged/ssh-keys)
+- **Git with SSH**: [https://git-scm.com/book/en/v2/Git-on-the-Server-Generating-Your-SSH-Public-Key](https://git-scm.com/book/en/v2/Git-on-the-Server-Generating-Your-SSH-Public-Key)
+
+---
+
+## Quick Reference
+
+### Common Commands
+
+```bash
+# Generate RSA key
+ssh-keygen -t
+
+# Display public key (Linux/Mac)
+cat ~/.ssh/id_rsa.pub
+
+# Display public key (Windows)
+type $HOME\.ssh\id_rsa.pub
+
+# Clone with SSH
+git clone git@ssh.dev.azure.com:v3/{org}/{project}/{repo}
+
+# Check remote URL
+git remote -v
+```
+
+### SSH URL Format
+
+```
+git@ssh.dev.azure.com:v3/{organization}/{project}/{repository}
+```
+
+**Example:**
+```
+git@ssh.dev.azure.com:v3/novenco/software/git-workshop
+```
+
+---
+
+**You're all set!** SSH authentication with RSA keys is now configured for secure, passwordless Git operations with Azure DevOps.

01-essentials/08-multiplayer/03_README.md

@@ -0,0 +1,167 @@
+# Multiplayer Git
+
+Work with others using branches and pull requests.
+
+## Goal
+
+Learn to collaborate on a shared repository using:
+- **Branches** - work independently without breaking main
+- **Pull Requests** - review and merge changes safely
+
+## The Workflow
+
+```
+1. Create branch    →    2. Make changes    →    3. Push branch
+                                                       ↓
+6. Delete branch    ←    5. Merge PR        ←    4. Create PR
+```
+
+This is how professional teams work together on code.
+
+---
+
+## Step 1: Clone the Repository
+
+Get the repository URL from your facilitator, then:
+
+```powershell
+git clone <repository-url>
+code <repository-name>
+```
+
+---
+
+## Step 2: Create a Branch
+
+Never work directly on `main`. Create your own branch:
+
+```powershell
+git switch -c <branch>
+```
+
+This creates a new branch and switches to it.
+
+---
+
+## Step 3: Make Changes
+
+1. Open `numbers.txt` in VS Code
+2. Move one number to its correct position
+3. Save the file (`Ctrl+S`)
+
+---
+
+## Step 4: Commit and Push
+
+```powershell
+git add .
+git commit -m "fix: move 7 to correct position"
+git push <branch-name>
+```
+
+Your branch is now on Azure DevOps.
+
+---
+
+## Step 5: Create a Pull Request
+
+[Detailed guide](https://learn.microsoft.com/en-us/azure/devops/repos/git/pull-requests?view=azure-devops&tabs=browser#create-a-pull-request)
+
+1. Go to Azure DevOps in your browser
+2. Navigate to **Repos** → **Pull Requests** 3. Click **New Pull Request**
+4. Set:
+   - **Source branch:** `<branch-name>`
+   - **Target branch:** `main`
+5. Add a title describing your change
+6. Click **Create**
+
+---
+
+## Step 6: Review and Merge
+
+1. Review the changes shown in the PR (Person B)
+2. If everything looks good, click **Complete**
+3. Select **Complete merge**
+4. Your changes are now in `main`
+
+---
+
+## Step 7: Update Your Local Main
+
+After merging, update your local copy:
+
+```powershell
+git switch main
+git pull
+```
+
+---
+
+## Step 8: Repeat
+
+1. Create a new branch for your next change
+2. Make changes, commit, push
+3. Create another PR
+4. Continue until all numbers are sorted
+
+---
+
+## Step 9: Create a merge conflict
+
+1. Both people should create a branch with changes to `feature-1` and `feature-2`, you task is to change the position of number 5. Where you place it is up to you.
+2. Now both people should push their respective branch `git push <the-branch>`
+3. Now merge `feature-1` branch first, going throught the Pull Request flow.
+4. Then merge `feature-2` branch second, and notice you'll get a MERGE CONFLICT.
+5. It is not the owner of `feature-2` branch to resolve the conflict. This is done by merge the `main` branch into `feature-2` locally and so the owner of `feature-2` has to do the following
+    ```pwsh
+    # First get the latest changes on main
+    git switch main
+    git pull
+
+    # Then go back to the branch you can from
+    git switch feature-2
+
+    # Now we resolve the merge. We're merging the main branch INTO the feature-2 branch.
+    git merge main
+    # Resolve the merge conflict in numbers.txt
+    # Once resolved
+    git add numbers.txt
+    git commit
+    # VSCode will open up with a default message of "Merge main into feature-2"
+    # finish the commit. And push the changes
+    git push
+    ```
+6. Now the owner of `feature-2` can checkout the pull request on azure again and see that the merge conflict has been resolved and can therefore "Complete" the merge request, using the button in the top right corner with the name "Complete"
+
+## Quick Reference
+
+| Command | What It Does |
+|---------|--------------|
+| `git switch -c <name>` | Create and switch to new branch |
+| `git push -u origin <branch>` | Push branch to Azure DevOps |
+| `git switch main` | Switch to main branch |
+| `git pull` | Get latest changes from remote |
+
+---
+
+## Common Issues
+
+### "My PR has conflicts"
+1. Update your branch with latest main:
+   ```powershell
+   git switch main
+   git pull
+   git switch <branch-name>
+   git merge main
+   ```
+2. Resolve conflicts in VS Code
+3. Commit and push again
+
+### "I need to make more changes to my PR"
+
+Just commit and push to the same branch - the PR updates automatically:
+```powershell
+git add .
+git commit -m "fix: address review feedback"
+git push
+```

01-essentials/08-multiplayer/FACILITATOR-SETUP.md

@@ -1,904 +0,0 @@
-# Facilitator Setup Guide - The Great Print Project
-
-This guide helps workshop facilitators set up the cloud-based multiplayer Git module.
-
-## Overview
-
-The Great Print Project is a collaborative Git exercise where pairs of students work together on a shared repository hosted on your Gitea server at **https://git.frod.dk/multiplayer**.
-
-**What participants will do:**
-- Clone a real repository from your server
-- Collaborate with partners on shared branches
-- Deliberately create and resolve merge conflicts
-- Create pull requests and review code
-- Experience the full collaborative Git workflow
-
----
-
-## Prerequisites
-
-### Gitea Server Setup
-
-You should have:
-- Gitea running at https://git.frod.dk/multiplayer
-- Admin access to create repositories and users
-- HTTPS or SSH access enabled for Git operations
-
-**Need to set up Gitea?** See the main workshop's `GITEA-SETUP.md` for Docker + Cloudflare Tunnel instructions.
-
-### Workshop Materials
-
-Participants need:
-- Access to the module README in `01_essentials/09-multiplayer/README.md`
-- Git installed (version 2.23+)
-- Python 3.6+ (to run the print project)
-- Text editor
-
----
-
-## Pre-Workshop Setup
-
-### Step 1: Create User Accounts
-
-Create individual Gitea accounts for each participant.
-
-**Recommended naming:**
-- `student01`, `student02`, `student03`, etc.
-- Or use their real names/emails if preferred
-
-**Two approaches:**
-
-**Option A: Manual account creation**
-1. Go to Gitea admin panel
-2. Create users one by one
-3. Set initial passwords (students can change later)
-4. Provide credentials to students
-
-**Option B: Self-registration** (if you trust your network)
-1. Enable self-registration in Gitea settings
-2. Provide registration URL to students
-3. They create their own accounts
-4. You verify and approve accounts
-
-**Access tokens (recommended for HTTPS):**
-- Have students create personal access tokens after logging in
-- Settings → Applications → Generate New Token
-- Token needs `repo` scope
-- Students use token as password when pushing/pulling
-
-### Step 2: Create the Repository
-
-Create the shared repository: **great-print-project**
-
-**Via Gitea web UI:**
-1. Log in as admin or organization account
-2. Click "+" → "New Repository"
-3. **Name:** `great-print-project`
-4. **Owner:** `multiplayer` (organization) or your admin account
-5. **Visibility:** Private (only visible to students you add)
-6. **Initialize:** Check "Initialize this repository with selected files"
-7. **README:** Yes
-8. **License:** None
-9. **.gitignore:** Python
-10. Click "Create Repository"
-
-**Via command line (alternative):**
-```bash
-# Create local directory
-mkdir great-print-project
-cd great-print-project
-
-# Initialize git
-git init
-
-# Add files (see Step 3)
-git add .
-git commit -m "Initial commit: The Great Print Project"
-
-# Create bare repo on server
-ssh user@git.frod.dk
-cd /path/to/gitea/repositories/multiplayer
-git init --bare great-print-project.git
-exit
-
-# Push to server
-git remote add origin git@git.frod.dk:multiplayer/great-print-project.git
-git push -u origin main
-```
-
-### Step 3: Add Starter Code to Repository
-
-Commit these four files to the repository:
-
-#### File 1: main.py
-
-```python
-#!/usr/bin/env python3
-"""
-The Great Print Project
-A collaborative Git exercise
-
-When everyone completes their assigned functions,
-this program will print the complete alphabet and numbers!
-"""
-
-from letters import print_letters
-from numbers import print_numbers
-
-def main():
-    print("=" * 50)
-    print("    THE GREAT PRINT PROJECT")
-    print("=" * 50)
-    print("\nLetters:")
-    print_letters()
-    print()  # New line after letters
-
-    print("\nNumbers:")
-    print_numbers()
-    print()  # New line after numbers
-
-    print("\n" + "=" * 50)
-    print("    PROJECT COMPLETE!")
-    print("=" * 50)
-
-if __name__ == "__main__":
-    main()
-```
-
-#### File 2: letters.py
-
-```python
-"""
-Letter Printing Functions
-Each pair completes their assigned functions.
-
-Expected output: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
-"""
-
-def print_a():
-    """Print letter A - EXAMPLE (already completed)"""
-    print("A", end=" ")
-
-def print_b():
-    # TODO: Pair 1 - implement this function
-    pass
-
-def print_c():
-    # TODO: Pair 1 - implement this function
-    pass
-
-def print_d():
-    # TODO: Pair 1 - implement this function
-    pass
-
-def print_e():
-    # TODO: Pair 2 - implement this function
-    pass
-
-def print_f():
-    # TODO: Pair 2 - implement this function
-    pass
-
-def print_g():
-    # TODO: Pair 2 - implement this function
-    pass
-
-def print_h():
-    # TODO: Pair 3 - implement this function
-    pass
-
-def print_i():
-    # TODO: Pair 3 - implement this function
-    pass
-
-def print_j():
-    # TODO: Pair 3 - implement this function
-    pass
-
-def print_k():
-    # TODO: Pair 4 - implement this function
-    pass
-
-def print_l():
-    # TODO: Pair 4 - implement this function
-    pass
-
-def print_m():
-    # TODO: Pair 4 - implement this function
-    pass
-
-def print_n():
-    # TODO: Pair 5 - implement this function
-    pass
-
-def print_o():
-    # TODO: Pair 5 - implement this function
-    pass
-
-def print_p():
-    # TODO: Pair 5 - implement this function
-    pass
-
-def print_q():
-    # TODO: Pair 6 - implement this function
-    pass
-
-def print_r():
-    # TODO: Pair 6 - implement this function
-    pass
-
-def print_s():
-    # TODO: Pair 6 - implement this function
-    pass
-
-def print_t():
-    # TODO: Pair 7 - implement this function
-    pass
-
-def print_u():
-    # TODO: Pair 7 - implement this function
-    pass
-
-def print_v():
-    # TODO: Pair 7 - implement this function
-    pass
-
-def print_w():
-    # TODO: Pair 8 - implement this function
-    pass
-
-def print_x():
-    # TODO: Pair 8 - implement this function
-    pass
-
-def print_y():
-    # TODO: Pair 8 - implement this function
-    pass
-
-def print_z():
-    # TODO: Pair 9 - implement this function
-    pass
-
-
-def print_letters():
-    """Print all letters A-Z"""
-    print_a()
-    print_b()
-    print_c()
-    print_d()
-    print_e()
-    print_f()
-    print_g()
-    print_h()
-    print_i()
-    print_j()
-    print_k()
-    print_l()
-    print_m()
-    print_n()
-    print_o()
-    print_p()
-    print_q()
-    print_r()
-    print_s()
-    print_t()
-    print_u()
-    print_v()
-    print_w()
-    print_x()
-    print_y()
-    print_z()
-```
-
-#### File 3: numbers.py
-
-```python
-"""
-Number Printing Functions
-Each pair completes their assigned functions.
-
-Expected output: 0 1 2 3 4 5 6 7 8 9
-"""
-
-def print_0():
-    # TODO: Pair 9 - implement this function
-    pass
-
-def print_1():
-    # TODO: Pair 10 - implement this function
-    pass
-
-def print_2():
-    # TODO: Pair 10 - implement this function
-    pass
-
-def print_3():
-    # TODO: Pair 10 - implement this function
-    pass
-
-def print_4():
-    # TODO: Pair 11 - implement this function
-    pass
-
-def print_5():
-    # TODO: Pair 11 - implement this function
-    pass
-
-def print_6():
-    # TODO: Pair 11 - implement this function
-    pass
-
-def print_7():
-    # TODO: Pair 12 - implement this function
-    pass
-
-def print_8():
-    # TODO: Pair 12 - implement this function
-    pass
-
-def print_9():
-    # TODO: Pair 12 - implement this function
-    pass
-
-
-def print_numbers():
-    """Print all numbers 0-9"""
-    print_0()
-    print_1()
-    print_2()
-    print_3()
-    print_4()
-    print_5()
-    print_6()
-    print_7()
-    print_8()
-    print_9()
-```
-
-#### File 4: assignments.md
-
-```markdown
-# Pair Assignments
-
-## How This Works
-
-Each pair is assigned 3 functions to implement. You'll work together on a shared branch.
-
-**Important:** Check with your facilitator for your pair number and assignment!
-
----
-
-## Assignments
-
-### Pair 1
-- **Functions:** `print_b()`, `print_c()`, `print_d()`
-- **File:** `letters.py`
-- **Branch:** `pair-1-bcd`
-
-### Pair 2
-- **Functions:** `print_e()`, `print_f()`, `print_g()`
-- **File:** `letters.py`
-- **Branch:** `pair-2-efg`
-
-### Pair 3
-- **Functions:** `print_h()`, `print_i()`, `print_j()`
-- **File:** `letters.py`
-- **Branch:** `pair-3-hij`
-
-### Pair 4
-- **Functions:** `print_k()`, `print_l()`, `print_m()`
-- **File:** `letters.py`
-- **Branch:** `pair-4-klm`
-
-### Pair 5
-- **Functions:** `print_n()`, `print_o()`, `print_p()`
-- **File:** `letters.py`
-- **Branch:** `pair-5-nop`
-
-### Pair 6
-- **Functions:** `print_q()`, `print_r()`, `print_s()`
-- **File:** `letters.py`
-- **Branch:** `pair-6-qrs`
-
-### Pair 7
-- **Functions:** `print_t()`, `print_u()`, `print_v()`
-- **File:** `letters.py`
-- **Branch:** `pair-7-tuv`
-
-### Pair 8
-- **Functions:** `print_w()`, `print_x()`, `print_y()`
-- **File:** `letters.py`
-- **Branch:** `pair-8-wxy`
-
-### Pair 9
-- **Functions:** `print_z()`, `print_0()`, `print_1()`
-- **Files:** `letters.py`, `numbers.py`
-- **Branch:** `pair-9-z01`
-
-### Pair 10
-- **Functions:** `print_2()`, `print_3()`, `print_4()`
-- **File:** `numbers.py`
-- **Branch:** `pair-10-234`
-
-### Pair 11
-- **Functions:** `print_5()`, `print_6()`, `print_7()`
-- **File:** `numbers.py`
-- **Branch:** `pair-11-567`
-
-### Pair 12
-- **Functions:** `print_8()`, `print_9()`
-- **File:** `numbers.py`
-- **Branch:** `pair-12-89`
-
----
-
-## Example Implementation
-
-```python
-def print_a():
-    """Print letter A - EXAMPLE (already completed)"""
-    print("A", end=" ")
-```
-
-**Your functions should follow the same pattern:**
-
-```python
-def print_x():
-    """Print letter/number X"""
-    print("X", end=" ")
-```
-
----
-
-## Testing
-
-After implementing your functions, test with:
-
-```bash
-python main.py
-```
-
-You should see your letters/numbers in the output!
-
----
-
-## Questions?
-
-Ask your facilitator for:
-- Your pair number
-- Your Gitea credentials
-- Help with authentication setup
-- Any Git or Python issues
-```
-
-#### File 5: README.md (in repository)
-
-```markdown
-# The Great Print Project 🎯
-
-A collaborative Git exercise for learning teamwork with version control!
-
-## Goal
-
-When everyone completes their assigned functions, running `python main.py` will print:
-
-```
-==================================================
-    THE GREAT PRINT PROJECT
-==================================================
-
-Letters:
-A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
-
-Numbers:
-0 1 2 3 4 5 6 7 8 9
-
-==================================================
-    PROJECT COMPLETE!
-==================================================
-```
-
-## Your Mission
-
-1. Find your pair assignment in `assignments.md`
-2. Clone this repository
-3. Create your feature branch
-4. Implement your assigned functions
-5. Practice collaboration: push, pull, resolve conflicts
-6. Create a pull request
-7. Celebrate when your code is merged!
-
-## Quick Start
-
-```bash
-# Clone the repository
-git clone https://git.frod.dk/multiplayer/great-print-project.git
-cd great-print-project
-
-# Check your assignment
-cat assignments.md
-
-# Create your branch (replace X with your pair number)
-git switch -c pair-X-feature
-
-# Edit your file (letters.py or numbers.py)
-# Implement your functions
-
-# Test it
-python main.py
-
-# Commit and push
-git add .
-git commit -m "Implement print_x() functions"
-git push -u origin pair-X-feature
-```
-
-## Files
-
-- **main.py** - Orchestrator (runs the whole program)
-- **letters.py** - Functions for printing A-Z
-- **numbers.py** - Functions for printing 0-9
-- **assignments.md** - See which functions your pair should implement
-
-## Need Help?
-
-See the module README in the workshop repository for detailed step-by-step instructions!
-
-**Happy Collaborating! 🚀**
-```
-
-**Commit these files:**
-
-```bash
-git add main.py letters.py numbers.py assignments.md README.md
-git commit -m "Add Great Print Project starter code"
-git push origin main
-```
-
-### Step 4: Grant Student Access
-
-Add students as collaborators with write access:
-
-**Via Gitea web UI:**
-1. Go to repository → Settings → Collaborators
-2. Add each student account
-3. Set permission level: **Write** (allows push, pull, branch creation)
-
-**Important:** Students need **Write** access to:
-- Create branches
-- Push commits
-- Create pull requests
-
-### Step 5: Configure Branch Protection (Optional)
-
-To prevent accidental pushes to main:
-
-1. Repository → Settings → Branches
-2. Add protection rule for `main` branch
-3. Settings:
-   - **Block direct pushes:** Yes (requires pull requests)
-   - **Require PR reviews:** Optional (you can review PRs yourself)
-   - **Auto-merge:** Disabled (you merge manually or students do)
-
-This ensures students:
-- MUST use feature branches
-- MUST create pull requests
-- Can't accidentally break main
-
-**For beginners:** Consider allowing students to merge their own PRs after approval to complete the full workflow.
-
-### Step 6: Test the Setup
-
-Before the workshop, test as a student would:
-
-```bash
-# Clone as a test student
-git clone https://git.frod.dk/multiplayer/great-print-project.git
-cd great-print-project
-
-# Run the program
-python main.py
-# Should show only "A" with missing letters/numbers
-
-# Create test branch
-git switch -c test-branch
-
-# Edit letters.py, add print_b()
-def print_b():
-    print("B", end=" ")
-
-# Commit and push
-git add letters.py
-git commit -m "Test commit"
-git push -u origin test-branch
-
-# Create test pull request
-# (Do this via web UI)
-
-# Clean up test branch after
-git push origin --delete test-branch
-```
-
----
-
-## During the Workshop
-
-### Pairing Students
-
-**Strategies for assigning pairs:**
-
-**Option 1: Random pairing**
-- Use a random number generator
-- Pair students as they arrive
-
-**Option 2: Skill-based pairing**
-- Mix experienced and beginner students
-- Balance pair capabilities
-
-**Option 3: Let them choose**
-- Students pick their own partners
-- Good for building team dynamics
-
-**Announce pairs clearly:**
-- Write on board/screen: "Pair 1: Alice & Bob"
-- Provide printed assignment sheet
-- Update `assignments.md` in repo if needed
-
-### Timeline
-
-**Suggested schedule for 2-hour session:**
-
-- **0:00-0:10** (10 min): Introduction, distribute credentials
-- **0:10-0:20** (10 min): Students clone repo, verify access
-- **0:20-0:35** (15 min): Part 1 - Getting Started
-- **0:35-0:55** (20 min): Part 2 - First Contribution
-- **0:55-1:25** (30 min): Part 3 - Conflict Exercise (key learning!)
-- **1:25-1:45** (20 min): Part 4 - Pull Requests
-- **1:45-2:00** (15 min): Part 5 - Syncing, Q&A, wrap-up
-
-### Monitoring Progress
-
-**Use Gitea to track:**
-
-1. **Branches created:** Repository → Branches
-   - Should see `pair-1-bcd`, `pair-2-efg`, etc.
-
-2. **Commits:** Repository → Commits
-   - Each pair should have multiple commits
-
-3. **Pull requests:** Repository → Pull Requests
-   - Should see one PR per pair
-
-**Walk around the room:**
-- Check screens for conflict markers
-- Ask pairs how they're resolving conflicts
-- Ensure both partners are engaged
-
-**Common issues to watch for:**
-- Partners not using the same branch name
-- Forgetting to pull before pushing
-- Not removing conflict markers completely
-- Committing to main instead of feature branch
-
-### Managing Pull Requests
-
-**Your role:**
-
-**Option A: Review and merge yourself**
-- Teaches students what good reviews look like
-- Ensures quality before merging
-- More facilitator work
-
-**Option B: Students merge their own**
-- More autonomous learning
-- Students experience complete workflow
-- Risk of messy main branch
-
-**Recommended approach:**
-1. First 2-3 PRs: You review and merge (demonstrate good practices)
-2. Remaining PRs: Students review each other, you approve
-3. Students can merge after approval
-
-**What to check in PR reviews:**
-- Functions implemented correctly
-- No conflict markers in code
-- Code follows pattern (e.g., `print("X", end=" ")`)
-- Meaningful commit messages
-
-### Handling Problems
-
-**Common issues and solutions:**
-
-**Problem: "I can't push!"**
-- Check they're authenticated (token or SSH key)
-- Check they pulled latest changes first
-- Check branch name matches their partner's
-
-**Problem: "Merge conflict won't resolve!"**
-- Walk through Part 3 step-by-step with them
-- Show them the conflict markers
-- Verify they removed ALL markers
-- Run `python main.py` together to test
-
-**Problem: "We both committed to main!"**
-- Have them create proper feature branch
-- Use `git cherry-pick` to move commits
-- Reset main to origin/main
-
-**Problem: "GitHub Desktop / GUI tool shows something different"**
-- Recommend command line for this exercise
-- GUIs can hide important details during conflicts
-
-### Celebrating Success
-
-When all pairs have merged:
-
-```bash
-git pull origin main
-python main.py
-```
-
-**Everyone should see:**
-```
-==================================================
-    THE GREAT PRINT PROJECT
-==================================================
-
-Letters:
-A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
-
-Numbers:
-0 1 2 3 4 5 6 7 8 9
-
-==================================================
-    PROJECT COMPLETE!
-==================================================
-```
-
-**Take a screenshot!** Share it with the class. This is a genuine collaborative achievement.
-
----
-
-## Post-Workshop
-
-### Cleanup (Optional)
-
-**Keep the repository for future workshops:**
-- Delete all feature branches: `git push origin --delete pair-1-bcd` (etc.)
-- Reset main to initial state
-- Reuse for next cohort
-
-**Archive the session:**
-- Export final repository state
-- Take screenshots of successful PRs
-- Save for portfolio/examples
-
-### Student Takeaways
-
-Provide students:
-- Link to repository (they can clone for reference)
-- Completion certificate (if applicable)
-- Next steps: contributing to open source, Git resources
-
----
-
-## Troubleshooting
-
-### Gitea Server Issues
-
-**Problem: Server unreachable**
-- Check Cloudflare Tunnel is running: `cloudflared tunnel info`
-- Verify Gitea container is up: `docker ps`
-- Check firewall rules
-
-**Problem: SSH not working**
-- Verify SSH port is exposed in docker-compose.yml
-- Check Cloudflare Tunnel config includes SSH
-- Test: `ssh -T git@git.frod.dk`
-
-**Problem: HTTPS clone fails**
-- Check certificate validity
-- Try `GIT_SSL_NO_VERIFY=true git clone ...` (temporary workaround)
-- Configure Gitea to use proper HTTPS certificates
-
-### Authentication Issues
-
-**Problem: Students can't log in**
-- Verify accounts created and active
-- Reset passwords if needed
-- Check email verification isn't blocking (disable for workshop)
-
-**Problem: Push fails with authentication error**
-- HTTPS: Ensure students use access token, not password
-- SSH: Verify keys added to Gitea account
-- Check repo permissions (must be Write, not Read)
-
-### Git Workflow Issues
-
-**Problem: Students create PR but can't merge**
-- Check branch protection rules
-- Verify they have Write access
-- Ensure PR doesn't have conflicts
-
-**Problem: Main branch gets messy**
-- Reset to last good commit: `git reset --hard <commit>`
-- Force push: `git push --force origin main` (CAREFUL!)
-- Or start fresh: delete repo, recreate with starter code
-
----
-
-## Tips for Success
-
-### Before Workshop
-
-- Test the entire flow yourself as a student
-- Prepare credential sheets for each student
-- Have backup plan if server goes down (local git exercise)
-- Prepare slides explaining merge conflicts visually
-
-### During Workshop
-
-- **Start on time** - respect everyone's schedule
-- **Pair programming** - ensure both partners engage
-- **Encourage talking** - best conflicts are resolved by discussion
-- **Celebrate small wins** - first push, first conflict resolution
-- **Walk the room** - see screens, answer questions live
-
-### After Workshop
-
-- Gather feedback - what worked, what didn't
-- Note timing - were parts too rushed or too slow?
-- Archive successful PRs as examples
-- Plan improvements for next session
-
----
-
-## Scaling Considerations
-
-### Small Groups (4-8 students, 2-4 pairs)
-
-- More hands-on facilitator time
-- Can review all PRs in detail
-- Easier to monitor progress
-
-### Medium Groups (10-20 students, 5-10 pairs)
-
-- Recommended size
-- Good mix of collaboration and individual attention
-- Helps if you have a teaching assistant
-
-### Large Groups (20+ students, 10+ pairs)
-
-- Consider multiple repositories (split into groups of 12 pairs max)
-- Recruit teaching assistants to help monitor
-- Use breakout rooms (if online)
-- Automate more (less PR review, more self-merging)
-
----
-
-## Additional Resources
-
-### For You (Facilitator)
-
-- Gitea documentation: https://docs.gitea.io/
-- Pro Git book (free): https://git-scm.com/book/en/v2
-- Teaching Git: https://git-scm.com/doc
-
-### For Students
-
-- Git cheatsheet (included in workshop repo)
-- Interactive Git tutorial: https://learngitbranching.js.org/
-- Oh Shit Git: https://ohshitgit.com/ (recovering from mistakes)
-
----
-
-## Questions or Issues?
-
-This guide should cover most scenarios. If you encounter issues not listed here:
-
-1. Check Gitea logs: `docker logs gitea-container-name`
-2. Test with minimal setup (single test student)
-3. Consult Gitea documentation
-4. Reach out to workshop repository maintainers
-
-**Good luck with your workshop! The multiplayer module is where Git skills really come alive.**

01-essentials/08-multiplayer/numbers.txt

@@ -0,0 +1,11 @@
+0
+1
+2
+3
+4
+5
+6
+7
+8
+9
+10

02-advanced/01-rebasing/README.md

@@ -1,130 +0,0 @@
-# Module 07: Rebasing
-
-## Learning Objectives
-
-By the end of this module, you will:
-- Understand what rebasing is and how it works
-- Know the difference between merge and rebase
-- Perform a rebase to integrate changes from one branch to another
-- Understand when to use rebase vs merge
-- Know the golden rule of rebasing
-
-## Challenge Description
-
-You have a repository with a `main` branch and a `feature` branch. While you were working on the feature branch, new commits were added to `main`. You want to incorporate those changes into your feature branch while maintaining a clean, linear history.
-
-Your task is to:
-1. Review the current commit history
-2. Rebase the `feature` branch onto `main`
-3. Verify that the history is now linear
-
-## Key Concepts
-
-### What is Rebasing?
-
-Rebasing is the process of moving or combining a sequence of commits to a new base commit. Instead of creating a merge commit like `git merge` does, rebasing rewrites the commit history by replaying your commits on top of another branch.
-
-### Rebase vs Merge
-
-**Merge:**
-```
-    A---B---C feature
-   /         \
-  D---E---F---G main
-```
-Creates a merge commit (G) that ties the histories together.
-
-**Rebase:**
-```
-              A'--B'--C' feature
-             /
-  D---E---F main
-```
-Replays commits A, B, C on top of F, creating new commits A', B', C' with the same changes but different commit hashes.
-
-### Benefits of Rebasing
-
-- **Cleaner history**: Linear history is easier to read and understand
-- **Simpler log**: No merge commits cluttering the history
-- **Easier bisecting**: Finding bugs with `git bisect` is simpler with linear history
-
-### The Golden Rule of Rebasing
-
-**Never rebase commits that have been pushed to a public/shared repository.**
-
-Why? Because rebasing rewrites history by creating new commits. If others have based work on the original commits, rebasing will cause serious problems for collaborators.
-
-**Safe to rebase:**
-- Local commits not yet pushed
-- Feature branches you're working on alone
-- Cleaning up your work before creating a pull request
-
-**Never rebase:**
-- Commits already pushed to a shared branch (like `main` or `develop`)
-- Commits that others might have based work on
-
-## Useful Commands
-
-```bash
-# Rebase current branch onto another branch
-git rebase <branch-name>
-
-# View commit history as a graph
-git log --oneline --graph --all
-
-# If conflicts occur during rebase:
-# 1. Resolve conflicts in files
-# 2. Stage the resolved files
-git add <file>
-# 3. Continue the rebase
-git rebase --continue
-
-# Abort a rebase if something goes wrong
-git rebase --abort
-
-# Check which branch you're on
-git branch
-
-# Switch to a branch
-git switch <branch-name>
-```
-
-## Verification
-
-Run the verification script to check your solution:
-
-```bash
-.\verify.ps1
-```
-
-The verification will check that:
-- You're on the feature branch
-- The rebase was completed successfully
-- The history is linear (no merge commits)
-- All commits from both branches are present
-
-## Tips
-
-- Always check your commit graph with `git log --oneline --graph --all` before and after rebasing
-- If you encounter conflicts during rebase, resolve them just like merge conflicts
-- Use `git rebase --abort` if you want to cancel the rebase and start over
-- Rebasing rewrites history, so the commit hashes will change
-- Only rebase local commits that haven't been shared with others
-
-## When to Use Rebase vs Merge
-
-**Use Rebase when:**
-- You want a clean, linear history
-- Working on a local feature branch that hasn't been shared
-- Updating your feature branch with the latest changes from main
-- You want to clean up commits before submitting a pull request
-
-**Use Merge when:**
-- Working on a shared/public branch
-- You want to preserve the complete history including when branches diverged
-- You're merging a completed feature into main
-- You want to be safe and avoid rewriting history
-
-## What You'll Learn
-
-Rebasing is a powerful tool for maintaining a clean project history. While merging is safer and preserves exact history, rebasing creates a more readable linear timeline. Understanding both techniques and knowing when to use each is essential for effective Git workflow management.

02-advanced/01-rebasing/reset.ps1

@@ -1,22 +0,0 @@
-#!/usr/bin/env pwsh
-
-<#
-.SYNOPSIS
-    Resets the rebasing challenge environment.
-
-.DESCRIPTION
-    Removes the existing challenge directory and runs setup.ps1
-    to create a fresh challenge environment.
-#>
-
-Write-Host "Resetting challenge environment..." -ForegroundColor Yellow
-
-# Remove existing challenge directory if present
-if (Test-Path "challenge") {
-    Remove-Item -Path "challenge" -Recurse -Force
-    Write-Host "Removed existing challenge directory." -ForegroundColor Cyan
-}
-
-# Run setup script
-Write-Host "Running setup script...`n" -ForegroundColor Cyan
-& ".\setup.ps1"

02-advanced/01-rebasing/setup.ps1

@@ -1,123 +0,0 @@
-#!/usr/bin/env pwsh
-
-<#
-.SYNOPSIS
-    Sets up the rebasing challenge environment.
-
-.DESCRIPTION
-    Creates a Git repository with diverged branches to practice rebasing.
-    The feature branch needs to be rebased onto main.
-#>
-
-# Remove existing challenge directory if present
-if (Test-Path "challenge") {
-    Write-Host "Removing existing challenge directory..." -ForegroundColor Yellow
-    Remove-Item -Path "challenge" -Recurse -Force
-}
-
-# Create challenge directory
-Write-Host "Creating challenge environment..." -ForegroundColor Cyan
-New-Item -ItemType Directory -Path "challenge" | Out-Null
-Set-Location "challenge"
-
-# Initialize git repository
-git init | Out-Null
-git config user.name "Workshop User" | Out-Null
-git config user.email "user@workshop.local" | Out-Null
-
-# Create initial file and commit
-$readme = @"
-# My Project
-
-A sample project for learning Git rebasing.
-"@
-
-Set-Content -Path "README.md" -Value $readme
-git add README.md
-git commit -m "Initial commit" | Out-Null
-
-# Create and switch to feature branch
-git checkout -b feature | Out-Null
-
-# Add commits on feature branch
-$feature1 = @"
-# My Project
-
-A sample project for learning Git rebasing.
-
-## Features
-
-- Feature A: User authentication
-"@
-
-Set-Content -Path "README.md" -Value $feature1
-git add README.md
-git commit -m "Add feature A" | Out-Null
-
-$feature2 = @"
-# My Project
-
-A sample project for learning Git rebasing.
-
-## Features
-
-- Feature A: User authentication
-- Feature B: Data validation
-"@
-
-Set-Content -Path "README.md" -Value $feature2
-git add README.md
-git commit -m "Add feature B" | Out-Null
-
-# Switch back to main and add commits (simulating other work happening on main)
-git checkout main | Out-Null
-
-$main1 = @"
-# My Project
-
-A sample project for learning Git rebasing.
-
-## Installation
-
-Run \`npm install\` to install dependencies.
-"@
-
-Set-Content -Path "README.md" -Value $main1
-git add README.md
-git commit -m "Add installation instructions" | Out-Null
-
-$main2 = @"
-# My Project
-
-A sample project for learning Git rebasing.
-
-## Installation
-
-Run \`npm install\` to install dependencies.
-
-## Configuration
-
-Copy \`config.example.json\` to \`config.json\` and update settings.
-"@
-
-Set-Content -Path "README.md" -Value $main2
-git add README.md
-git commit -m "Add configuration instructions" | Out-Null
-
-# Switch back to feature branch
-git checkout feature | Out-Null
-
-# Return to module directory
-Set-Location ..
-
-Write-Host "`n========================================" -ForegroundColor Green
-Write-Host "Challenge environment created!" -ForegroundColor Green
-Write-Host "========================================" -ForegroundColor Green
-Write-Host "`nYou are now on the 'feature' branch." -ForegroundColor Cyan
-Write-Host "The 'main' branch has new commits that aren't in your feature branch." -ForegroundColor Cyan
-Write-Host "`nYour task:" -ForegroundColor Yellow
-Write-Host "1. Navigate to the challenge directory: cd challenge" -ForegroundColor White
-Write-Host "2. View the commit history: git log --oneline --graph --all" -ForegroundColor White
-Write-Host "3. Rebase the 'feature' branch onto 'main'" -ForegroundColor White
-Write-Host "4. View the history again to see the linear result" -ForegroundColor White
-Write-Host "`nRun '../verify.ps1' from the challenge directory to check your solution.`n" -ForegroundColor Cyan

02-advanced/01-rebasing/verify.ps1

@@ -1,154 +0,0 @@
-#!/usr/bin/env pwsh
-
-<#
-.SYNOPSIS
-    Verifies the rebasing challenge solution.
-
-.DESCRIPTION
-    Checks that the user successfully rebased the feature branch onto main,
-    resulting in a clean, linear history.
-#>
-
-Set-Location "challenge" -ErrorAction SilentlyContinue
-
-# Check if challenge directory exists
-if (-not (Test-Path "../verify.ps1")) {
-    Write-Host "Error: Please run this script from the module directory" -ForegroundColor Red
-    exit 1
-}
-
-if (-not (Test-Path ".")) {
-    Write-Host "Error: Challenge directory not found. Run setup.ps1 first." -ForegroundColor Red
-    Set-Location ..
-    exit 1
-}
-
-Write-Host "Verifying your solution..." -ForegroundColor Cyan
-
-# Check if git repository exists
-if (-not (Test-Path ".git")) {
-    Write-Host "[FAIL] No git repository found." -ForegroundColor Red
-    Set-Location ..
-    exit 1
-}
-
-# Check current branch
-$currentBranch = git branch --show-current 2>$null
-if ($currentBranch -ne "feature") {
-    Write-Host "[FAIL] You should be on the 'feature' branch." -ForegroundColor Red
-    Write-Host "Current branch: $currentBranch" -ForegroundColor Yellow
-    Write-Host "Hint: Use 'git checkout feature' to switch to feature branch" -ForegroundColor Yellow
-    Set-Location ..
-    exit 1
-}
-
-# Check if there's an ongoing rebase
-if (Test-Path ".git/rebase-merge") {
-    Write-Host "[FAIL] Rebase is not complete. There may be unresolved conflicts." -ForegroundColor Red
-    Write-Host "Hint: Resolve any conflicts, then use:" -ForegroundColor Yellow
-    Write-Host "  git add <file>" -ForegroundColor White
-    Write-Host "  git rebase --continue" -ForegroundColor White
-    Write-Host "Or abort with: git rebase --abort" -ForegroundColor White
-    Set-Location ..
-    exit 1
-}
-
-# Get all commits on feature branch
-$featureCommits = git log --oneline feature 2>$null
-if (-not $featureCommits) {
-    Write-Host "[FAIL] No commits found on feature branch." -ForegroundColor Red
-    Set-Location ..
-    exit 1
-}
-
-# Check commit count (should be 5: 1 initial + 2 main + 2 feature)
-$commitCount = (git rev-list --count feature 2>$null)
-if ($commitCount -ne 5) {
-    Write-Host "[FAIL] Expected 5 commits on feature branch, found $commitCount" -ForegroundColor Red
-    Write-Host "Hint: The rebased feature branch should contain:" -ForegroundColor Yellow
-    Write-Host "  - 1 initial commit" -ForegroundColor White
-    Write-Host "  - 2 commits from main" -ForegroundColor White
-    Write-Host "  - 2 commits from feature" -ForegroundColor White
-    Set-Location ..
-    exit 1
-}
-
-# Get commit messages in reverse chronological order (newest first)
-$commits = git log --pretty=format:"%s" feature 2>$null
-
-# Convert to array and reverse to get chronological order (oldest first)
-$commitArray = $commits -split "`n"
-[array]::Reverse($commitArray)
-
-# Check that commits are in the expected order after rebase
-$expectedOrder = @(
-    "Initial commit",
-    "Add installation instructions",
-    "Add configuration instructions",
-    "Add feature A",
-    "Add feature B"
-)
-
-$orderCorrect = $true
-for ($i = 0; $i -lt $expectedOrder.Length; $i++) {
-    if ($commitArray[$i] -ne $expectedOrder[$i]) {
-        $orderCorrect = $false
-        break
-    }
-}
-
-if (-not $orderCorrect) {
-    Write-Host "[FAIL] Commit order is incorrect after rebase." -ForegroundColor Red
-    Write-Host "Expected order (oldest to newest):" -ForegroundColor Yellow
-    $expectedOrder | ForEach-Object { Write-Host "  $_" -ForegroundColor White }
-    Write-Host "`nActual order:" -ForegroundColor Yellow
-    $commitArray | ForEach-Object { Write-Host "  $_" -ForegroundColor White }
-    Write-Host "`nHint: The feature commits should come AFTER the main commits" -ForegroundColor Yellow
-    Set-Location ..
-    exit 1
-}
-
-# Check that main branch still has only 3 commits (initial + 2 main commits)
-$mainCommitCount = (git rev-list --count main 2>$null)
-if ($mainCommitCount -ne 3) {
-    Write-Host "[FAIL] Main branch should have 3 commits, found $mainCommitCount" -ForegroundColor Red
-    Write-Host "Hint: You should rebase feature onto main, not the other way around" -ForegroundColor Yellow
-    Set-Location ..
-    exit 1
-}
-
-# Check that there are no merge commits (parent count should be 1 for all commits)
-$mergeCommits = git log --merges --oneline feature 2>$null
-if ($mergeCommits) {
-    Write-Host "[FAIL] Found merge commits in history. Rebasing should create a linear history." -ForegroundColor Red
-    Write-Host "Hint: Use 'git rebase main' instead of 'git merge main'" -ForegroundColor Yellow
-    Set-Location ..
-    exit 1
-}
-
-# Verify that feature branch contains all commits from main
-$mainCommits = git log --pretty=format:"%s" main 2>$null
-$featureCommitMessages = git log --pretty=format:"%s" feature 2>$null
-
-foreach ($mainCommit in ($mainCommits -split "`n")) {
-    if ($featureCommitMessages -notcontains $mainCommit) {
-        Write-Host "[FAIL] Feature branch is missing commits from main." -ForegroundColor Red
-        Write-Host "Missing: $mainCommit" -ForegroundColor Yellow
-        Set-Location ..
-        exit 1
-    }
-}
-
-# Success!
-Write-Host "`n========================================" -ForegroundColor Green
-Write-Host "SUCCESS! Challenge completed!" -ForegroundColor Green
-Write-Host "========================================" -ForegroundColor Green
-Write-Host "`nYou have successfully:" -ForegroundColor Cyan
-Write-Host "- Rebased the feature branch onto main" -ForegroundColor White
-Write-Host "- Created a clean, linear commit history" -ForegroundColor White
-Write-Host "- Preserved all commits from both branches" -ForegroundColor White
-Write-Host "`nYour feature branch now has a linear history!" -ForegroundColor Green
-Write-Host "Run 'git log --oneline --graph --all' to see the result.`n" -ForegroundColor Cyan
-
-Set-Location ..
-exit 0

02-advanced/02-interactive-rebase/README.md

@@ -1,159 +0,0 @@
-# Module 08: Interactive Rebase
-
-## Learning Objectives
-
-By the end of this module, you will:
-- Understand what interactive rebase is and when to use it
-- Learn the different interactive rebase commands (pick, reword, squash, fixup, drop)
-- Clean up commit history by squashing related commits
-- Reword commit messages to be more descriptive
-- Use reset and commit techniques to achieve similar results
-
-## Challenge Description
-
-You have a feature branch with messy commit history - multiple "WIP" commits, typos in commit messages, and commits that should be combined. Before submitting a pull request, you want to clean up this history.
-
-Your task is to:
-1. Review the current commit history with its messy commits
-2. Combine the four feature commits into a single, well-described commit
-3. Keep the initial commit unchanged
-4. End up with a clean, professional commit history
-
-## Key Concepts
-
-### What is Interactive Rebase?
-
-Interactive rebase (`git rebase -i`) is a powerful tool that lets you modify commit history. Unlike regular rebase which simply moves commits, interactive rebase lets you:
-- Reorder commits
-- Edit commit messages (reword)
-- Combine multiple commits (squash/fixup)
-- Split commits into smaller ones
-- Delete commits entirely
-- Edit the contents of commits
-
-### Interactive Rebase Commands
-
-When you run `git rebase -i HEAD~3`, Git opens an editor with a list of commits and commands:
-
-```
-pick abc1234 First commit
-pick def5678 Second commit
-pick ghi9012 Third commit
-```
-
-You can change `pick` to other commands:
-
-- **pick**: Keep the commit as-is
-- **reword**: Keep the commit but edit its message
-- **edit**: Pause the rebase to amend the commit
-- **squash**: Combine this commit with the previous one, keeping both messages
-- **fixup**: Like squash, but discard this commit's message
-- **drop**: Remove the commit entirely
-
-### When to Use Interactive Rebase
-
-Interactive rebase is perfect for:
-- Cleaning up work-in-progress commits before creating a pull request
-- Fixing typos in commit messages
-- Combining related commits into logical units
-- Removing debug commits or experimental code
-- Creating a clean, professional history
-
-**Remember**: Only rebase commits that haven't been pushed to a shared branch!
-
-## Alternative Approach: Reset and Recommit
-
-Since interactive rebase requires an interactive editor, this challenge uses an alternative approach that achieves the same result:
-
-1. **Reset soft**: Move HEAD back while keeping changes staged
-   ```bash
-   git reset --soft HEAD~4
-   ```
-   This keeps all changes from the last 4 commits but "uncommits" them.
-
-2. **Create a new commit**: Commit all changes with a clean message
-   ```bash
-   git commit -m "Your new clean commit message"
-   ```
-
-This technique is useful when you want to combine multiple commits into one without using interactive rebase.
-
-## Useful Commands
-
-```bash
-# View commit history
-git log --oneline
-
-# See the last N commits in detail
-git log -n 5
-
-# Reset to N commits back, keeping changes staged
-git reset --soft HEAD~N
-
-# Reset to N commits back, keeping changes unstaged
-git reset --mixed HEAD~N
-
-# Reset to N commits back, discarding all changes (DANGEROUS!)
-git reset --hard HEAD~N
-
-# Create a new commit
-git commit -m "message"
-
-# Amend the last commit
-git commit --amend -m "new message"
-
-# Interactive rebase (requires interactive editor)
-git rebase -i HEAD~N
-
-# Check current status
-git status
-```
-
-## Verification
-
-Run the verification script to check your solution:
-
-```bash
-.\verify.ps1
-```
-
-The verification will check that:
-- You have exactly 2 commits total (initial + your combined feature commit)
-- The feature commit contains all the changes from the original 4 feature commits
-- The commit message is clean and descriptive
-- All expected files are present
-
-## Challenge Steps
-
-1. Navigate to the challenge directory
-2. View the current messy commit history: `git log --oneline`
-3. Use `git reset --soft HEAD~4` to uncommit the last 4 commits while keeping changes
-4. Check status with `git status` - you should see all changes staged
-5. Create a new commit with a clean message: `git commit -m "Add user profile feature with validation"`
-6. Verify with `git log --oneline` - you should now have clean history
-7. Run the verification script
-
-## Tips
-
-- Always check your history with `git log --oneline` before and after
-- `git reset --soft` is safer than `--hard` because it keeps your changes
-- You can use `git reset --soft HEAD~N` where N is the number of commits to undo
-- If you make a mistake, run `.\reset.ps1` to start over
-- In real projects with interactive rebase, you would use `git rebase -i HEAD~N` and modify the commit list in the editor
-
-## What is Git Reset?
-
-`git reset` moves the current branch pointer to a different commit:
-
-- **--soft**: Moves HEAD but keeps changes staged
-- **--mixed** (default): Moves HEAD and unstages changes, but keeps them in working directory
-- **--hard**: Moves HEAD and discards all changes (dangerous!)
-
-Reset is useful for:
-- Undoing commits while keeping changes (`--soft`)
-- Unstaging files (`--mixed`)
-- Discarding commits entirely (`--hard`)
-
-## What You'll Learn
-
-Cleaning up commit history is an important skill for professional development. Whether you use interactive rebase or reset-and-recommit, the goal is the same: create a clear, logical history that makes your code review easier and your project history more understandable. Messy WIP commits are fine during development, but cleaning them up before merging shows attention to detail and makes your codebase more maintainable.

02-advanced/02-interactive-rebase/reset.ps1

@@ -1,22 +0,0 @@
-#!/usr/bin/env pwsh
-
-<#
-.SYNOPSIS
-    Resets the interactive rebase challenge environment.
-
-.DESCRIPTION
-    Removes the existing challenge directory and runs setup.ps1
-    to create a fresh challenge environment.
-#>
-
-Write-Host "Resetting challenge environment..." -ForegroundColor Yellow
-
-# Remove existing challenge directory if present
-if (Test-Path "challenge") {
-    Remove-Item -Path "challenge" -Recurse -Force
-    Write-Host "Removed existing challenge directory." -ForegroundColor Cyan
-}
-
-# Run setup script
-Write-Host "Running setup script...`n" -ForegroundColor Cyan
-& ".\setup.ps1"

02-advanced/02-interactive-rebase/setup.ps1

@@ -1,133 +0,0 @@
-#!/usr/bin/env pwsh
-
-<#
-.SYNOPSIS
-    Sets up the interactive rebase challenge environment.
-
-.DESCRIPTION
-    Creates a Git repository with messy commit history that needs to be
-    cleaned up using reset and recommit techniques.
-#>
-
-# Remove existing challenge directory if present
-if (Test-Path "challenge") {
-    Write-Host "Removing existing challenge directory..." -ForegroundColor Yellow
-    Remove-Item -Path "challenge" -Recurse -Force
-}
-
-# Create challenge directory
-Write-Host "Creating challenge environment..." -ForegroundColor Cyan
-New-Item -ItemType Directory -Path "challenge" | Out-Null
-Set-Location "challenge"
-
-# Initialize git repository
-git init | Out-Null
-git config user.name "Workshop User" | Out-Null
-git config user.email "user@workshop.local" | Out-Null
-
-# Create initial commit
-$readme = @"
-# User Management System
-
-A simple user management application.
-"@
-
-Set-Content -Path "README.md" -Value $readme
-git add README.md
-git commit -m "Initial commit" | Out-Null
-
-# Create messy commits that should be squashed
-
-# Commit 1: WIP user profile
-$userProfile = @"
-class UserProfile:
-    def __init__(self, name, email):
-        self.name = name
-        self.email = email
-"@
-
-Set-Content -Path "user_profile.py" -Value $userProfile
-git add user_profile.py
-git commit -m "WIP: user profile" | Out-Null
-
-# Commit 2: Add validation (typo in message)
-$userProfileWithValidation = @"
-class UserProfile:
-    def __init__(self, name, email):
-        self.name = name
-        self.email = email
-
-    def validate(self):
-        if not self.name or not self.email:
-            raise ValueError('Name and email are required')
-        return True
-"@
-
-Set-Content -Path "user_profile.py" -Value $userProfileWithValidation
-git add user_profile.py
-git commit -m "add validaton" | Out-Null  # Intentional typo
-
-# Commit 3: Fix validation
-$userProfileFixed = @"
-class UserProfile:
-    def __init__(self, name, email):
-        self.name = name
-        self.email = email
-
-    def validate(self):
-        if not self.name or not self.email:
-            raise ValueError('Name and email are required')
-        if '@' not in self.email:
-            raise ValueError('Invalid email format')
-        return True
-"@
-
-Set-Content -Path "user_profile.py" -Value $userProfileFixed
-git add user_profile.py
-git commit -m "fix validation bug" | Out-Null
-
-# Commit 4: Add tests (another WIP commit)
-$tests = @"
-import unittest
-from user_profile import UserProfile
-
-class TestUserProfile(unittest.TestCase):
-    def test_validate_correct_user_data(self):
-        user = UserProfile('John', 'john@example.com')
-        self.assertTrue(user.validate())
-
-    def test_reject_missing_name(self):
-        user = UserProfile('', 'john@example.com')
-        with self.assertRaises(ValueError):
-            user.validate()
-
-    def test_reject_invalid_email(self):
-        user = UserProfile('John', 'invalid-email')
-        with self.assertRaises(ValueError):
-            user.validate()
-
-if __name__ == '__main__':
-    unittest.main()
-"@
-
-Set-Content -Path "test_user_profile.py" -Value $tests
-git add test_user_profile.py
-git commit -m "WIP tests" | Out-Null
-
-# Return to module directory
-Set-Location ..
-
-Write-Host "`n========================================" -ForegroundColor Green
-Write-Host "Challenge environment created!" -ForegroundColor Green
-Write-Host "========================================" -ForegroundColor Green
-Write-Host "`nYou have a repository with messy commit history:" -ForegroundColor Cyan
-Write-Host "- WIP commits" -ForegroundColor Yellow
-Write-Host "- Typos in commit messages" -ForegroundColor Yellow
-Write-Host "- Multiple commits that should be combined" -ForegroundColor Yellow
-Write-Host "`nYour task:" -ForegroundColor Yellow
-Write-Host "1. Navigate to the challenge directory: cd challenge" -ForegroundColor White
-Write-Host "2. View the messy history: git log --oneline" -ForegroundColor White
-Write-Host "3. Use 'git reset --soft HEAD~4' to uncommit the last 4 commits" -ForegroundColor White
-Write-Host "4. Create a single clean commit with a descriptive message" -ForegroundColor White
-Write-Host "   Example: git commit -m 'Add user profile feature with validation'" -ForegroundColor White
-Write-Host "`nRun '../verify.ps1' from the challenge directory to check your solution.`n" -ForegroundColor Cyan

02-advanced/02-interactive-rebase/verify.ps1

@@ -1,172 +0,0 @@
-#!/usr/bin/env pwsh
-
-<#
-.SYNOPSIS
-    Verifies the interactive rebase challenge solution.
-
-.DESCRIPTION
-    Checks that the user successfully cleaned up the commit history
-    by combining multiple messy commits into a single clean commit.
-#>
-
-Set-Location "challenge" -ErrorAction SilentlyContinue
-
-# Check if challenge directory exists
-if (-not (Test-Path "../verify.ps1")) {
-    Write-Host "Error: Please run this script from the module directory" -ForegroundColor Red
-    exit 1
-}
-
-if (-not (Test-Path ".")) {
-    Write-Host "Error: Challenge directory not found. Run setup.ps1 first." -ForegroundColor Red
-    Set-Location ..
-    exit 1
-}
-
-Write-Host "Verifying your solution..." -ForegroundColor Cyan
-
-# Check if git repository exists
-if (-not (Test-Path ".git")) {
-    Write-Host "[FAIL] No git repository found." -ForegroundColor Red
-    Set-Location ..
-    exit 1
-}
-
-# Check commit count (should be exactly 2: initial + combined feature commit)
-$commitCount = (git rev-list --count HEAD 2>$null)
-if ($commitCount -ne 2) {
-    Write-Host "[FAIL] Expected exactly 2 commits, found $commitCount" -ForegroundColor Red
-    if ($commitCount -gt 2) {
-        Write-Host "Hint: You have too many commits. Use 'git reset --soft HEAD~N' to combine them." -ForegroundColor Yellow
-        Write-Host "      Where N is the number of commits to undo (should be 4 in this case)." -ForegroundColor Yellow
-    } else {
-        Write-Host "Hint: You may have reset too far back. Run ../reset.ps1 to start over." -ForegroundColor Yellow
-    }
-    Set-Location ..
-    exit 1
-}
-
-# Get commit messages
-$commits = git log --pretty=format:"%s" 2>$null
-$commitArray = $commits -split "`n"
-
-# Check that first commit is still the initial commit
-if ($commitArray[1] -ne "Initial commit") {
-    Write-Host "[FAIL] The initial commit should remain unchanged." -ForegroundColor Red
-    Write-Host "Expected first commit: 'Initial commit'" -ForegroundColor Yellow
-    Write-Host "Found: '$($commitArray[1])'" -ForegroundColor Yellow
-    Set-Location ..
-    exit 1
-}
-
-# Check that the second commit message is clean (not WIP, not with typos)
-$featureCommit = $commitArray[0]
-if ($featureCommit -match "WIP|wip") {
-    Write-Host "[FAIL] Commit message still contains 'WIP'." -ForegroundColor Red
-    Write-Host "Current message: '$featureCommit'" -ForegroundColor Yellow
-    Write-Host "Hint: Create a clean, descriptive commit message." -ForegroundColor Yellow
-    Set-Location ..
-    exit 1
-}
-
-if ($featureCommit -match "validaton") {
-    Write-Host "[FAIL] Commit message contains a typo ('validaton')." -ForegroundColor Red
-    Write-Host "Current message: '$featureCommit'" -ForegroundColor Yellow
-    Write-Host "Hint: Use a properly spelled commit message." -ForegroundColor Yellow
-    Set-Location ..
-    exit 1
-}
-
-# Check that commit message is not empty and has reasonable length
-if ($featureCommit.Length -lt 10) {
-    Write-Host "[FAIL] Commit message is too short. Be more descriptive." -ForegroundColor Red
-    Write-Host "Current message: '$featureCommit'" -ForegroundColor Yellow
-    Set-Location ..
-    exit 1
-}
-
-# Check that required files exist
-if (-not (Test-Path "user_profile.py")) {
-    Write-Host "[FAIL] user_profile.py not found." -ForegroundColor Red
-    Set-Location ..
-    exit 1
-}
-
-if (-not (Test-Path "test_user_profile.py")) {
-    Write-Host "[FAIL] test_user_profile.py not found." -ForegroundColor Red
-    Set-Location ..
-    exit 1
-}
-
-# Check that user_profile.py contains all expected features
-$userProfileContent = Get-Content "user_profile.py" -Raw
-
-# Should have the class
-if ($userProfileContent -notmatch "class UserProfile") {
-    Write-Host "[FAIL] user_profile.py should contain UserProfile class." -ForegroundColor Red
-    Set-Location ..
-    exit 1
-}
-
-# Should have validation method
-if ($userProfileContent -notmatch "def validate\(") {
-    Write-Host "[FAIL] user_profile.py should contain validate() method." -ForegroundColor Red
-    Set-Location ..
-    exit 1
-}
-
-# Should have email format validation (the final fix from commit 3)
-if ($userProfileContent -notmatch "'@'.*in.*email|email.*in.*'@'") {
-    Write-Host "[FAIL] user_profile.py should contain email format validation." -ForegroundColor Red
-    Write-Host "Hint: Make sure all changes from all 4 commits are included." -ForegroundColor Yellow
-    Set-Location ..
-    exit 1
-}
-
-# Check that test file has content
-$testContent = Get-Content "test_user_profile.py" -Raw
-
-if ($testContent -notmatch "class.*TestUserProfile") {
-    Write-Host "[FAIL] test_user_profile.py should contain TestUserProfile tests." -ForegroundColor Red
-    Set-Location ..
-    exit 1
-}
-
-# Check that we have at least 3 test cases
-$testMatches = ([regex]::Matches($testContent, "def test_")).Count
-if ($testMatches -lt 3) {
-    Write-Host "[FAIL] test_user_profile.py should contain at least 3 test cases." -ForegroundColor Red
-    Set-Location ..
-    exit 1
-}
-
-# Verify that the latest commit contains changes to both files
-$filesInLastCommit = git diff-tree --no-commit-id --name-only -r HEAD 2>$null
-if ($filesInLastCommit -notcontains "user_profile.py") {
-    Write-Host "[FAIL] The feature commit should include user_profile.py" -ForegroundColor Red
-    Set-Location ..
-    exit 1
-}
-
-if ($filesInLastCommit -notcontains "test_user_profile.py") {
-    Write-Host "[FAIL] The feature commit should include test_user_profile.py" -ForegroundColor Red
-    Set-Location ..
-    exit 1
-}
-
-# Success!
-Write-Host "`n========================================" -ForegroundColor Green
-Write-Host "SUCCESS! Challenge completed!" -ForegroundColor Green
-Write-Host "========================================" -ForegroundColor Green
-Write-Host "`nYou have successfully:" -ForegroundColor Cyan
-Write-Host "- Combined 4 messy commits into 1 clean commit" -ForegroundColor White
-Write-Host "- Created a descriptive commit message" -ForegroundColor White
-Write-Host "- Preserved all code changes" -ForegroundColor White
-Write-Host "- Cleaned up the commit history" -ForegroundColor White
-Write-Host "`nYour commit history is now clean and professional!" -ForegroundColor Green
-Write-Host "Run 'git log --oneline' to see the result.`n" -ForegroundColor Cyan
-Write-Host "Key takeaway: Clean commit history makes code review easier" -ForegroundColor Yellow
-Write-Host "and your project more maintainable.`n" -ForegroundColor Yellow
-
-Set-Location ..
-exit 0

02-advanced/03-worktrees/README.md

@@ -1,208 +0,0 @@
-# Module 13: Worktrees
-
-## Learning Objectives
-
-By the end of this module, you will:
-- Understand what Git worktrees are and when to use them
-- Create and manage multiple working directories for the same repository
-- Work on multiple branches simultaneously
-- Understand the benefits of worktrees over stashing or cloning
-- Remove and clean up worktrees
-
-## Challenge Description
-
-You're working on a feature when an urgent bug report comes in. Instead of stashing your work or creating a separate clone, you'll use Git worktrees to work on both the feature and the bugfix simultaneously in different directories.
-
-Your task is to:
-1. Create a worktree for the bugfix on a separate branch
-2. Fix the bug in the worktree
-3. Commit and verify the fix
-4. Continue working on your feature in the main working directory
-5. Clean up the worktree when done
-
-## Key Concepts
-
-### What are Git Worktrees?
-
-A worktree is an additional working directory attached to the same repository. Each worktree can have a different branch checked out, allowing you to work on multiple branches simultaneously without switching.
-
-### Traditional Workflow vs Worktrees
-
-**Traditional (switching branches):**
-```
-main-repo/
-  - Switch to bugfix branch
-  - Fix bug
-  - Switch back to feature branch
-  - Continue feature work
-  - (Requires stashing or committing incomplete work)
-```
-
-**With Worktrees:**
-```
-main-repo/           <- feature branch
-worktrees/bugfix/    <- bugfix branch
-
-Work in both simultaneously!
-```
-
-### Why Use Worktrees?
-
-**Advantages:**
-- Work on multiple branches at the same time
-- No need to stash or commit incomplete work
-- Each worktree has its own working directory and index
-- Share the same Git history (one `.git` directory)
-- Faster than cloning the entire repository
-- Perfect for code reviews, comparisons, or parallel development
-
-**Use Cases:**
-- Urgent bug fixes while working on a feature
-- Code reviews (checkout PR in separate worktree)
-- Comparing implementations side by side
-- Running tests on one branch while coding on another
-- Building different versions simultaneously
-
-## Useful Commands
-
-```bash
-# List all worktrees
-git worktree list
-
-# Add a new worktree
-git worktree add <path> <branch>
-git worktree add ../bugfix bugfix-branch
-
-# Create new branch in worktree
-git worktree add <path> -b <new-branch>
-git worktree add ../feature-new -b feature-new
-
-# Remove a worktree
-git worktree remove <path>
-git worktree remove ../bugfix
-
-# Prune stale worktree information
-git worktree prune
-
-# Move a worktree
-git worktree move <old-path> <new-path>
-
-# Lock a worktree (prevent deletion)
-git worktree lock <path>
-git worktree unlock <path>
-```
-
-## Verification
-
-Run the verification script to check your solution:
-
-```bash
-.\verify.ps1
-```
-
-The verification will check that:
-- You created a worktree for the bugfix
-- The bug was fixed and committed in the worktree
-- Your feature work continued in the main directory
-- Both branches have the expected changes
-
-## Challenge Steps
-
-1. Navigate to the challenge directory
-2. You're in main-repo with a feature branch checked out
-3. View current worktrees: `git worktree list`
-4. Create a worktree for bugfix: `git worktree add ../bugfix-worktree -b bugfix`
-5. Navigate to the worktree: `cd ../bugfix-worktree`
-6. Fix the bug in calculator.js (fix the divide by zero check)
-7. Commit the fix: `git add . && git commit -m "Fix divide by zero bug"`
-8. Go back to main repo: `cd ../main-repo`
-9. Continue working on your feature
-10. Add a new method to calculator.js
-11. Commit your feature
-12. List worktrees: `git worktree list`
-13. Remove the worktree: `git worktree remove ../bugfix-worktree`
-14. Run verification
-
-## Tips
-
-- Worktree paths are typically siblings of your main repo (use `../worktree-name`)
-- Each worktree must have a different branch checked out
-- Can't checkout the same branch in multiple worktrees
-- The main `.git` directory is shared, so commits in any worktree are visible everywhere
-- Worktrees are listed in `.git/worktrees/`
-- Use `git worktree remove` to clean up, or just delete the directory and run `git worktree prune`
-- Worktrees persist across restarts until explicitly removed
-
-## Common Worktree Workflows
-
-### Urgent Bugfix
-```bash
-# Currently on feature branch with uncommitted changes
-git worktree add ../hotfix -b hotfix
-
-cd ../hotfix
-# Fix the bug
-git add .
-git commit -m "Fix critical bug"
-git push origin hotfix
-
-cd ../main-repo
-# Continue working on feature
-```
-
-### Code Review
-```bash
-# Review a pull request without switching branches
-git fetch origin pull/123/head:pr-123
-git worktree add ../review-pr-123 pr-123
-
-cd ../review-pr-123
-# Review code, test it
-# Run: npm test, npm start, etc.
-
-cd ../main-repo
-git worktree remove ../review-pr-123
-```
-
-### Parallel Development
-```bash
-# Work on two features simultaneously
-git worktree add ../feature-a -b feature-a
-git worktree add ../feature-b -b feature-b
-
-# Terminal 1
-cd feature-a && code .
-
-# Terminal 2
-cd feature-b && code .
-```
-
-### Build Comparison
-```bash
-# Compare builds between branches
-git worktree add ../release-build release-v2.0
-
-cd ../release-build
-npm run build
-# Test production build
-
-# Meanwhile, continue development in main repo
-```
-
-## Worktree vs Other Approaches
-
-### vs Stashing
-- **Stash**: Temporary, one at a time, requires branch switching
-- **Worktree**: Persistent, multiple simultaneously, no switching
-
-### vs Cloning
-- **Clone**: Full copy, separate `.git`, uses more disk space
-- **Worktree**: Shared `.git`, less disk space, instant sync
-
-### vs Branch Switching
-- **Switching**: Requires clean working directory, one branch at a time
-- **Worktree**: Keep dirty working directory, multiple branches active
-
-## What You'll Learn
-
-Git worktrees are a powerful but underutilized feature that can significantly improve your workflow. They eliminate the need for constant branch switching, stashing, or maintaining multiple clones. Whether you're handling urgent fixes, reviewing code, or comparing implementations, worktrees provide a clean and efficient solution. Once you understand worktrees, you'll find many situations where they're the perfect tool for the job.

02-advanced/03-worktrees/reset.ps1

@@ -1,22 +0,0 @@
-#!/usr/bin/env pwsh
-
-<#
-.SYNOPSIS
-    Resets the worktrees challenge environment.
-
-.DESCRIPTION
-    Removes the existing challenge directory and runs setup.ps1
-    to create a fresh challenge environment.
-#>
-
-Write-Host "Resetting challenge environment..." -ForegroundColor Yellow
-
-# Remove existing challenge directory if present
-if (Test-Path "challenge") {
-    Remove-Item -Path "challenge" -Recurse -Force
-    Write-Host "Removed existing challenge directory." -ForegroundColor Cyan
-}
-
-# Run setup script
-Write-Host "Running setup script...`n" -ForegroundColor Cyan
-& ".\setup.ps1"

02-advanced/03-worktrees/setup.ps1

@@ -1,123 +0,0 @@
-#!/usr/bin/env pwsh
-
-<#
-.SYNOPSIS
-    Sets up the worktrees challenge environment.
-
-.DESCRIPTION
-    Creates a Git repository with a feature in progress, ready for
-    demonstrating the use of worktrees for parallel work.
-#>
-
-# Remove existing challenge directory if present
-if (Test-Path "challenge") {
-    Write-Host "Removing existing challenge directory..." -ForegroundColor Yellow
-    Remove-Item -Path "challenge" -Recurse -Force
-}
-
-# Create challenge directory
-Write-Host "Creating challenge environment..." -ForegroundColor Cyan
-New-Item -ItemType Directory -Path "challenge" | Out-Null
-Set-Location "challenge"
-
-# Create main repository
-New-Item -ItemType Directory -Path "main-repo" | Out-Null
-Set-Location "main-repo"
-
-# Initialize git repository
-git init | Out-Null
-git config user.name "Workshop User" | Out-Null
-git config user.email "user@workshop.local" | Out-Null
-
-# Create initial calculator with a bug
-$calculator = @"
-class Calculator:
-    def add(self, a, b):
-        return a + b
-
-    def subtract(self, a, b):
-        return a - b
-
-    def multiply(self, a, b):
-        return a * b
-
-    # BUG: No division by zero check!
-    def divide(self, a, b):
-        return a / b
-"@
-
-Set-Content -Path "calculator.py" -Value $calculator
-git add calculator.py
-git commit -m "Initial calculator implementation" | Out-Null
-
-$readme = @"
-# Calculator Project
-
-A simple calculator with basic operations.
-
-## Features
-- Addition
-- Subtraction
-- Multiplication
-- Division (has a bug!)
-"@
-
-Set-Content -Path "README.md" -Value $readme
-git add README.md
-git commit -m "Add README" | Out-Null
-
-# Create feature branch and start working on it
-git checkout -b feature-advanced-math | Out-Null
-
-# Add work in progress on feature branch
-$calculatorWithFeature = @"
-class Calculator:
-    def add(self, a, b):
-        return a + b
-
-    def subtract(self, a, b):
-        return a - b
-
-    def multiply(self, a, b):
-        return a * b
-
-    # BUG: No division by zero check!
-    def divide(self, a, b):
-        return a / b
-
-    # New feature: power function (work in progress)
-    def power(self, a, b):
-        return a ** b
-
-    # TODO: Add square root function
-    # TODO: Add logarithm function
-"@
-
-Set-Content -Path "calculator.py" -Value $calculatorWithFeature
-git add calculator.py
-git commit -m "Add power function (WIP: more math functions coming)" | Out-Null
-
-# Return to challenge directory
-Set-Location ..
-
-Write-Host "`n========================================" -ForegroundColor Green
-Write-Host "Challenge environment created!" -ForegroundColor Green
-Write-Host "========================================" -ForegroundColor Green
-Write-Host "`nSituation:" -ForegroundColor Cyan
-Write-Host "You're working on the 'feature-advanced-math' branch" -ForegroundColor White
-Write-Host "You have plans to add more math functions (see TODOs)" -ForegroundColor White
-Write-Host "`nUrgent: A critical bug was discovered in the divide function!" -ForegroundColor Red
-Write-Host "It doesn't check for division by zero." -ForegroundColor Red
-Write-Host "`nInstead of stashing your feature work, use a worktree:" -ForegroundColor Yellow
-Write-Host "`nYour task:" -ForegroundColor Yellow
-Write-Host "1. Navigate to main-repo: cd challenge/main-repo" -ForegroundColor White
-Write-Host "2. Create a worktree: git worktree add ../bugfix-worktree -b bugfix" -ForegroundColor White
-Write-Host "3. Go to worktree: cd ../bugfix-worktree" -ForegroundColor White
-Write-Host "4. Fix the bug in calculator.py:" -ForegroundColor White
-Write-Host "   Add a check: if (b === 0) throw new Error('Division by zero');" -ForegroundColor White
-Write-Host "5. Commit the fix: git add . && git commit -m 'Fix divide by zero bug'" -ForegroundColor White
-Write-Host "6. Return to main-repo: cd ../main-repo" -ForegroundColor White
-Write-Host "7. Complete your feature: Add square root method to calculator.py" -ForegroundColor White
-Write-Host "8. Commit: git add . && git commit -m 'Add square root function'" -ForegroundColor White
-Write-Host "9. Clean up worktree: git worktree remove ../bugfix-worktree" -ForegroundColor White
-Write-Host "`nRun '../verify.ps1' from the challenge directory to check your solution.`n" -ForegroundColor Cyan

02-advanced/03-worktrees/verify.ps1

@@ -1,165 +0,0 @@
-#!/usr/bin/env pwsh
-
-<#
-.SYNOPSIS
-    Verifies the worktrees challenge solution.
-
-.DESCRIPTION
-    Checks that the user successfully used worktrees to fix a bug
-    while continuing work on a feature.
-#>
-
-Set-Location "challenge" -ErrorAction SilentlyContinue
-
-# Check if challenge directory exists
-if (-not (Test-Path "../verify.ps1")) {
-    Write-Host "Error: Please run this script from the module directory" -ForegroundColor Red
-    exit 1
-}
-
-if (-not (Test-Path ".")) {
-    Write-Host "Error: Challenge directory not found. Run setup.ps1 first." -ForegroundColor Red
-    Set-Location ..
-    exit 1
-}
-
-Write-Host "Verifying your solution..." -ForegroundColor Cyan
-
-# Check if main-repo exists
-if (-not (Test-Path "main-repo")) {
-    Write-Host "[FAIL] main-repo directory not found." -ForegroundColor Red
-    Set-Location ..
-    exit 1
-}
-
-Set-Location "main-repo"
-
-# Check if it's a git repository
-if (-not (Test-Path ".git")) {
-    Write-Host "[FAIL] main-repo is not a git repository." -ForegroundColor Red
-    Set-Location ../..
-    exit 1
-}
-
-# Check if bugfix branch exists
-$branches = git branch --all 2>$null
-if ($branches -notmatch "bugfix") {
-    Write-Host "[FAIL] bugfix branch not found." -ForegroundColor Red
-    Write-Host "Hint: Create a worktree with: git worktree add ../bugfix-worktree -b bugfix" -ForegroundColor Yellow
-    Set-Location ../..
-    exit 1
-}
-
-Write-Host "[PASS] Bugfix branch exists!" -ForegroundColor Green
-
-# Check bugfix branch for the fix
-git checkout bugfix 2>$null | Out-Null
-
-if (-not (Test-Path "calculator.py")) {
-    Write-Host "[FAIL] calculator.py not found on bugfix branch." -ForegroundColor Red
-    Set-Location ../..
-    exit 1
-}
-
-$bugfixCalc = Get-Content "calculator.py" -Raw
-
-# Check if division by zero check was added
-if ($bugfixCalc -notmatch "b === 0|b == 0|division by zero|divide by zero") {
-    Write-Host "[FAIL] Division by zero check not found in bugfix branch." -ForegroundColor Red
-    Write-Host "Hint: Add a check in the divide method to prevent division by zero" -ForegroundColor Yellow
-    Set-Location ../..
-    exit 1
-}
-
-# Check for commit on bugfix branch
-$bugfixCommits = git log --pretty=format:"%s" bugfix 2>$null
-if ($bugfixCommits -notmatch "bug|fix|division|divide") {
-    Write-Host "[FAIL] No bugfix commit found on bugfix branch." -ForegroundColor Red
-    Write-Host "Hint: Commit your fix with a descriptive message" -ForegroundColor Yellow
-    Set-Location ../..
-    exit 1
-}
-
-Write-Host "[PASS] Bug fixed on bugfix branch!" -ForegroundColor Green
-
-# Check feature branch for continued work
-git checkout feature-advanced-math 2>$null | Out-Null
-
-$featureCalc = Get-Content "calculator.py" -Raw
-
-# Check if square root function was added
-if ($featureCalc -notmatch "sqrt|squareRoot") {
-    Write-Host "[FAIL] Square root function not found on feature branch." -ForegroundColor Red
-    Write-Host "Hint: Add the square root method to calculator.py on feature-advanced-math branch" -ForegroundColor Yellow
-    Set-Location ../..
-    exit 1
-}
-
-# Check that feature work was committed
-$featureCommits = git log --pretty=format:"%s" feature-advanced-math 2>$null
-$featureCommitArray = $featureCommits -split "`n"
-
-# Should have at least 3 commits: initial + README + power + sqrt
-if ($featureCommitArray.Count -lt 4) {
-    Write-Host "[FAIL] Not enough commits on feature branch." -ForegroundColor Red
-    Write-Host "Expected: initial, README, power, and square root commits" -ForegroundColor Yellow
-    Write-Host "Found $($featureCommitArray.Count) commits" -ForegroundColor Yellow
-    Set-Location ../..
-    exit 1
-}
-
-# Check if the latest feature commit is about square root
-if ($featureCommitArray[0] -notmatch "sqrt|square|root") {
-    Write-Host "[FAIL] Latest commit on feature branch should be about square root." -ForegroundColor Red
-    Write-Host "Latest commit: $($featureCommitArray[0])" -ForegroundColor Yellow
-    Set-Location ../..
-    exit 1
-}
-
-Write-Host "[PASS] Feature work completed!" -ForegroundColor Green
-
-# Check if worktree was cleaned up (bugfix-worktree should not exist or be removed)
-Set-Location ..
-$worktreeStillExists = Test-Path "bugfix-worktree"
-
-if ($worktreeStillExists) {
-    Write-Host "[WARNING] bugfix-worktree directory still exists." -ForegroundColor Yellow
-    Write-Host "Hint: Clean up with: git worktree remove ../bugfix-worktree" -ForegroundColor Yellow
-    # Don't fail on this, just warn
-}
-
-# Check worktree list
-Set-Location "main-repo"
-$worktrees = git worktree list 2>$null
-
-# Verify that the concept was understood (they should have created the worktree at some point)
-# We can check this by looking for the bugfix branch existence
-if ($branches -notmatch "bugfix") {
-    Write-Host "[FAIL] No evidence of worktree usage." -ForegroundColor Red
-    Set-Location ../..
-    exit 1
-}
-
-# Success!
-Write-Host "`n========================================" -ForegroundColor Green
-Write-Host "SUCCESS! Challenge completed!" -ForegroundColor Green
-Write-Host "========================================" -ForegroundColor Green
-Write-Host "`nYou have successfully:" -ForegroundColor Cyan
-Write-Host "- Created a worktree for the bugfix" -ForegroundColor White
-Write-Host "- Fixed the division by zero bug" -ForegroundColor White
-Write-Host "- Committed the fix on the bugfix branch" -ForegroundColor White
-Write-Host "- Continued feature work in parallel" -ForegroundColor White
-Write-Host "- Added the square root function" -ForegroundColor White
-Write-Host "- Committed the feature work" -ForegroundColor White
-
-if (-not $worktreeStillExists) {
-    Write-Host "- Cleaned up the worktree" -ForegroundColor White
-}
-
-Write-Host "`nYou now understand Git worktrees!" -ForegroundColor Green
-Write-Host "`nKey takeaway:" -ForegroundColor Yellow
-Write-Host "Worktrees let you work on multiple branches simultaneously" -ForegroundColor White
-Write-Host "without stashing, switching, or cloning the repository.`n" -ForegroundColor White
-
-Set-Location ../..
-exit 0

02-advanced/04-bisect/README.md

@@ -1,237 +0,0 @@
-# Module 14: Bisect - Finding Bugs with Binary Search
-
-## Learning Objectives
-
-By the end of this module, you will:
-- Understand what git bisect is and when to use it
-- Use binary search to find the commit that introduced a bug
-- Mark commits as good or bad during bisection
-- Automate bisect with test scripts
-- Understand the efficiency of binary search for debugging
-
-## Challenge Description
-
-A bug has appeared in your calculator application, but you don't know which commit introduced it. The project has many commits, and manually checking each one would take too long. You'll use `git bisect` to efficiently find the culprit commit using binary search.
-
-Your task is to:
-1. Start a bisect session
-2. Mark the current commit as bad (bug exists)
-3. Mark an old commit as good (bug didn't exist)
-4. Test commits and mark them good or bad
-5. Let Git find the first bad commit
-6. Identify what change introduced the bug
-
-## Key Concepts
-
-### What is Git Bisect?
-
-Git bisect uses binary search to find the commit that introduced a bug. Instead of checking every commit linearly, it cuts the search space in half with each test, making it extremely efficient.
-
-### Binary Search Efficiency
-
-**Linear Search (manual checking):**
-- 100 commits = up to 100 tests
-- 1000 commits = up to 1000 tests
-
-**Binary Search (bisect):**
-- 100 commits = ~7 tests
-- 1000 commits = ~10 tests
-
-Formula: log₂(n) tests needed for n commits
-
-### How Bisect Works
-
-```
-Commits:  A---B---C---D---E---F---G---H
-          ✓   ✓   ✓   ?   ?   ?   ?   ✗
-
-1. Start: Mark H (bad) and A (good)
-2. Git checks middle: E
-3. You test E: bad ✗
-
-Commits:  A---B---C---D---E
-          ✓   ✓   ✓   ?   ✗
-
-4. Git checks middle: C
-5. You test C: good ✓
-
-Commits:  C---D---E
-          ✓   ?   ✗
-
-6. Git checks: D
-7. You test D: bad ✗
-
-Result: D is the first bad commit!
-```
-
-### When to Use Bisect
-
-Use bisect when:
-- You know a bug exists now but didn't exist in the past
-- You have many commits to check
-- You can reliably test for the bug
-- You want to find exactly when something broke
-
-## Useful Commands
-
-```powershell
-# Start bisect session
-git bisect start
-
-# Mark current commit as bad
-git bisect bad
-
-# Mark a commit as good
-git bisect good <commit-hash>
-git bisect good HEAD~10
-
-# After testing current commit
-git bisect good  # This commit is fine
-git bisect bad   # This commit has the bug
-
-# Skip a commit (if you can't test it)
-git bisect skip
-
-# End bisect session and return to original state
-git bisect reset
-
-# Visualize bisect process
-git bisect visualize
-git bisect view
-
-# Automate with a test script
-git bisect run <test-script>
-git bisect run npm test
-git bisect run ./test.sh
-
-# Show bisect log
-git bisect log
-```
-
-## Verification
-
-Run the verification script to check your solution:
-
-```powershell
-.\verify.ps1
-```
-
-The verification will check that:
-- You completed a bisect session
-- You identified the correct commit that introduced the bug
-- You understand which change caused the problem
-
-## Challenge Steps
-
-1. Navigate to the challenge directory
-2. View the bug: run the calculator and see it fails
-3. Start bisect: `git bisect start`
-4. Mark current as bad: `git bisect bad`
-5. Mark old commit as good: `git bisect good HEAD~10`
-6. Git will checkout a middle commit
-7. Test the current commit (run the test or check manually)
-8. Mark it: `git bisect good` or `git bisect bad`
-9. Repeat testing until Git identifies the bad commit
-10. Note the commit hash and message
-11. End bisect: `git bisect reset`
-12. Check the identified commit: `git show <bad-commit-hash>`
-13. Create a file named `bug-commit.txt` with the bad commit hash
-14. Run verification
-
-## Tips
-
-- Always start with a known good commit (far enough back)
-- Keep a clear way to test each commit (script or manual steps)
-- Use `git bisect log` to see your progress
-- `git bisect reset` returns you to your original state
-- You can bisect on any criteria, not just bugs (performance, features, etc.)
-- Automate with `git bisect run` for faster results
-- Each bisect step cuts remaining commits in half
-- Skip commits you can't build/test with `git bisect skip`
-
-## Manual vs Automated Bisect
-
-### Manual Bisect
-```powershell
-git bisect start
-git bisect bad
-git bisect good HEAD~20
-
-# For each commit Git checks out:
-npm test
-git bisect good  # or bad
-
-git bisect reset
-```
-
-### Automated Bisect
-```powershell
-git bisect start
-git bisect bad
-git bisect good HEAD~20
-git bisect run npm test
-# Git automatically tests each commit
-git bisect reset
-```
-
-The test script should exit with:
-- 0 for good (test passes)
-- 1-127 (except 125) for bad (test fails)
-- 125 for skip (can't test this commit)
-
-## Bisect Workflow Example
-
-### Finding a Performance Regression
-```powershell
-# App is slow now, was fast 50 commits ago
-git bisect start
-git bisect bad
-git bisect good HEAD~50
-
-# Create test script
-@'
-$output = npm start 2>&1 | Select-String "Started in"
-if ($output -match "Started in (\d+)") {
-  if ([int]$Matches[1] -gt 5000) { exit 1 } # Slow
-  else { exit 0 } # Fast
-}
-exit 1
-'@ | Out-File -FilePath test.ps1
-
-git bisect run pwsh test.ps1
-# Git finds the commit that made it slow
-```
-
-### Finding When a Feature Broke
-```powershell
-git bisect start
-git bisect bad
-git bisect good v1.0.0  # Last known good version
-
-# For each commit
-npm test -- user-login.test.js
-git bisect good  # or bad
-
-# Found! Commit abc123 broke login
-git show abc123
-```
-
-## Common Bisect Pitfalls
-
-### Pitfall 1: Testing Incorrectly
-- Make sure your test is consistent
-- Automate when possible to avoid human error
-- Use the same test for every commit
-
-### Pitfall 2: Wrong Good Commit
-- If the "good" commit actually has the bug, bisect will fail
-- Choose a commit you're confident was working
-
-### Pitfall 3: Multiple Bugs
-- Bisect finds one commit at a time
-- If multiple bugs exist, they might confuse the search
-- Fix found bugs and bisect again for others
-
-## What You'll Learn
-
-Git bisect is a powerful debugging tool that turns a tedious manual search into an efficient automated process. By leveraging binary search, you can quickly pinpoint problematic commits even in repositories with thousands of commits. This is invaluable for debugging regressions, performance issues, or any situation where something that worked before is now broken. Mastering bisect makes you a more effective debugger and shows deep Git proficiency.

02-advanced/04-bisect/reset.ps1

@@ -1,22 +0,0 @@
-#!/usr/bin/env pwsh
-
-<#
-.SYNOPSIS
-    Resets the bisect challenge environment.
-
-.DESCRIPTION
-    Removes the existing challenge directory and runs setup.ps1
-    to create a fresh challenge environment.
-#>
-
-Write-Host "Resetting challenge environment..." -ForegroundColor Yellow
-
-# Remove existing challenge directory if present
-if (Test-Path "challenge") {
-    Remove-Item -Path "challenge" -Recurse -Force
-    Write-Host "Removed existing challenge directory." -ForegroundColor Cyan
-}
-
-# Run setup script
-Write-Host "Running setup script...`n" -ForegroundColor Cyan
-& ".\setup.ps1"

02-advanced/04-bisect/setup.ps1

@@ -1,311 +0,0 @@
-#!/usr/bin/env pwsh
-
-<#
-.SYNOPSIS
-    Sets up the bisect challenge environment.
-
-.DESCRIPTION
-    Creates a Git repository with multiple commits where a bug is
-    introduced in one of them. Students use bisect to find it.
-#>
-
-# Remove existing challenge directory if present
-if (Test-Path "challenge") {
-    Write-Host "Removing existing challenge directory..." -ForegroundColor Yellow
-    Remove-Item -Path "challenge" -Recurse -Force
-}
-
-# Create challenge directory
-Write-Host "Creating challenge environment..." -ForegroundColor Cyan
-New-Item -ItemType Directory -Path "challenge" | Out-Null
-Set-Location "challenge"
-
-# Initialize git repository
-git init | Out-Null
-git config user.name "Workshop User" | Out-Null
-git config user.email "user@workshop.local" | Out-Null
-
-# Commit 1: Initial calculator
-$calc1 = @"
-class Calculator:
-    def add(self, a, b):
-        return a + b
-"@
-Set-Content -Path "calculator.py" -Value $calc1
-git add calculator.py
-git commit -m "Initial calculator with add function" | Out-Null
-
-# Commit 2: Add subtract
-$calc2 = @"
-class Calculator:
-    def add(self, a, b):
-        return a + b
-
-    def subtract(self, a, b):
-        return a - b
-"@
-Set-Content -Path "calculator.py" -Value $calc2
-git add calculator.py
-git commit -m "Add subtract function" | Out-Null
-
-# Commit 3: Add multiply
-$calc3 = @"
-class Calculator:
-    def add(self, a, b):
-        return a + b
-
-    def subtract(self, a, b):
-        return a - b
-
-    def multiply(self, a, b):
-        return a * b
-"@
-Set-Content -Path "calculator.py" -Value $calc3
-git add calculator.py
-git commit -m "Add multiply function" | Out-Null
-
-# Commit 4: Add divide
-$calc4 = @"
-class Calculator:
-    def add(self, a, b):
-        return a + b
-
-    def subtract(self, a, b):
-        return a - b
-
-    def multiply(self, a, b):
-        return a * b
-
-    def divide(self, a, b):
-        if b == 0:
-            raise ValueError('Division by zero')
-        return a / b
-"@
-Set-Content -Path "calculator.py" -Value $calc4
-git add calculator.py
-git commit -m "Add divide function" | Out-Null
-
-# Commit 5: Add modulo
-$calc5 = @"
-class Calculator:
-    def add(self, a, b):
-        return a + b
-
-    def subtract(self, a, b):
-        return a - b
-
-    def multiply(self, a, b):
-        return a * b
-
-    def divide(self, a, b):
-        if b == 0:
-            raise ValueError('Division by zero')
-        return a / b
-
-    def modulo(self, a, b):
-        return a % b
-"@
-Set-Content -Path "calculator.py" -Value $calc5
-git add calculator.py
-git commit -m "Add modulo function" | Out-Null
-
-# Commit 6: BUG - Introduce error in add function
-$calc6 = @"
-class Calculator:
-    def add(self, a, b):
-        return a - b  # BUG: Should be a + b
-
-    def subtract(self, a, b):
-        return a - b
-
-    def multiply(self, a, b):
-        return a * b
-
-    def divide(self, a, b):
-        if b == 0:
-            raise ValueError('Division by zero')
-        return a / b
-
-    def modulo(self, a, b):
-        return a % b
-"@
-Set-Content -Path "calculator.py" -Value $calc6
-git add calculator.py
-git commit -m "Refactor add function for clarity" | Out-Null
-
-# Commit 7: Add power function (bug still exists)
-$calc7 = @"
-class Calculator:
-    def add(self, a, b):
-        return a - b  # BUG: Should be a + b
-
-    def subtract(self, a, b):
-        return a - b
-
-    def multiply(self, a, b):
-        return a * b
-
-    def divide(self, a, b):
-        if b == 0:
-            raise ValueError('Division by zero')
-        return a / b
-
-    def modulo(self, a, b):
-        return a % b
-
-    def power(self, a, b):
-        return a ** b
-"@
-Set-Content -Path "calculator.py" -Value $calc7
-git add calculator.py
-git commit -m "Add power function" | Out-Null
-
-# Commit 8: Add square root
-$calc8 = @"
-import math
-
-class Calculator:
-    def add(self, a, b):
-        return a - b  # BUG: Should be a + b
-
-    def subtract(self, a, b):
-        return a - b
-
-    def multiply(self, a, b):
-        return a * b
-
-    def divide(self, a, b):
-        if b == 0:
-            raise ValueError('Division by zero')
-        return a / b
-
-    def modulo(self, a, b):
-        return a % b
-
-    def power(self, a, b):
-        return a ** b
-
-    def sqrt(self, a):
-        return math.sqrt(a)
-"@
-Set-Content -Path "calculator.py" -Value $calc8
-git add calculator.py
-git commit -m "Add square root function" | Out-Null
-
-# Commit 9: Add absolute value
-$calc9 = @"
-import math
-
-class Calculator:
-    def add(self, a, b):
-        return a - b  # BUG: Should be a + b
-
-    def subtract(self, a, b):
-        return a - b
-
-    def multiply(self, a, b):
-        return a * b
-
-    def divide(self, a, b):
-        if b == 0:
-            raise ValueError('Division by zero')
-        return a / b
-
-    def modulo(self, a, b):
-        return a % b
-
-    def power(self, a, b):
-        return a ** b
-
-    def sqrt(self, a):
-        return math.sqrt(a)
-
-    def abs(self, a):
-        return abs(a)
-"@
-Set-Content -Path "calculator.py" -Value $calc9
-git add calculator.py
-git commit -m "Add absolute value function" | Out-Null
-
-# Commit 10: Add max function
-$calc10 = @"
-import math
-
-class Calculator:
-    def add(self, a, b):
-        return a - b  # BUG: Should be a + b
-
-    def subtract(self, a, b):
-        return a - b
-
-    def multiply(self, a, b):
-        return a * b
-
-    def divide(self, a, b):
-        if b == 0:
-            raise ValueError('Division by zero')
-        return a / b
-
-    def modulo(self, a, b):
-        return a % b
-
-    def power(self, a, b):
-        return a ** b
-
-    def sqrt(self, a):
-        return math.sqrt(a)
-
-    def abs(self, a):
-        return abs(a)
-
-    def max(self, a, b):
-        return a if a > b else b
-"@
-Set-Content -Path "calculator.py" -Value $calc10
-git add calculator.py
-git commit -m "Add max function" | Out-Null
-
-# Create a test file
-$test = @"
-import sys
-from calculator import Calculator
-
-calc = Calculator()
-
-# Test addition (this will fail due to bug)
-result = calc.add(5, 3)
-if result != 8:
-    print(f'FAIL: add(5, 3) returned {result}, expected 8')
-    sys.exit(1)
-
-print('PASS: All tests passed')
-sys.exit(0)
-"@
-Set-Content -Path "test.py" -Value $test
-
-# Return to module directory
-Set-Location ..
-
-Write-Host "`n========================================" -ForegroundColor Green
-Write-Host "Challenge environment created!" -ForegroundColor Green
-Write-Host "========================================" -ForegroundColor Green
-Write-Host "`nSituation:" -ForegroundColor Cyan
-Write-Host "The calculator has a bug - addition doesn't work correctly!" -ForegroundColor Red
-Write-Host "calc.add(5, 3) returns 2 instead of 8" -ForegroundColor Red
-Write-Host "`nThe bug was introduced somewhere in the last 10 commits." -ForegroundColor Yellow
-Write-Host "Manually checking each commit would be tedious." -ForegroundColor Yellow
-Write-Host "Use git bisect to find it efficiently!" -ForegroundColor Green
-Write-Host "`nYour task:" -ForegroundColor Yellow
-Write-Host "1. Navigate to the challenge directory: cd challenge" -ForegroundColor White
-Write-Host "2. Test the bug: python test.py (it will fail)" -ForegroundColor White
-Write-Host "3. Start bisect: git bisect start" -ForegroundColor White
-Write-Host "4. Mark current as bad: git bisect bad" -ForegroundColor White
-Write-Host "5. Mark old commit as good: git bisect good HEAD~10" -ForegroundColor White
-Write-Host "6. Git will checkout a commit - test it: python test.py" -ForegroundColor White
-Write-Host "7. Mark result: git bisect good (if test passes) or git bisect bad (if it fails)" -ForegroundColor White
-Write-Host "8. Repeat until Git finds the first bad commit" -ForegroundColor White
-Write-Host "9. Note the commit hash" -ForegroundColor White
-Write-Host "10. End bisect: git bisect reset" -ForegroundColor White
-Write-Host "11. Create bug-commit.txt with the bad commit hash" -ForegroundColor White
-Write-Host "`nHint: The bug is in commit 6 ('Refactor add function for clarity')" -ForegroundColor Cyan
-Write-Host "Run '../verify.ps1' from the challenge directory to check your solution.`n" -ForegroundColor Cyan

02-advanced/04-bisect/verify.ps1

@@ -1,133 +0,0 @@
-#!/usr/bin/env pwsh
-
-<#
-.SYNOPSIS
-    Verifies the bisect challenge solution.
-
-.DESCRIPTION
-    Checks that the user successfully used git bisect to find
-    the commit that introduced the bug.
-#>
-
-Set-Location "challenge" -ErrorAction SilentlyContinue
-
-# Check if challenge directory exists
-if (-not (Test-Path "../verify.ps1")) {
-    Write-Host "Error: Please run this script from the module directory" -ForegroundColor Red
-    exit 1
-}
-
-if (-not (Test-Path ".")) {
-    Write-Host "Error: Challenge directory not found. Run setup.ps1 first." -ForegroundColor Red
-    Set-Location ..
-    exit 1
-}
-
-Write-Host "Verifying your solution..." -ForegroundColor Cyan
-
-# Check if git repository exists
-if (-not (Test-Path ".git")) {
-    Write-Host "[FAIL] No git repository found." -ForegroundColor Red
-    Set-Location ..
-    exit 1
-}
-
-# Make sure we're not in a bisect session
-$bisectHead = Test-Path ".git/BISECT_HEAD"
-if ($bisectHead) {
-    Write-Host "[FAIL] You're still in a bisect session." -ForegroundColor Red
-    Write-Host "Hint: End the bisect with: git bisect reset" -ForegroundColor Yellow
-    Set-Location ..
-    exit 1
-}
-
-# Check if bug-commit.txt exists
-if (-not (Test-Path "bug-commit.txt")) {
-    Write-Host "[FAIL] bug-commit.txt not found." -ForegroundColor Red
-    Write-Host "Hint: After finding the bad commit, create a file with its hash:" -ForegroundColor Yellow
-    Write-Host "      echo 'commit-hash' > bug-commit.txt" -ForegroundColor Yellow
-    Set-Location ..
-    exit 1
-}
-
-# Read the commit hash from the file
-$userCommit = (Get-Content "bug-commit.txt" -Raw).Trim()
-
-if (-not $userCommit) {
-    Write-Host "[FAIL] bug-commit.txt is empty." -ForegroundColor Red
-    Set-Location ..
-    exit 1
-}
-
-# Get all commit hashes
-$allCommits = git log --pretty=format:"%H" --reverse 2>$null
-$commitArray = $allCommits -split "`n"
-
-# The bug was introduced in commit 6 (index 5 in 0-based array)
-# This is the "Refactor add function for clarity" commit
-$badCommitMessage = git log --pretty=format:"%s" --grep="Refactor add function" 2>$null
-$actualBadCommit = git log --pretty=format:"%H" --grep="Refactor add function" 2>$null
-
-if (-not $actualBadCommit) {
-    Write-Host "[FAIL] Could not find the expected bad commit." -ForegroundColor Red
-    Write-Host "Something may be wrong with the repository setup." -ForegroundColor Yellow
-    Set-Location ..
-    exit 1
-}
-
-# Check if user found the correct commit
-if ($userCommit -ne $actualBadCommit) {
-    # Maybe they provided a short hash
-    if ($actualBadCommit -like "$userCommit*") {
-        Write-Host "[PASS] Correct commit identified (using short hash)!" -ForegroundColor Green
-    } else {
-        Write-Host "[FAIL] Incorrect commit identified." -ForegroundColor Red
-        Write-Host "You identified: $userCommit" -ForegroundColor Yellow
-        Write-Host "Expected: $actualBadCommit" -ForegroundColor Yellow
-        Write-Host "Expected commit message: 'Refactor add function for clarity'" -ForegroundColor Yellow
-        Write-Host "`nHint: Use git bisect to find where the add function broke:" -ForegroundColor Yellow
-        Write-Host "  git bisect start" -ForegroundColor White
-        Write-Host "  git bisect bad" -ForegroundColor White
-        Write-Host "  git bisect good HEAD~10" -ForegroundColor White
-        Write-Host "  # Then test with: node test.py" -ForegroundColor White
-        Write-Host "  git bisect good  # or bad" -ForegroundColor White
-        Set-Location ..
-        exit 1
-    }
-} else {
-    Write-Host "[PASS] Correct commit identified!" -ForegroundColor Green
-}
-
-# Verify the commit actually has the bug
-git checkout $actualBadCommit 2>$null | Out-Null
-$calcContent = Get-Content "calculator.py" -Raw
-
-if ($calcContent -notmatch "add\(a, b\)[\s\S]*?return a - b") {
-    Write-Host "[WARNING] The identified commit doesn't seem to have the expected bug." -ForegroundColor Yellow
-}
-
-# Return to latest commit
-git checkout $(git branch --show-current 2>$null) 2>$null | Out-Null
-if (-not $?) {
-    git checkout main 2>$null | Out-Null
-}
-
-# Success!
-Write-Host "`n========================================" -ForegroundColor Green
-Write-Host "SUCCESS! Challenge completed!" -ForegroundColor Green
-Write-Host "========================================" -ForegroundColor Green
-Write-Host "`nYou have successfully:" -ForegroundColor Cyan
-Write-Host "- Used git bisect to perform a binary search" -ForegroundColor White
-Write-Host "- Tested commits systematically" -ForegroundColor White
-Write-Host "- Identified the exact commit that introduced the bug" -ForegroundColor White
-Write-Host "- Found: '$badCommitMessage'" -ForegroundColor White
-Write-Host "`nThe bug was in commit 6 out of 10 commits." -ForegroundColor Yellow
-Write-Host "Manual checking: up to 10 tests" -ForegroundColor Yellow
-Write-Host "With bisect: only ~4 tests needed!" -ForegroundColor Green
-Write-Host "`nYou now understand git bisect!" -ForegroundColor Green
-Write-Host "`nKey takeaway:" -ForegroundColor Yellow
-Write-Host "Bisect uses binary search to efficiently find bugs," -ForegroundColor White
-Write-Host "saving massive amounts of time in large codebases.`n" -ForegroundColor White
-
-Set-Location ..
-exit 0

02-advanced/05-blame/README.md

@@ -1,169 +0,0 @@
-# Module 05: Git Blame - Code Archaeology
-
-## Learning Objectives
-
-In this module, you will:
-- Use `git blame` to find who made specific changes
-- Understand blame output format and information
-- Track down problematic code changes
-- Learn when and why to use `git blame`
-- Investigate code history to understand context
-
-## Challenge
-
-### Setup
-
-Run the setup script to create your challenge environment:
-
-```powershell
-.\setup.ps1
-```
-
-This will create a `challenge/` directory with a Git repository that has a security issue - someone committed hardcoded credentials!
-
-### Your Task
-
-Your team has discovered a security vulnerability: hardcoded credentials were added to the codebase. Your job is to investigate who made this change and document your findings.
-
-The setup script will create an `investigation.md` file in the challenge directory with questions for you to answer. Use `git blame` and other Git commands to track down the responsible developer.
-
-**Scenario:**
-- Someone added hardcoded login credentials (`username: "admin"`, `password: "admin123"`) to `app.py`
-- This is a critical security issue
-- You need to identify who made this change so the team can discuss it with them
-
-**Suggested Approach:**
-
-1. Navigate to the challenge directory: `cd challenge`
-2. Open `investigation.md` to see the questions
-3. Examine `app.py` to find the suspicious line
-4. Use `git blame` to find who wrote that line
-5. Use `git blame -e` to see email addresses
-6. Use `git show` to see the full commit details
-7. Document your findings in `investigation.md`
-
-> **Important Notes:**
-> - `git blame` shows who last modified each line
-> - Each line shows: commit hash, author, date, line number, and content
-> - Use `-e` flag to show email addresses
-> - Use `-L` to focus on specific line ranges
-
-## Key Concepts
-
-- **Git Blame**: Shows the revision and author who last modified each line of a file
-- **Code Archaeology**: Using Git history to understand when and why code changed
-- **Author Attribution**: Identifying who wrote specific code for context, not punishment
-- **Commit Context**: Understanding the full story behind a change
-
-## Understanding Git Blame Output
-
-When you run `git blame app.py`, you'll see output like this:
-
-```
-a1b2c3d4 (John Doe     2024-01-15 10:30:45 +0000  1) # app.py - Main application
-a1b2c3d4 (John Doe     2024-01-15 10:30:45 +0000  2)
-e5f6g7h8 (Jane Smith   2024-01-16 14:20:10 +0000  3) from auth import login
-e5f6g7h8 (Jane Smith   2024-01-16 14:20:10 +0000  4)
-i9j0k1l2 (Bob Wilson   2024-01-17 09:15:30 +0000  5) def main():
-i9j0k1l2 (Bob Wilson   2024-01-17 09:15:30 +0000  6)     login("admin", "admin123")
-```
-
-### Breaking It Down
-
-Each line shows:
-1. **Commit Hash** (`a1b2c3d4`) - The commit that last changed this line
-2. **Author Name** (`John Doe`) - Who made the change
-3. **Date/Time** (`2024-01-15 10:30:45 +0000`) - When it was changed
-4. **Line Number** (`1`) - The line number in the current file
-5. **Line Content** (`# app.py - Main application`) - The actual code
-
-### Useful Git Blame Options
-
-```bash
-git blame <file>                 # Basic blame output
-git blame -e <file>              # Show email addresses instead of names
-git blame -L 10,20 <file>        # Only show lines 10-20
-git blame -L 10,+5 <file>        # Show 5 lines starting from line 10
-git blame -w <file>              # Ignore whitespace changes
-git blame <commit> <file>        # Blame as of specific commit
-```
-
-### Following Up After Blame
-
-Once you find the commit hash:
-
-```bash
-git show <commit-hash>           # See the full commit details
-git log -p <commit-hash>         # See commit with diff
-git show <commit-hash> --stat    # See which files were changed
-```
-
-## When to Use Git Blame
-
-**Good reasons to use `git blame`:**
-- 🔍 Understanding why code was written a certain way
-- 📚 Finding context for a piece of code
-- 🐛 Identifying when a bug was introduced
-- 💡 Discovering the thought process behind a decision
-- 👥 Finding who to ask about specific code
-
-**Not for blaming:**
-- ❌ Finding someone to blame for mistakes
-- ❌ Tracking "productivity" or code ownership
-- ❌ Punishing developers for old code
-
-**Remember:** Code archaeology is about understanding, not blaming!
-
-## Useful Commands
-
-### Investigation Commands
-
-```bash
-# Find who changed each line
-git blame <file>
-git blame -e <file>              # With email addresses
-
-# Focus on specific lines
-git blame -L 10,20 <file>        # Lines 10-20
-git blame -L :function_name <file>  # Specific function (Git 2.20+)
-
-# See historical blame
-git blame <commit>^ <file>       # Blame before a specific commit
-
-# Combine with grep
-git blame <file> | grep "pattern"  # Find who wrote lines matching pattern
-```
-
-### Context Commands
-
-```bash
-# See full commit details
-git show <commit-hash>
-git log -1 <commit-hash>         # Just the commit message
-
-# See all commits by author
-git log --author="name"
-
-# See what else changed in that commit
-git show <commit-hash> --stat
-```
-
-## Verification
-
-Once you've completed your investigation in `investigation.md`, verify your solution:
-
-```powershell
-.\verify.ps1
-```
-
-The verification script will check that you've identified the correct developer.
-
-## Need to Start Over?
-
-If you want to reset the challenge and start fresh:
-
-```powershell
-.\reset.ps1
-```
-
-This will remove the challenge directory and run the setup script again, giving you a clean slate.

02-advanced/05-blame/reset.ps1

@@ -1,24 +0,0 @@
-#!/usr/bin/env pwsh
-<#
-.SYNOPSIS
-    Resets the Module 05 challenge environment.
-
-.DESCRIPTION
-    This script removes the challenge directory and re-runs the setup script
-    to give you a fresh start.
-#>
-
-Write-Host "`n=== Resetting Module 05 Challenge ===" -ForegroundColor Cyan
-
-# Remove challenge directory if it exists
-if (Test-Path "challenge") {
-    Write-Host "Removing existing challenge directory..." -ForegroundColor Yellow
-    Remove-Item -Recurse -Force "challenge"
-    Write-Host "Challenge directory removed." -ForegroundColor Green
-} else {
-    Write-Host "No challenge directory found to remove." -ForegroundColor Yellow
-}
-
-# Run setup script
-Write-Host "`nRunning setup script..." -ForegroundColor Cyan
-& "./setup.ps1"

02-advanced/05-blame/setup.ps1

@@ -1,323 +0,0 @@
-#!/usr/bin/env pwsh
-<#
-.SYNOPSIS
-    Sets up the Module 05 challenge environment for git blame investigation.
-
-.DESCRIPTION
-    This script creates a challenge directory with a Git repository that
-    contains a security vulnerability (hardcoded credentials) for students
-    to investigate using git blame.
-#>
-
-Write-Host "`n=== Setting up Module 05 Challenge ===" -ForegroundColor Cyan
-
-# Remove existing challenge directory if it exists
-if (Test-Path "challenge") {
-    Write-Host "Removing existing challenge directory..." -ForegroundColor Yellow
-    Remove-Item -Recurse -Force "challenge"
-}
-
-# Create fresh challenge directory
-Write-Host "Creating challenge directory..." -ForegroundColor Green
-New-Item -ItemType Directory -Path "challenge" | Out-Null
-Set-Location "challenge"
-
-# Initialize Git repository
-Write-Host "Initializing Git repository..." -ForegroundColor Green
-git init | Out-Null
-
-# Commit 1: Initial project structure (by Alice)
-Write-Host "Creating initial project structure..." -ForegroundColor Green
-git config user.name "Alice Johnson"
-git config user.email "alice@example.com"
-
-$appContent = @"
-# app.py - Main application file
-
-def main():
-    print("Welcome to My App!")
-    # Application initialization code here
-    pass
-
-if __name__ == "__main__":
-    main()
-"@
-Set-Content -Path "app.py" -Value $appContent
-
-git add .
-git commit -m "Initial project structure" | Out-Null
-
-# Commit 2: Add authentication module (by Bob)
-Write-Host "Adding authentication module..." -ForegroundColor Green
-git config user.name "Bob Chen"
-git config user.email "bob@example.com"
-
-$authContent = @"
-# auth.py - Authentication module
-
-def login(username, password):
-    # Authenticate user
-    print(f"Logging in user: {username}")
-    return True
-
-def logout(username):
-    # Log out user
-    print(f"Logging out user: {username}")
-    return True
-"@
-Set-Content -Path "auth.py" -Value $authContent
-
-$appContent = @"
-# app.py - Main application file
-from auth import login, logout
-
-def main():
-    print("Welcome to My App!")
-    # Application initialization code here
-    pass
-
-if __name__ == "__main__":
-    main()
-"@
-Set-Content -Path "app.py" -Value $appContent
-
-git add .
-git commit -m "Add authentication module" | Out-Null
-
-# Commit 3: Add database connection (by Carol)
-Write-Host "Adding database connection..." -ForegroundColor Green
-git config user.name "Carol Martinez"
-git config user.email "carol@example.com"
-
-$databaseContent = @"
-# database.py - Database connection module
-
-def connect():
-    # Connect to database
-    print("Connecting to database...")
-    return True
-
-def disconnect():
-    # Disconnect from database
-    print("Disconnecting from database...")
-    return True
-"@
-Set-Content -Path "database.py" -Value $databaseContent
-
-$appContent = @"
-# app.py - Main application file
-from auth import login, logout
-from database import connect, disconnect
-
-def main():
-    print("Welcome to My App!")
-    connect()
-    # Application initialization code here
-    pass
-
-if __name__ == "__main__":
-    main()
-"@
-Set-Content -Path "app.py" -Value $appContent
-
-git add .
-git commit -m "Add database connection" | Out-Null
-
-# Commit 4: Add hardcoded credentials (THE SECURITY ISSUE - by Suspicious Developer)
-Write-Host "Adding suspicious change..." -ForegroundColor Green
-git config user.name "Suspicious Developer"
-git config user.email "guilty@email.com"
-
-$appContent = @"
-# app.py - Main application file
-from auth import login, logout
-from database import connect, disconnect
-
-def main():
-    print("Welcome to My App!")
-    connect()
-    # Quick fix for testing - TODO: Remove before production!
-    if login("admin", "admin123"):
-        print("Admin logged in successfully")
-    pass
-
-if __name__ == "__main__":
-    main()
-"@
-Set-Content -Path "app.py" -Value $appContent
-
-git add .
-git commit -m "Add quick test login for debugging" | Out-Null
-
-# Commit 5: Add logging (by David - innocent commit after the security issue)
-Write-Host "Adding logging module..." -ForegroundColor Green
-git config user.name "David Lee"
-git config user.email "david@example.com"
-
-$loggingContent = @"
-# logging_config.py - Logging configuration
-
-import logging
-
-def setup_logging():
-    logging.basicConfig(
-        level=logging.INFO,
-        format='%(asctime)s - %(name)s - %(levelname)s - %(message)s'
-    )
-    return logging.getLogger(__name__)
-"@
-Set-Content -Path "logging_config.py" -Value $loggingContent
-
-git add .
-git commit -m "Add logging configuration" | Out-Null
-
-# Reset git config
-git config user.name "Workshop Student"
-git config user.email "student@example.com"
-
-# Create investigation.md template
-Write-Host "Creating investigation template..." -ForegroundColor Green
-$investigationTemplate = @"
-# Security Investigation Report
-
-## Incident Overview
-
-A security vulnerability has been discovered in the codebase: hardcoded credentials in `app.py`.
-
-**Your task:** Use git blame and related Git commands to investigate this security issue and document your findings.
-
----
-
-## Question 1: What line number contains the hardcoded password?
-
-Look at `app.py` and find the line with `"admin123"`.
-
-**Your Answer:**
-
-<!-- Write the line number here -->
-
----
-
-## Question 2: Who added the hardcoded credentials?
-
-Use `git blame` to find the email address of the developer who wrote the line with the hardcoded credentials.
-
-**Suggested commands:**
-``````bash
-# View blame with email addresses
-git blame -e app.py
-
-# Or focus on specific lines (if you know the line range)
-git blame -L 8,10 app.py
-
-# Look for the line containing login("admin", "admin123")
-``````
-
-**Your Answer (provide the email address):**
-
-<!-- Write the email address here -->
-
----
-
-## Question 3: What was the commit message for the change that introduced the hardcoded credentials?
-
-Once you've found the commit hash from git blame, use `git show` or `git log` to see the full commit message.
-
-**Suggested commands:**
-``````bash
-# After finding the commit hash from git blame
-git show <commit-hash>
-git log -1 <commit-hash>
-``````
-
-**Your Answer:**
-
-<!-- Write the commit message here -->
-
----
-
-## Question 4: How many files were modified in the commit that added the hardcoded credentials?
-
-Use `git show` with the `--stat` flag to see which files were changed.
-
-**Suggested commands:**
-``````bash
-git show <commit-hash> --stat
-git show <commit-hash> --name-only
-``````
-
-**Your Answer:**
-
-<!-- Write the number or list the files here -->
-
----
-
-## Question 5: When was this security vulnerability introduced?
-
-Use the timestamp from git blame to determine when the vulnerable code was committed.
-
-**Your Answer (date and time):**
-
-<!-- Write the date/time here -->
-
----
-
-## Recommendations
-
-Based on your investigation, what actions should the team take?
-
-**Your Recommendations:**
-
-<!-- Write your recommendations here, for example:
-- Remove hardcoded credentials
-- Implement proper environment variables
-- Add pre-commit hooks to prevent secrets
-- Review with the developer who made the change
--->
-
----
-
-## Quick Reference - Investigation Commands
-
-**Finding Who Changed What:**
-``````bash
-git blame <file>                    # Show who last modified each line
-git blame -e <file>                 # Show with email addresses
-git blame -L 10,20 <file>           # Blame specific line range
-``````
-
-**Getting Commit Details:**
-``````bash
-git show <commit-hash>              # See full commit details
-git show <commit-hash> --stat       # See files changed
-git log -1 <commit-hash>            # See commit message only
-git log -p <commit-hash>            # See commit with diff
-``````
-
-**Searching History:**
-``````bash
-git log --all --grep="keyword"      # Search commit messages
-git log --author="name"             # See commits by author
-git log --since="2 weeks ago"       # Recent commits
-``````
-
----
-
-When you're done with your investigation, run ``..\verify.ps1`` to check your answers!
-"@
-
-Set-Content -Path "investigation.md" -Value $investigationTemplate
-
-# Return to module directory
-Set-Location ..
-
-Write-Host "`n=== Setup Complete! ===" -ForegroundColor Green
-Write-Host "`nYour investigation environment is ready in the 'challenge/' directory." -ForegroundColor Cyan
-Write-Host "`nScenario: Someone committed hardcoded credentials to app.py!" -ForegroundColor Yellow
-Write-Host "`nNext steps:" -ForegroundColor Cyan
-Write-Host "  1. cd challenge" -ForegroundColor White
-Write-Host "  2. Open 'investigation.md' to see the investigation questions" -ForegroundColor White
-Write-Host "  3. Use 'git blame -e app.py' to start your investigation" -ForegroundColor White
-Write-Host "  4. Fill in your findings in 'investigation.md'" -ForegroundColor White
-Write-Host "  5. Run '..\verify.ps1' to check your investigation" -ForegroundColor White
-Write-Host ""

02-advanced/05-blame/verify.ps1

@@ -1,114 +0,0 @@
-#!/usr/bin/env pwsh
-<#
-.SYNOPSIS
-    Verifies the Module 05 challenge solution.
-
-.DESCRIPTION
-    This script checks that:
-    - The challenge directory exists
-    - A Git repository exists
-    - investigation.md exists with correct findings about the security issue
-#>
-
-Write-Host "`n=== Verifying Module 05 Solution ===" -ForegroundColor Cyan
-
-$allChecksPassed = $true
-
-# Check if challenge directory exists
-if (-not (Test-Path "challenge")) {
-    Write-Host "[FAIL] Challenge directory not found. Did you run setup.ps1?" -ForegroundColor Red
-    exit 1
-}
-
-Set-Location "challenge"
-
-# Check if git repository exists
-if (-not (Test-Path ".git")) {
-    Write-Host "[FAIL] Not a git repository. Did you run setup.ps1?" -ForegroundColor Red
-    Set-Location ..
-    exit 1
-}
-
-# Check if investigation.md exists
-if (-not (Test-Path "investigation.md")) {
-    Write-Host "[FAIL] investigation.md not found. Did you run setup.ps1?" -ForegroundColor Red
-    Write-Host "[HINT] The setup script should have created investigation.md for you" -ForegroundColor Yellow
-    $allChecksPassed = $false
-} else {
-    Write-Host "[PASS] investigation.md exists" -ForegroundColor Green
-
-    # Read the investigation file
-    $investigation = Get-Content "investigation.md" -Raw
-    $investigationLower = $investigation.ToLower()
-
-    # Check 1: Line number (line 8 contains the hardcoded password)
-    if ($investigationLower -match "8") {
-        Write-Host "[PASS] Correct line number identified" -ForegroundColor Green
-    } else {
-        Write-Host "[FAIL] Line number not found or incorrect" -ForegroundColor Red
-        Write-Host "[HINT] Look at app.py to find which line contains 'admin123'" -ForegroundColor Yellow
-        $allChecksPassed = $false
-    }
-
-    # Check 2: Email address (guilty@email.com)
-    if ($investigationLower -match "guilty@email\.com") {
-        Write-Host "[PASS] Correct email address found using git blame!" -ForegroundColor Green
-    } else {
-        Write-Host "[FAIL] Developer's email address not found" -ForegroundColor Red
-        Write-Host "[HINT] Use 'git blame -e app.py' to see who changed each line with email addresses" -ForegroundColor Yellow
-        $allChecksPassed = $false
-    }
-
-    # Check 3: Commit message (contains "test" or "debug" or "quick")
-    if ($investigationLower -match "test|debug|quick") {
-        Write-Host "[PASS] Commit message identified" -ForegroundColor Green
-    } else {
-        Write-Host "[FAIL] Commit message not found" -ForegroundColor Red
-        Write-Host "[HINT] Use 'git show <commit-hash>' to see the commit message" -ForegroundColor Yellow
-        $allChecksPassed = $false
-    }
-
-    # Check 4: Number of files (1 file - only app.py)
-    if ($investigationLower -match "1|one|app\.py") {
-        Write-Host "[PASS] Number of files modified identified" -ForegroundColor Green
-    } else {
-        Write-Host "[FAIL] Number of files modified not found" -ForegroundColor Red
-        Write-Host "[HINT] Use 'git show <commit-hash> --stat' to see which files were changed" -ForegroundColor Yellow
-        $allChecksPassed = $false
-    }
-
-    # Check 5: Some mention of timestamp/date (flexible check)
-    # We're just checking they attempted to answer this
-    if ($investigationLower -match "202|date|time|\d{4}-\d{2}-\d{2}") {
-        Write-Host "[PASS] Timestamp/date documented" -ForegroundColor Green
-    } else {
-        Write-Host "[FAIL] Timestamp/date not documented" -ForegroundColor Red
-        Write-Host "[HINT] The git blame output shows the date and time of each change" -ForegroundColor Yellow
-        $allChecksPassed = $false
-    }
-}
-
-Set-Location ..
-
-# Final summary
-if ($allChecksPassed) {
-    Write-Host "`n" -NoNewline
-    Write-Host "=====================================" -ForegroundColor Green
-    Write-Host "   INVESTIGATION COMPLETE!" -ForegroundColor Green
-    Write-Host "=====================================" -ForegroundColor Green
-    Write-Host "`nExcellent detective work! You've successfully used git blame to track down the security issue." -ForegroundColor Cyan
-    Write-Host "`nYou now know how to:" -ForegroundColor Cyan
-    Write-Host "  - Use git blame to find who modified each line" -ForegroundColor White
-    Write-Host "  - Read and interpret git blame output" -ForegroundColor White
-    Write-Host "  - Use git blame with -e flag to show email addresses" -ForegroundColor White
-    Write-Host "  - Find commit details after identifying changes with blame" -ForegroundColor White
-    Write-Host "  - Conduct code archaeology to understand code history" -ForegroundColor White
-    Write-Host "`nRemember: git blame is for understanding, not blaming!" -ForegroundColor Yellow
-    Write-Host "`nReady for the next module!" -ForegroundColor Green
-    Write-Host ""
-} else {
-    Write-Host "`n[SUMMARY] Some checks failed. Review the hints above and try again." -ForegroundColor Red
-    Write-Host "[INFO] You can run this verification script as many times as needed." -ForegroundColor Yellow
-    Write-Host ""
-    exit 1
-}

02-advanced/06-merge-strategies/README.md

@@ -1,448 +0,0 @@
-# Module 06: Merge Strategies - Fast-Forward vs Three-Way
-
-## Learning Objectives
-
-In this module, you will:
-- Understand the difference between fast-forward and three-way merges
-- Learn when Git automatically chooses each strategy
-- Force specific merge behavior with `--no-ff` and `--ff-only` flags
-- Understand the trade-offs between linear and branched history
-- Make informed decisions about merge strategies for different workflows
-
-## Prerequisites
-
-Before starting this module, you should have completed:
-- Module 03: Branching Basics
-- Module 04: Merging Branches
-
-## Challenge
-
-### Setup
-
-Run the setup script to create your challenge environment:
-
-```powershell
-.\setup.ps1
-```
-
-This will create a `challenge/` directory with scenarios for both fast-forward and three-way merges.
-
-### Your Task
-
-You'll experiment with both types of merges and learn how to control Git's merge behavior.
-
-**Part 1: Fast-Forward Merge**
-1. Merge `feature-fast-forward` into main
-2. Observe Git's "Fast-forward" message
-3. Examine the linear history
-
-**Part 2: Three-Way Merge**
-4. Merge `feature-divergent` into main
-5. Observe Git creates a merge commit
-6. Examine the branched history
-
-**Part 3: Force Merge Commit**
-7. Merge `feature-optional` into main using `--no-ff`
-8. Compare with the fast-forward from Part 1
-
-**Steps:**
-
-1. Navigate to the challenge directory: `cd challenge`
-2. View all branches: `git branch -a`
-3. View the current graph: `git log --oneline --graph --all`
-4. Merge feature-fast-forward: `git merge feature-fast-forward`
-5. Check the log: `git log --oneline --graph`
-6. Merge feature-divergent: `git merge feature-divergent`
-7. Check the log: `git log --oneline --graph --all`
-8. Merge feature-optional with --no-ff: `git merge --no-ff feature-optional`
-9. Compare the results: `git log --oneline --graph --all`
-
-> **Key Questions to Consider:**
-> - Which merges created merge commits?
-> - Which merge kept a linear history?
-> - How does `--no-ff` change Git's behavior?
-> - When would you prefer each approach?
-
-## Understanding Merge Strategies
-
-### Fast-Forward Merge
-
-A **fast-forward merge** happens when the target branch (e.g., `main`) hasn't changed since the feature branch was created. Git simply "fast-forwards" the branch pointer to the latest commit on the feature branch.
-
-**Before the merge:**
-```
-main:    A---B
-              \
-feature:       C---D
-```
-
-In this scenario:
-- Commit B is where `feature` branched off from `main`
-- Commits C and D are new commits on the `feature` branch
-- `main` has NO new commits since the branch split
-- The history is **linear** (straight line from A to D)
-
-**After `git merge feature` (on main):**
-```
-main:    A---B---C---D
-                     ↑
-                  feature
-```
-
-**What happened:**
-- Git moved the `main` pointer forward to commit D
-- NO merge commit was created
-- The history remains linear (a straight line)
-- Both `main` and `feature` now point to the same commit (D)
-
-**Command:**
-```bash
-git switch main
-git merge feature-fast-forward
-```
-
-**Output you'll see:**
-```
-Updating abc123..def456
-Fast-forward
- new-feature.py | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-```
-
-**Notice the "Fast-forward" message!**
-
-**Characteristics:**
-- ✅ Keeps history linear and clean
-- ✅ Simpler to read in `git log`
-- ✅ No extra merge commit
-- ❌ Loses visibility that work was done on a branch
-- ❌ Harder to revert entire features at once
-
----
-
-### Three-Way Merge
-
-A **three-way merge** happens when BOTH branches have new commits since they diverged. Git must combine changes from both branches, which creates a special merge commit.
-
-**Before the merge:**
-```
-main:    A---B---C---E
-              \
-feature:       D---F
-```
-
-In this scenario:
-- Commit B is where `feature` branched off from `main`
-- Commits C and E are new commits on `main`
-- Commits D and F are new commits on `feature`
-- The branches have **diverged** (both have unique commits)
-
-**After `git merge feature` (on main):**
-```
-main:    A---B---C---E---M
-              \         /
-feature:       D---F---/
-```
-
-**What happened:**
-- Git created a new **merge commit** (M)
-- Commit M has TWO parent commits: E (from main) and F (from feature)
-- The merge commit combines changes from both branches
-- The history shows the branches converging
-
-**Why it's called "three-way":**
-Git uses THREE commits to perform the merge:
-1. **Commit B** - The common ancestor (where branches split)
-2. **Commit E** - The latest commit on `main`
-3. **Commit F** - The latest commit on `feature`
-
-Git compares all three to figure out what changed on each branch and how to combine them.
-
-**Command:**
-```bash
-git switch main
-git merge feature-divergent
-```
-
-**Output you'll see:**
-```
-Merge made by the 'ort' strategy.
- feature-code.py | 5 +++++
- 1 file changed, 5 insertions(+)
-```
-
-**Notice it says "Merge made by the 'ort' strategy" instead of "Fast-forward"!**
-
-**Characteristics:**
-- ✅ Preserves feature branch history
-- ✅ Shows when features were merged
-- ✅ Easier to revert entire features (revert the merge commit)
-- ✅ Clear visualization in git log --graph
-- ❌ Creates more commits (merge commits)
-- ❌ History can become complex with many merges
-
----
-
-### When Does Each Type Happen?
-
-| Situation | Merge Type | Merge Commit? | Git's Behavior |
-|-----------|------------|---------------|----------------|
-| Target branch (main) has NO new commits | Fast-Forward | ❌ No | Automatic |
-| Target branch (main) HAS new commits | Three-Way | ✅ Yes | Automatic |
-| You use `--no-ff` flag | Three-Way | ✅ Yes | Forced |
-| You use `--ff-only` flag | Fast-Forward | ❌ No | Fails if not possible |
-
-**Git chooses automatically** based on the branch state, but you can override this behavior!
-
----
-
-## Controlling Merge Behavior
-
-### Force a Merge Commit with `--no-ff`
-
-Even if a fast-forward is possible, you can force Git to create a merge commit:
-
-```bash
-git merge --no-ff feature-optional
-```
-
-**Before (fast-forward would be possible):**
-```
-main:    A---B
-              \
-feature:       C---D
-```
-
-**After `git merge --no-ff feature` (on main):**
-```
-main:    A---B-------M
-              \     /
-feature:       C---D
-```
-
-Notice that even though main didn't change, a merge commit (M) was created!
-
-**When to use `--no-ff`:**
-- ✅ When you want to preserve the feature branch in history
-- ✅ For important features that might need to be reverted
-- ✅ In team workflows where you want to see when features were merged
-- ✅ When following a branching model like Git Flow
-
-**Example:**
-```bash
-# You've finished a major feature on feature-auth
-git switch main
-git merge --no-ff feature-auth -m "Merge feature-auth: Add user authentication system"
-```
-
-This creates a clear marker in history showing when and what was merged.
-
----
-
-### Require Fast-Forward with `--ff-only`
-
-You can make Git fail the merge if a fast-forward isn't possible:
-
-```bash
-git merge --ff-only feature-branch
-```
-
-**What happens:**
-- ✅ If fast-forward is possible, Git merges
-- ❌ If branches have diverged, Git refuses to merge
-
-**Output when it fails:**
-```
-fatal: Not possible to fast-forward, aborting.
-```
-
-**When to use `--ff-only`:**
-- ✅ When you want to keep history strictly linear
-- ✅ To ensure you rebase before merging
-- ✅ In workflows that prohibit merge commits
-
-**Example workflow:**
-```bash
-# Try to merge
-git merge --ff-only feature-branch
-
-# If it fails, rebase first
-git switch feature-branch
-git rebase main
-git switch main
-git merge --ff-only feature-branch  # Now it works!
-```
-
----
-
-## Visualizing the Difference
-
-### Linear History (Fast-Forward)
-
-```bash
-git log --oneline --graph
-```
-
-```
-* d1e2f3g (HEAD -> main, feature) Add feature C
-* a4b5c6d Add feature B
-* 7e8f9g0 Add feature A
-* 1a2b3c4 Initial commit
-```
-
-Notice the straight line! No branching visible.
-
----
-
-### Branched History (Three-Way Merge)
-
-```bash
-git log --oneline --graph --all
-```
-
-```
-*   m1e2r3g (HEAD -> main) Merge branch 'feature'
-|\
-| * f4e5a6t (feature) Add feature implementation
-| * u7r8e9s Feature setup
-* | a1b2c3d Update documentation on main
-|/
-* 0i1n2i3t Initial commit
-```
-
-Notice the branching pattern! You can see:
-- Where the branch split (`|/`)
-- Commits on each branch (`|`)
-- Where branches merged (`*   merge commit`)
-
----
-
-## Decision Guide: Which Strategy to Use?
-
-### Use Fast-Forward When:
-- ✅ Working on personal projects
-- ✅ Want simplest, cleanest history
-- ✅ Small changes or bug fixes
-- ✅ Don't need to track feature branches
-- ✅ History readability is top priority
-
-### Use Three-Way Merge (or force with --no-ff) When:
-- ✅ Working in teams
-- ✅ Want to preserve feature context
-- ✅ Need to revert features as units
-- ✅ Following Git Flow or similar workflow
-- ✅ Important to see when features were integrated
-
-### Force Fast-Forward (--ff-only) When:
-- ✅ Enforcing rebase workflow
-- ✅ Maintaining strictly linear history
-- ✅ Integration branch requires clean history
-
----
-
-## Comparison Table
-
-| Aspect | Fast-Forward | Three-Way |
-|--------|-------------|-----------|
-| **When it happens** | Target branch unchanged | Both branches have new commits |
-| **Merge commit created?** | ❌ No | ✅ Yes |
-| **History appearance** | Linear | Branched |
-| **Command output** | "Fast-forward" | "Merge made by..." |
-| **Git log --graph** | Straight line | Fork and merge pattern |
-| **Can revert entire feature?** | ❌ No (must revert each commit) | ✅ Yes (revert merge commit) |
-| **Force it** | `--ff-only` | `--no-ff` |
-| **Best for** | Solo work, small changes | Team work, features |
-
----
-
-## Useful Commands
-
-### Merging with Strategy Control
-
-```bash
-git merge <branch>              # Let Git decide automatically
-git merge --no-ff <branch>      # Force a merge commit
-git merge --ff-only <branch>    # Only merge if fast-forward possible
-git merge --abort               # Cancel a merge in progress
-```
-
-### Viewing Different Merge Types
-
-```bash
-# See all merges
-git log --merges                # Only merge commits
-git log --no-merges             # Hide merge commits
-
-# Visualize history
-git log --oneline --graph       # See branch structure
-git log --oneline --graph --all # Include all branches
-git log --first-parent          # Follow only main branch line
-
-# Check if merge would be fast-forward
-git merge-base main feature     # Find common ancestor
-git log main..feature           # See commits unique to feature
-```
-
-### Configuring Default Behavior
-
-```bash
-# Disable fast-forward by default
-git config merge.ff false       # Always create merge commits
-
-# Only allow fast-forward
-git config merge.ff only        # Refuse non-fast-forward merges
-
-# Reset to default
-git config --unset merge.ff
-```
-
----
-
-## Common Patterns in the Wild
-
-### GitHub Flow (Simple)
-- Use fast-forward when possible
-- Short-lived feature branches
-- Merge to main frequently
-
-### Git Flow (Structured)
-- Always use `--no-ff` for features
-- Preserve branch history
-- Complex release management
-
-### Rebase Workflow
-- Always use `--ff-only`
-- Rebase before merging
-- Strictly linear history
-
----
-
-## Verification
-
-Once you've completed all three merges, verify your solution:
-
-```powershell
-.\verify.ps1
-```
-
-The verification script will check that you've experienced both types of merges and used the `--no-ff` flag.
-
-## Need to Start Over?
-
-If you want to reset the challenge and start fresh:
-
-```powershell
-.\reset.ps1
-```
-
-This will remove the challenge directory and run the setup script again, giving you a clean slate.
-
-## What's Next?
-
-Now that you understand merge strategies, you can make informed decisions about your workflow. Consider:
-
-- **For personal projects:** Fast-forward merges keep history simple
-- **For team projects:** Three-way merges preserve context
-- **For open source:** Follow the project's contribution guidelines
-
-The best strategy depends on your team's needs and workflow!

02-advanced/06-merge-strategies/reset.ps1

@@ -1,24 +0,0 @@
-#!/usr/bin/env pwsh
-<#
-.SYNOPSIS
-    Resets the Module 06 challenge environment.
-
-.DESCRIPTION
-    This script removes the challenge directory and re-runs the setup script
-    to give you a fresh start.
-#>
-
-Write-Host "`n=== Resetting Module 06 Challenge ===" -ForegroundColor Cyan
-
-# Remove challenge directory if it exists
-if (Test-Path "challenge") {
-    Write-Host "Removing existing challenge directory..." -ForegroundColor Yellow
-    Remove-Item -Recurse -Force "challenge"
-    Write-Host "Challenge directory removed." -ForegroundColor Green
-} else {
-    Write-Host "No challenge directory found to remove." -ForegroundColor Yellow
-}
-
-# Run setup script
-Write-Host "`nRunning setup script..." -ForegroundColor Cyan
-& "./setup.ps1"

02-advanced/06-merge-strategies/setup.ps1

@@ -1,221 +0,0 @@
-#!/usr/bin/env pwsh
-<#
-.SYNOPSIS
-    Sets up the Module 06 challenge environment for learning merge strategies.
-
-.DESCRIPTION
-    This script creates a challenge directory with a Git repository that
-    contains scenarios for both fast-forward and three-way merges, allowing
-    students to compare different merge strategies.
-#>
-
-Write-Host "`n=== Setting up Module 06 Challenge ===" -ForegroundColor Cyan
-
-# Remove existing challenge directory if it exists
-if (Test-Path "challenge") {
-    Write-Host "Removing existing challenge directory..." -ForegroundColor Yellow
-    Remove-Item -Recurse -Force "challenge"
-}
-
-# Create fresh challenge directory
-Write-Host "Creating challenge directory..." -ForegroundColor Green
-New-Item -ItemType Directory -Path "challenge" | Out-Null
-Set-Location "challenge"
-
-# Initialize Git repository
-Write-Host "Initializing Git repository..." -ForegroundColor Green
-git init | Out-Null
-
-# Configure git for this repository
-git config user.name "Workshop Student"
-git config user.email "student@example.com"
-
-# ========================================
-# Scenario 1: Fast-Forward Merge Setup
-# ========================================
-
-Write-Host "Setting up fast-forward merge scenario..." -ForegroundColor Green
-
-# Commit 1: Initial structure on main
-$appContent = @"
-# app.py - Main application
-
-def main():
-    print("Application started")
-    pass
-
-if __name__ == "__main__":
-    main()
-"@
-Set-Content -Path "app.py" -Value $appContent
-
-git add .
-git commit -m "Initial application structure" | Out-Null
-
-# Create feature-fast-forward branch (main won't change after this)
-git switch -c feature-fast-forward | Out-Null
-
-# Commit on feature-fast-forward
-$utilsContent = @"
-# utils.py - Utility functions
-
-def format_string(text):
-    """Format a string to title case."""
-    return text.title()
-
-def validate_input(text):
-    """Validate user input."""
-    return text and len(text) > 0
-"@
-Set-Content -Path "utils.py" -Value $utilsContent
-
-git add .
-git commit -m "Add utility functions" | Out-Null
-
-# Second commit on feature-fast-forward
-$utilsContent = @"
-# utils.py - Utility functions
-
-def format_string(text):
-    """Format a string to title case."""
-    return text.title()
-
-def validate_input(text):
-    """Validate user input."""
-    return text and len(text) > 0
-
-def sanitize_input(text):
-    """Remove dangerous characters from input."""
-    return text.replace("<", "").replace(">", "")
-"@
-Set-Content -Path "utils.py" -Value $utilsContent
-
-git add .
-git commit -m "Add input sanitization" | Out-Null
-
-# ========================================
-# Scenario 2: Three-Way Merge Setup
-# ========================================
-
-Write-Host "Setting up three-way merge scenario..." -ForegroundColor Green
-
-# Switch back to main
-git switch main | Out-Null
-
-# Create feature-divergent branch
-git switch -c feature-divergent | Out-Null
-
-# Commit on feature-divergent
-$authContent = @"
-# auth.py - Authentication module
-
-def authenticate(username, password):
-    """Authenticate a user."""
-    print(f"Authenticating: {username}")
-    # TODO: Implement actual authentication
-    return True
-"@
-Set-Content -Path "auth.py" -Value $authContent
-
-git add .
-git commit -m "Add authentication module" | Out-Null
-
-# Second commit on feature-divergent
-$authContent = @"
-# auth.py - Authentication module
-
-def authenticate(username, password):
-    """Authenticate a user."""
-    print(f"Authenticating: {username}")
-    # TODO: Implement actual authentication
-    return True
-
-def check_permissions(user, resource):
-    """Check if user has permission for resource."""
-    print(f"Checking permissions for {user}")
-    return True
-"@
-Set-Content -Path "auth.py" -Value $authContent
-
-git add .
-git commit -m "Add permission checking" | Out-Null
-
-# Switch back to main and make a commit (creates divergence)
-git switch main | Out-Null
-
-$readmeContent = @"
-# My Application
-
-A Python application with utilities and authentication.
-
-## Features
-
-- String formatting and validation
-- User authentication
-- Permission management
-
-## Setup
-
-1. Install Python 3.8+
-2. Run: python app.py
-"@
-Set-Content -Path "README.md" -Value $readmeContent
-
-git add .
-git commit -m "Add README documentation" | Out-Null
-
-# ========================================
-# Scenario 3: Optional Fast-Forward for --no-ff
-# ========================================
-
-Write-Host "Setting up --no-ff demonstration scenario..." -ForegroundColor Green
-
-# Create feature-optional branch (main won't change after this)
-git switch -c feature-optional | Out-Null
-
-# Commit on feature-optional
-$configContent = @"
-# config.py - Configuration settings
-
-DEBUG_MODE = False
-LOG_LEVEL = "INFO"
-DATABASE_URL = "sqlite:///app.db"
-"@
-Set-Content -Path "config.py" -Value $configContent
-
-git add .
-git commit -m "Add configuration module" | Out-Null
-
-# Switch back to main
-git switch main | Out-Null
-
-# Return to module directory
-Set-Location ..
-
-Write-Host "`n=== Setup Complete! ===" -ForegroundColor Green
-Write-Host "`nYour challenge environment is ready in the 'challenge/' directory." -ForegroundColor Cyan
-Write-Host "`nYou have THREE scenarios set up:" -ForegroundColor Yellow
-Write-Host "`n  Scenario 1: Fast-Forward Merge" -ForegroundColor White
-Write-Host "    Branch: feature-fast-forward" -ForegroundColor Cyan
-Write-Host "    Status: main has NOT changed since branch was created" -ForegroundColor Cyan
-Write-Host "    Result: Will fast-forward (no merge commit)" -ForegroundColor Green
-Write-Host "`n  Scenario 2: Three-Way Merge" -ForegroundColor White
-Write-Host "    Branch: feature-divergent" -ForegroundColor Cyan
-Write-Host "    Status: BOTH main and branch have new commits" -ForegroundColor Cyan
-Write-Host "    Result: Will create merge commit" -ForegroundColor Green
-Write-Host "`n  Scenario 3: Force Merge Commit" -ForegroundColor White
-Write-Host "    Branch: feature-optional" -ForegroundColor Cyan
-Write-Host "    Status: Could fast-forward, but we'll use --no-ff" -ForegroundColor Cyan
-Write-Host "    Result: Will create merge commit even though fast-forward is possible" -ForegroundColor Green
-Write-Host "`nNext steps:" -ForegroundColor Cyan
-Write-Host "  1. cd challenge" -ForegroundColor White
-Write-Host "  2. View initial state: git log --oneline --graph --all" -ForegroundColor White
-Write-Host "  3. Merge fast-forward: git merge feature-fast-forward" -ForegroundColor White
-Write-Host "  4. View result: git log --oneline --graph" -ForegroundColor White
-Write-Host "  5. Merge divergent: git merge feature-divergent" -ForegroundColor White
-Write-Host "  6. View result: git log --oneline --graph --all" -ForegroundColor White
-Write-Host "  7. Merge with --no-ff: git merge --no-ff feature-optional" -ForegroundColor White
-Write-Host "  8. View final result: git log --oneline --graph --all" -ForegroundColor White
-Write-Host "  9. Compare all three merges!" -ForegroundColor White
-Write-Host " 10. Run '..\verify.ps1' to check your solution" -ForegroundColor White
-Write-Host ""

02-advanced/06-merge-strategies/verify.ps1

@@ -1,140 +0,0 @@
-#!/usr/bin/env pwsh
-<#
-.SYNOPSIS
-    Verifies the Module 06 challenge solution.
-
-.DESCRIPTION
-    This script checks that:
-    - The challenge directory exists
-    - A Git repository exists
-    - All three feature branches have been merged
-    - Appropriate merge strategies were used
-    - Student understands the difference between fast-forward and three-way merges
-#>
-
-Write-Host "`n=== Verifying Module 06 Solution ===" -ForegroundColor Cyan
-
-$allChecksPassed = $true
-
-# Check if challenge directory exists
-if (-not (Test-Path "challenge")) {
-    Write-Host "[FAIL] Challenge directory not found. Did you run setup.ps1?" -ForegroundColor Red
-    exit 1
-}
-
-Set-Location "challenge"
-
-# Check if git repository exists
-if (-not (Test-Path ".git")) {
-    Write-Host "[FAIL] Not a git repository. Did you run setup.ps1?" -ForegroundColor Red
-    Set-Location ..
-    exit 1
-}
-
-# Check current branch is main
-$currentBranch = git branch --show-current 2>$null
-if ($currentBranch -eq "main") {
-    Write-Host "[PASS] Currently on main branch" -ForegroundColor Green
-} else {
-    Write-Host "[FAIL] Not on main branch (currently on: $currentBranch)" -ForegroundColor Red
-    Write-Host "[HINT] Switch to main with: git switch main" -ForegroundColor Yellow
-    $allChecksPassed = $false
-}
-
-# Check 1: Fast-Forward Merge - utils.py should exist
-if (Test-Path "utils.py") {
-    Write-Host "[PASS] utils.py exists (feature-fast-forward merged)" -ForegroundColor Green
-} else {
-    Write-Host "[FAIL] utils.py not found" -ForegroundColor Red
-    Write-Host "[HINT] Merge feature-fast-forward: git merge feature-fast-forward" -ForegroundColor Yellow
-    $allChecksPassed = $false
-}
-
-# Check 2: Three-Way Merge - auth.py should exist
-if (Test-Path "auth.py") {
-    Write-Host "[PASS] auth.py exists (feature-divergent merged)" -ForegroundColor Green
-} else {
-    Write-Host "[FAIL] auth.py not found" -ForegroundColor Red
-    Write-Host "[HINT] Merge feature-divergent: git merge feature-divergent" -ForegroundColor Yellow
-    $allChecksPassed = $false
-}
-
-# Check 3: --no-ff Merge - config.py should exist
-if (Test-Path "config.py") {
-    Write-Host "[PASS] config.py exists (feature-optional merged)" -ForegroundColor Green
-} else {
-    Write-Host "[FAIL] config.py not found" -ForegroundColor Red
-    Write-Host "[HINT] Merge feature-optional: git merge --no-ff feature-optional" -ForegroundColor Yellow
-    $allChecksPassed = $false
-}
-
-# Check for merge commits
-$mergeCommits = git log --merges --oneline 2>$null
-$mergeCount = ($mergeCommits | Measure-Object -Line).Lines
-
-if ($mergeCount -ge 2) {
-    Write-Host "[PASS] Found $mergeCount merge commit(s)" -ForegroundColor Green
-    Write-Host "[INFO] Expected: 1 from three-way merge + 1 from --no-ff = 2 total" -ForegroundColor Cyan
-} else {
-    Write-Host "[FAIL] Only found $mergeCount merge commit(s), expected at least 2" -ForegroundColor Red
-    Write-Host "[HINT] Make sure to:" -ForegroundColor Yellow
-    Write-Host "       1. Merge feature-divergent (creates merge commit)" -ForegroundColor Yellow
-    Write-Host "       2. Merge feature-optional with --no-ff flag (forces merge commit)" -ForegroundColor Yellow
-    $allChecksPassed = $false
-}
-
-# Provide detailed merge analysis
-Write-Host "`n--- Merge Analysis ---" -ForegroundColor Cyan
-
-# Count total commits
-$totalCommits = git rev-list --count HEAD 2>$null
-Write-Host "[INFO] Total commits on main: $totalCommits" -ForegroundColor Cyan
-
-# List merge commits
-if ($mergeCommits) {
-    Write-Host "[INFO] Merge commits found:" -ForegroundColor Cyan
-    $mergeCommits | ForEach-Object {
-        Write-Host "       $_" -ForegroundColor White
-    }
-}
-
-# Check if branches still exist
-$branches = git branch 2>$null
-Write-Host "[INFO] Existing branches:" -ForegroundColor Cyan
-$branches | ForEach-Object {
-    Write-Host "       $_" -ForegroundColor White
-}
-
-Set-Location ..
-
-# Final summary
-if ($allChecksPassed) {
-    Write-Host "`n" -NoNewline
-    Write-Host "=====================================" -ForegroundColor Green
-    Write-Host "   CONGRATULATIONS! CHALLENGE PASSED!" -ForegroundColor Green
-    Write-Host "=====================================" -ForegroundColor Green
-    Write-Host "`nYou've mastered Git merge strategies!" -ForegroundColor Cyan
-    Write-Host "`nYou now understand:" -ForegroundColor Cyan
-    Write-Host "  - Fast-forward merges (linear history, no merge commit)" -ForegroundColor White
-    Write-Host "  - Three-way merges (divergent branches, creates merge commit)" -ForegroundColor White
-    Write-Host "  - How to force merge commits with --no-ff flag" -ForegroundColor White
-    Write-Host "  - When to use each merge strategy" -ForegroundColor White
-    Write-Host "  - Trade-offs between linear and branched history" -ForegroundColor White
-    Write-Host "`nKey Takeaways:" -ForegroundColor Yellow
-    Write-Host "  - Git chooses the strategy automatically based on branch state" -ForegroundColor Cyan
-    Write-Host "  - Use --no-ff to preserve feature branch history" -ForegroundColor Cyan
-    Write-Host "  - Use --ff-only to enforce linear history" -ForegroundColor Cyan
-    Write-Host "  - Different workflows prefer different strategies" -ForegroundColor Cyan
-    Write-Host "`nNow you can make informed decisions about merge strategies for your projects!" -ForegroundColor Green
-    Write-Host ""
-} else {
-    Write-Host "`n[SUMMARY] Some checks failed. Review the hints above and try again." -ForegroundColor Red
-    Write-Host "[INFO] You can run this verification script as many times as needed." -ForegroundColor Yellow
-    Write-Host ""
-    Write-Host "Quick Reference:" -ForegroundColor Cyan
-    Write-Host "  git merge feature-fast-forward          # Fast-forward merge" -ForegroundColor White
-    Write-Host "  git merge feature-divergent             # Three-way merge" -ForegroundColor White
-    Write-Host "  git merge --no-ff feature-optional      # Force merge commit" -ForegroundColor White
-    Write-Host ""
-    exit 1
-}

BEST-PRACTICES.md

@@ -0,0 +1,146 @@
+# Best Practices for Cloud-Based Git Collaboration
+
+When multiple people work on the same project, merge conflicts are inevitable. But with good habits, you can dramatically reduce how often they happen and how painful they are to resolve.
+
+## Pull Early, Pull Often
+
+The most common cause of merge conflicts is working on outdated code. The longer you work without syncing, the more your code drifts from what others are doing.
+
+**Do this:**
+```bash
+# Start every work session by pulling
+git pull
+
+# Pull again before pushing
+git pull
+git push
+```
+
+**Why it works:** Small, frequent syncs mean small, manageable conflicts. A conflict in 3 lines is easy to fix. A conflict in 300 lines is a nightmare.
+
+## Keep Commits Small and Focused
+
+Large commits that touch many files are conflict magnets.
+
+**Instead of this:**
+```
+"Implemented user authentication, fixed navbar, updated styles, refactored database"
+```
+
+**Do this:**
+```
+"Add login form to auth page"
+"Add password validation"
+"Connect login form to auth API"
+"Add logout button to navbar"
+```
+
+**Why it works:**
+- Smaller changes = smaller chance of overlap with others
+- If a conflict does happen, it's easier to understand and resolve
+- Easier to review, revert, or cherry-pick specific changes
+
+## Communicate About Shared Files
+
+Some files are conflict hotspots because everyone needs to edit them:
+- Configuration files
+- Route definitions
+- Database schemas
+- Shared constants or types
+
+**Do this:**
+- Tell your team when you're editing shared files
+- Make those changes in dedicated commits
+- Push changes to shared files quickly - don't let them sit
+
+## Use Short-Lived Branches
+
+Long-running branches drift further from the main branch every day.
+
+```
+main:     A───B───C───D───E───F───G───H
+                \
+feature:         X───────────────────────Y
+                 (2 weeks of drift = painful merge)
+```
+
+**Better approach:**
+```
+main:     A───B───C───D───E───F───G───H
+              \       \       \
+feature:       X───────Y───────Z
+               (merge main frequently)
+```
+
+**Do this:**
+- Merge main into your branch regularly (daily if active)
+- Keep features small enough to complete in days, not weeks
+- Break large features into smaller incremental changes
+
+## Organize Code to Minimize Overlap
+
+How you structure your code affects how often people collide.
+
+**Conflict-prone structure:**
+```
+src/
+  app.py           # 2000 lines, everyone edits this
+  utils.py         # 500 lines of mixed utilities
+```
+
+**Better structure:**
+```
+src/
+  auth/
+    login.py
+    logout.py
+  users/
+    profile.py
+    settings.py
+  utils/
+    dates.py
+    strings.py
+```
+
+**Why it works:** When each file has a clear purpose, different team members naturally work in different files.
+
+## Avoid Reformatting Wars
+
+Nothing creates unnecessary conflicts like two people reformatting the same file differently.
+
+**Do this:**
+- Agree on code formatting standards as a team
+- Use automatic formatters (Prettier, Black, etc.)
+- Configure your editor to format on save
+- Run formatters before committing
+
+**Important:** If you need to reformat a file, do it in a dedicated commit with no other changes. This keeps the reformatting separate from your actual work.
+
+## Coordinate Large Refactors
+
+Renaming a widely-used function or moving files around will conflict with almost everyone's work.
+
+**Do this:**
+- Announce refactors to the team before starting
+- Do them quickly and push immediately
+- Consider doing them when others aren't actively working
+- Keep refactoring commits separate from feature work
+
+## The Golden Rules
+
+1. **Sync frequently** - Pull before you start, pull before you push
+2. **Commit small** - Many small commits beat one large commit
+3. **Talk to your team** - A quick message prevents hours of conflict resolution
+4. **Stay focused** - One branch = one purpose
+5. **Push promptly** - Don't sit on finished work
+
+## When Conflicts Do Happen
+
+Even with best practices, conflicts will occur. When they do:
+
+1. **Don't panic** - Conflicts are normal, not failures
+2. **Read carefully** - Understand both sides before choosing
+3. **Test after resolving** - Make sure the merged code actually works
+4. **Ask if unsure** - If you don't understand the other person's code, ask them
+
+Remember: merge conflicts are a communication problem as much as a technical one. The best tool for reducing conflicts is talking to your team.

COMMIT-MESSAGES.md

@@ -0,0 +1,123 @@
+# Writing Good Commit Messages
+
+A good commit message explains **what** the change does and **why** it matters. Your future self (and your teammates) will thank you.
+
+## The Golden Rule: Write the Intent
+
+Write your message as a command - what will this commit **do** when applied?
+
+**Good (imperative, present tense):**
+```
+Add login button to navbar
+Fix crash when username is empty
+Remove unused database connection
+```
+
+**Avoid (past tense, describing what you did):**
+```
+Added login button to navbar
+Fixed crash when username is empty
+Removed unused database connection
+```
+
+**Why?** Think of it as completing this sentence:
+> "If applied, this commit will... **add login button to navbar**"
+
+## Use Prefixes to Categorize
+
+Start your message with a prefix that tells readers what kind of change this is:
+
+| Prefix | Use For | Example |
+|--------|---------|---------|
+| `feat:` | New features | `feat: add password reset flow` |
+| `fix:` | Bug fixes | `fix: prevent duplicate form submission` |
+| `docs:` | Documentation only | `docs: add API examples to README` |
+| `style:` | Formatting, no code change | `style: fix indentation in auth module` |
+| `refactor:` | Code change that doesn't fix or add | `refactor: extract validation logic` |
+| `test:` | Adding or fixing tests | `test: add unit tests for login` |
+| `chore:` | Maintenance, dependencies | `chore: update pytest to 8.0` |
+
+## Keep It Short
+
+The first line should be **50 characters or less**. This ensures it displays properly in:
+- Git log output
+- GitHub/Azure DevOps commit lists
+- Email notifications
+
+```
+fix: resolve memory leak in image processing
+│                                            │
+└──────────── 45 characters ─────────────────┘
+```
+
+## Add Details When Needed
+
+For complex changes, add a blank line and then more context:
+
+```
+fix: prevent crash when user uploads empty file
+
+The application crashed because we tried to read the first byte
+of an empty file. Now we check file size before processing.
+
+Closes #142
+```
+
+Use the body to explain:
+- **Why** this change was necessary
+- **What** was the problem or context
+- **How** does this approach solve it (if not obvious)
+
+## Examples
+
+**Simple bug fix:**
+```
+fix: correct tax calculation for EU customers
+```
+
+**New feature:**
+```
+feat: add dark mode toggle to settings
+```
+
+**With context:**
+```
+refactor: split user service into smaller modules
+
+The user service had grown to 800 lines and was handling
+authentication, profile management, and notifications.
+Split into three focused modules for maintainability.
+```
+
+**Documentation:**
+```
+docs: add setup instructions for Windows
+```
+
+## Quick Reference
+
+```
+<prefix>: <what this commit does>
+
+[optional body: why and how]
+
+[optional footer: references issues]
+```
+
+**Checklist:**
+- [ ] Starts with a prefix (`feat:`, `fix:`, etc.)
+- [ ] Uses imperative mood ("add" not "added")
+- [ ] First line under 50 characters
+- [ ] Explains why, not just what (for complex changes)
+
+## Common Mistakes
+
+| Instead of... | Write... |
+|---------------|----------|
+| `fixed bug` | `fix: prevent null pointer in search` |
+| `updates` | `feat: add email notifications` |
+| `WIP` | `feat: add basic form validation` |
+| `stuff` | `chore: clean up unused imports` |
+| `fix: fix the bug` | `fix: handle empty input in calculator` |
+
+Your commit history tells the story of your project. Make it a story worth reading.

README.md

@@ -47,14 +47,15 @@ Advanced Git workflows for power users:
 
 ### For Module 08: Multiplayer Git
 
-**This module is different!** It uses a real Git server for authentic collaboration:
+**This module is different!** It uses Azure DevOps for authentic cloud-based collaboration:
 
 1. Navigate to `01-essentials/08-multiplayer`
 2. Read the `README.md` for complete instructions
-3. **No setup script** - you'll clone from https://git.frod.dk/multiplayer
+3. **No setup script** - you'll clone from Azure DevOps (URL provided by facilitator)
 4. Work with a partner on shared branches
 5. Experience real merge conflicts and pull requests
-6. **No verify script** - success is visual (your code appears in the final output)
+6. Use SSH keys for secure authentication (best practice)
+7. **No verify script** - success is visual (your code appears in the final output)
 
 **Facilitators**: See `01-essentials/08-multiplayer/FACILITATOR-SETUP.md` for server setup and workshop guidance.
 
@@ -285,7 +286,8 @@ By completing this workshop, you'll be able to:
 - ✅ **Collaborate with teammates on shared repositories**
 - ✅ **Resolve real merge conflicts in a team environment**
 - ✅ **Create and review pull requests**
-- ✅ **Use Git on a real cloud server (Gitea)**
+- ✅ **Use Git on a real cloud server (Azure DevOps)**
+- ✅ **Use SSH keys for secure Git authentication**
 
 ### From Advanced Track:
 - ✅ Rebase to maintain clean, linear history
@@ -336,37 +338,46 @@ The workshop format combines instructor-led sessions with self-paced hands-on mo
 
 ### Setting Up Module 08: Multiplayer Git
 
-Module 08 requires a Git server for authentic collaboration. You have two options:
+Module 08 requires a Git server for authentic collaboration using **Azure DevOps**.
 
-**Option 1: Self-Hosted Gitea Server (Recommended)**
+**Azure DevOps Setup**
 
-Run your own Git server with Gitea using Docker and Cloudflare Tunnel:
+Use Azure DevOps as the cloud-based Git platform for this module:
 
 **Benefits:**
-- 💰 Completely free (no cloud costs)
-- 🔒 Full control over your data
-- 🌐 Accessible from anywhere via Cloudflare Tunnel
-- 🚀 Quick setup with Docker Compose
-- 👥 Perfect for workshops with 2-24 students
+- 💰 Free tier supports up to 5 users with full access
+- 🌐 Cloud-hosted - no server maintenance required
+- 🔒 Enterprise-grade security and reliability
+- 🔑 Built-in SSH key support (industry best practice)
+- 👥 Perfect for workshops with any number of students (use Stakeholder licenses for >5 users)
+- 📊 Built-in pull request workflows and code review tools
 
-**Setup:**
-1. See [GITEA-SETUP.md](GITEA-SETUP.md) for complete Gitea + Docker + Cloudflare Tunnel instructions
-2. See `01-essentials/08-multiplayer/FACILITATOR-SETUP.md` for detailed workshop preparation:
-   - Creating student accounts
-   - Setting up The Great Print Project repository
-   - Pairing students
-   - Monitoring progress
-   - Troubleshooting common issues
+**Setup Steps:**
 
-**Option 2: Azure DevOps / GitHub / GitLab**
+1. **Create Azure DevOps Organization** (if you don't have one):
+   - Sign up at [dev.azure.com](https://dev.azure.com) with a Microsoft account
+   - Create a new organization for your workshop
 
-You can also use existing cloud Git platforms:
-- Create organization/group for the workshop
-- Set up repository with starter code (see facilitator guide)
-- Create user accounts for students
-- Configure permissions
+2. **Set up SSH authentication** (recommended for all users):
+   - See [AZURE-DEVOPS-SSH-SETUP.md](AZURE-DEVOPS-SSH-SETUP.md) for complete SSH key setup instructions
+   - SSH provides secure, passwordless authentication (industry standard)
 
-**Both options work - Gitea gives you more control and is free for any number of students.**
+3. **Configure workshop repository and users**:
+   - See `01-essentials/08-multiplayer/FACILITATOR-SETUP.md` for detailed workshop preparation:
+     - Adding student accounts to Azure DevOps
+     - Creating The Great Print Project repository
+     - Configuring branch policies
+     - Pairing students
+     - Monitoring progress
+     - Troubleshooting SSH and authentication issues
+
+**Alternative: GitHub / GitLab / Bitbucket**
+
+While this workshop uses Azure DevOps, the skills learned apply to any Git platform:
+- The workflow is identical across all platforms
+- SSH authentication works the same way everywhere
+- Pull request concepts transfer directly
+- Students can apply these skills to any Git hosting service
 
 ---
 
@@ -380,7 +391,7 @@ git-workshop/
 ├── GIT-CHEATSHEET.md                  # Quick reference for all Git commands
 ├── WORKSHOP-AGENDA.md                 # Facilitator guide for running workshops
 ├── PRESENTATION-OUTLINE.md            # Slide deck outline
-├── GITEA-SETUP.md                     # Self-hosted Git server setup
+├── AZURE-DEVOPS-SSH-SETUP.md          # SSH authentication best practices for Azure DevOps
 ├── install-glow.ps1                   # Install glow markdown renderer
 │
 ├── 01-essentials/                     # Core Git skills (8 modules)
@@ -406,15 +417,16 @@ git-workshop/
 
 ## What's Unique About This Workshop
 
-### The Great Print Project (Module 07)
+### The Great Print Project (Module 08)
 
 Unlike any other Git tutorial, Module 08 provides **real collaborative experience**:
 
-- **Real Git server**: Not simulated - actual cloud repository at https://git.frod.dk/multiplayer
+- **Real Git server**: Not simulated - actual Azure DevOps cloud repository
 - **Real teammates**: Work in pairs on shared branches
 - **Real conflicts**: Both partners edit the same code and must resolve conflicts together
 - **Real pull requests**: Create PRs, review code, merge to main
 - **Real success**: When all pairs merge, run `python main.py` and see everyone's contributions!
+- **Real security**: Use SSH keys for authentication (industry best practice)
 
 **The challenge**: Each pair implements 3 Python functions (e.g., `print_b()`, `print_c()`, `print_d()`) in a shared repository. When complete, the program prints the alphabet A-Z and numbers 0-9.
 
@@ -459,8 +471,8 @@ A: Absolutely! See the "For Workshop Facilitators" section above. The materials
 **Q: Do I need internet access?**
 A: Modules 01-07 work completely offline. Module 08 requires internet to access the Git server.
 
-**Q: What if I prefer GitHub/GitLab instead of Gitea?**
-A: The skills are identical across all Git platforms. Module 08 uses Gitea but everything you learn applies to GitHub, GitLab, Bitbucket, etc.
+**Q: What if I prefer GitHub/GitLab instead of Azure DevOps?**
+A: The skills are identical across all Git platforms. Module 08 uses Azure DevOps but everything you learn applies directly to GitHub, GitLab, Bitbucket, and any other Git hosting service. The SSH authentication, pull request workflow, and collaboration patterns are the same everywhere.
 
 ---
 

WHAT-IS-GIT.md

@@ -0,0 +1,124 @@
+# What is Git?
+
+Git is a tool that tracks changes to your files over time. Think of it as an "undo history" for your entire project that you can browse, search, and share with others.
+
+## Commits: Snapshots of Your Project
+
+A **commit** is like taking a photo of your entire project at a specific moment in time.
+
+Every time you make a commit, Git:
+1. Records what **all** your files look like right now
+2. Adds a message describing what changed
+3. Notes who made the change and when
+4. Links back to the previous commit
+
+### Every Commit Contains Everything
+
+This is important: each commit is a complete snapshot of **all** files in your project - not just the files you changed. You can check out any commit and see the entire project exactly as it was.
+
+But wait - doesn't that waste a lot of space? No! Git is clever about this.
+
+### Unchanged Files Are Reused
+
+If a file hasn't changed since the last commit, Git doesn't store a new copy. Instead, it simply points to the version it already has:
+
+```
+Commit 1            Commit 2            Commit 3
+─────────           ─────────           ─────────
+README.md ─────────────────────────────> (same)
+app.py    ────────> app.py (v2) ───────> (same)
+config.json ──────> (same) ────────────> config.json (v3)
+```
+
+In this example:
+- `README.md` never changed - all three commits refer to the same stored version
+- `app.py` changed in Commit 2, so a new version was stored
+- `config.json` changed in Commit 3, so a new version was stored
+
+This means:
+- Every commit gives you the **complete picture** of your project
+- Git only stores **new content** when files actually change
+- Going back to any point in history is instant - no need to "replay" changes
+
+```
+Commit 3          Commit 2          Commit 1
+   |                 |                 |
+   v                 v                 v
+[Add login]  <--  [Fix bug]  <--  [First version]
+```
+
+Each commit points back to its parent, creating a chain of history. You can always go back and see exactly what your project looked like at any point.
+
+## The Magic of Checksums
+
+Here's where Git gets clever. Every commit gets a unique ID called a **checksum** (or "hash"). It looks like this:
+
+```
+a1b2c3d4e5f6g7h8i9j0...
+```
+
+This ID is calculated from the **contents** of the commit - the files, the message, the author, and the parent commit's ID.
+
+Why does this matter?
+
+### Verification
+
+If even one character changes in a file, the checksum becomes completely different. This means:
+- Git instantly knows if something has been corrupted or tampered with
+- You can trust that what you downloaded is exactly what was uploaded
+
+### Finding Differences
+
+When you connect to another copy of the repository, Git compares checksums:
+
+```
+Your computer:     Server:
+  Commit A           Commit A      (same checksum = identical)
+  Commit B           Commit B      (same checksum = identical)
+  Commit C           (missing)     (you have something new!)
+```
+
+Git doesn't need to compare every file. It just compares the short checksums to instantly know what's different.
+
+## Distributed: Everyone Has a Full Copy
+
+Unlike older systems where one central server held all the history, Git is **distributed**. This means:
+
+- Every person has a complete copy of the entire project history
+- You can work offline - commit, browse history, create branches
+- If the server disappears, anyone's copy can restore everything
+- You sync with others by exchanging commits
+
+```
+    [Alice's Computer]          [Bob's Computer]
+           |                           |
+    Full history                Full history
+    All branches                All branches
+           |                           |
+           +---- [Shared Server] ------+
+                       |
+                 Full history
+                 All branches
+```
+
+When Alice pushes her new commits to the server, Bob can pull them down. The checksums ensure nothing gets lost or corrupted in transit.
+
+## Putting It All Together
+
+1. **You work** - Edit files, create new ones, delete old ones
+2. **You commit** - Take a snapshot with a descriptive message
+3. **Git calculates** - Creates a unique checksum for this commit
+4. **You push** - Send your commits to a shared server
+5. **Others pull** - Download your commits using checksums to verify
+6. **History grows** - The chain of commits gets longer
+
+That's it! Git is essentially a distributed database of snapshots, connected together and verified by checksums. Everything else - branches, merges, rebasing - builds on these simple ideas.
+
+## Key Takeaways
+
+- **Commit** = A snapshot of your project at one moment
+- **Checksum** = A unique fingerprint calculated from the content
+- **Distributed** = Everyone has a full copy, not just the server
+- **History** = A chain of commits, each pointing to its parent
+
+You don't need to understand every detail to use Git effectively. Just remember: commit often, write clear messages, and sync with your team regularly.

install-prerequisites.ps1

@@ -1,633 +0,0 @@
-#!/usr/bin/env pwsh
-<#
-.SYNOPSIS
-Installs all prerequisites for the Git Workshop using winget.
-
-.DESCRIPTION
-This script automates the installation of required tools for the Git Workshop:
-- PowerShell 7 (cross-platform PowerShell)
-- Git 2.23+ (version control system)
-- Visual Studio Code (code editor with Git integration)
-
-Optional tools (with user prompts):
-- Python 3.12 (for Module 08: Multiplayer Git)
-- Windows Terminal (modern terminal experience)
-
-The script checks for existing installations, shows clear progress, and verifies
-each installation succeeded. At the end, it displays Git configuration instructions.
-
-.EXAMPLE
-PS> .\install-prerequisites.ps1
-Runs the installation script with interactive prompts.
-
-.NOTES
-Requires Windows 11 with winget (App Installer) available.
-Some installations may require administrator privileges.
-#>
-
-[CmdletBinding()]
-param()
-
-Set-StrictMode -Version Latest
-$ErrorActionPreference = 'Continue'  # Continue on errors to show all results
-
-#region Helper Functions
-
-function Write-ColorMessage {
-    param(
-        [string]$Message,
-        [string]$Color = 'White'
-    )
-    Write-Host $Message -ForegroundColor $Color
-}
-
-function Write-Step {
-    param([string]$Message)
-    Write-ColorMessage "`n=== $Message ===" -Color Cyan
-}
-
-function Write-Success {
-    param([string]$Message)
-    Write-ColorMessage "  ✓ $Message" -Color Green
-}
-
-function Write-Warning {
-    param([string]$Message)
-    Write-ColorMessage "  ⚠ $Message" -Color Yellow
-}
-
-function Write-Error {
-    param([string]$Message)
-    Write-ColorMessage "  ✗ $Message" -Color Red
-}
-
-function Test-CommandExists {
-    param([string]$Command)
-
-    $oldPreference = $ErrorActionPreference
-    $ErrorActionPreference = 'SilentlyContinue'
-
-    try {
-        if (Get-Command $Command -ErrorAction SilentlyContinue) {
-            return $true
-        }
-        return $false
-    }
-    finally {
-        $ErrorActionPreference = $oldPreference
-    }
-}
-
-function Get-InstalledVersion {
-    param(
-        [string]$Command,
-        [string]$VersionArg = '--version'
-    )
-
-    try {
-        $output = & $Command $VersionArg 2>&1 | Select-Object -First 1
-        return $output.ToString().Trim()
-    }
-    catch {
-        return $null
-    }
-}
-
-function Test-WingetAvailable {
-    if (-not (Test-CommandExists 'winget')) {
-        Write-Error "winget is not available on this system."
-        Write-Host "`nTo fix this:" -ForegroundColor Yellow
-        Write-Host "  1. Update Windows 11 to the latest version (Settings → Windows Update)" -ForegroundColor White
-        Write-Host "  2. Install 'App Installer' from the Microsoft Store" -ForegroundColor White
-        Write-Host "  3. Restart your computer and run this script again" -ForegroundColor White
-        return $false
-    }
-    return $true
-}
-
-function Install-Package {
-    param(
-        [string]$Name,
-        [string]$WingetId,
-        [string]$CheckCommand,
-        [string]$MinVersion = $null,
-        [string]$AdditionalArgs = ''
-    )
-
-    Write-Step "Installing $Name"
-
-    # Check if already installed
-    if (Test-CommandExists $CheckCommand) {
-        $version = Get-InstalledVersion $CheckCommand
-        Write-Success "$Name is already installed: $version"
-
-        if ($MinVersion -and $version) {
-            # Basic version check (not perfect but good enough for common cases)
-            if ($version -match '(\d+\.[\d.]+)') {
-                $installedVersion = $matches[1]
-                if ([version]$installedVersion -lt [version]$MinVersion) {
-                    Write-Warning "Version $installedVersion is below minimum required version $MinVersion"
-                    Write-Host "  Attempting to upgrade..." -ForegroundColor Cyan
-                }
-                else {
-                    return $true
-                }
-            }
-        }
-        else {
-            return $true
-        }
-    }
-
-    # Install using winget
-    Write-Host "  Installing via winget: $WingetId" -ForegroundColor Cyan
-
-    $installCmd = "winget install --id $WingetId --source winget --silent $AdditionalArgs".Trim()
-    Write-Host "  Running: $installCmd" -ForegroundColor Gray
-
-    try {
-        # Show progress during installation
-        Write-Progress -Activity "Installing $Name" -Status "Downloading and installing..." -PercentComplete 25
-        
-        $result = Invoke-Expression $installCmd 2>&1
-        
-        Write-Progress -Activity "Installing $Name" -Status "Verifying installation..." -PercentComplete 75
-
-        # Check if installation succeeded
-        Start-Sleep -Seconds 2  # Give the system time to register the new command
-
-        # Refresh environment variables in current session
-        $env:Path = [System.Environment]::GetEnvironmentVariable("Path", "Machine") + ";" + [System.Environment]::GetEnvironmentVariable("Path", "User")
-
-        if (Test-CommandExists $CheckCommand) {
-            $version = Get-InstalledVersion $CheckCommand
-            Write-Success "$Name installed successfully: $version"
-            Write-Progress -Activity "Installing $Name" -Completed
-            return $true
-        }
-        else {
-            Write-Warning "$Name installation completed, but command '$CheckCommand' not found."
-            Write-Host "  You may need to restart your terminal or computer." -ForegroundColor Yellow
-            Write-Progress -Activity "Installing $Name" -Completed
-            return $false
-        }
-    }
-    catch {
-        Write-Error "Failed to install $Name`: $_"
-        Write-Progress -Activity "Installing $Name" -Completed
-        return $false
-    }
-}
-
-function Test-GitVersion {
-    if (-not (Test-CommandExists 'git')) {
-        return $false
-    }
-
-    $version = Get-InstalledVersion 'git'
-    
-    # Parse Git version from various formats:
-    # "git version 2.52.0", "git version 2.52.0.windows.1", etc.
-    if ($version -match 'git version (\d+)\.(\d+)') {
-        $majorVersion = [int]$matches[1]
-        $minorVersion = [int]$matches[2]
-        
-        # Check if version is 2.23 or higher
-        if ($majorVersion -gt 2 -or ($majorVersion -eq 2 -and $minorVersion -ge 23)) {
-            return $true
-        }
-        else {
-            Write-Warning "Git version $majorVersion.$minorVersion is below required version 2.23"
-            return $false
-        }
-    }
-
-    Write-Warning "Could not parse Git version from: $version"
-    return $false
-}
-
-function Get-UserConfirmation {
-    param([string]$Prompt)
-
-    while ($true) {
-        $response = Read-Host "$Prompt (y/n)"
-        $response = $response.Trim().ToLower()
-
-        if ($response -eq 'y' -or $response -eq 'yes') {
-            return $true
-        }
-        elseif ($response -eq 'n' -or $response -eq 'no') {
-            return $false
-        }
-        else {
-            Write-Host "Please enter 'y' or 'n'" -ForegroundColor Yellow
-        }
-    }
-}
-
-#endregion
-
-#region Main Script
-
-Write-Host @"
-
-╔═══════════════════════════════════════════════════════════╗
-║                                                           ║
-║   Git Workshop - Prerequisites Installation Script       ║
-║                                                           ║
-╚═══════════════════════════════════════════════════════════╝
-
-"@ -ForegroundColor Cyan
-
-Write-Host "This script will install the required tools for the Git Workshop:" -ForegroundColor White
-Write-Host "  • PowerShell 7 (cross-platform PowerShell)" -ForegroundColor White
-Write-Host "  • Git 2.23+ (version control system)" -ForegroundColor White
-Write-Host "  • Visual Studio Code (code editor)" -ForegroundColor White
-Write-Host ""
-Write-Host "You will be prompted for optional tools:" -ForegroundColor White
-Write-Host "  • Python 3.12 (for Module 08: Multiplayer Git)" -ForegroundColor White
-Write-Host "  • Windows Terminal (modern terminal experience)" -ForegroundColor White
-Write-Host ""
-
-# Check for winget
-Write-Step "Checking Prerequisites"
-
-if (-not (Test-WingetAvailable)) {
-    Write-Host "`nInstallation cannot continue without winget." -ForegroundColor Red
-    return
-}
-
-Write-Success "winget is available"
-
-# Track installation results
-$results = @{
-    PowerShell = $false
-    Git = $false
-    VSCode = $false
-    VSCodeExtensions = $false
-    VSCodePowerShellIntegration = $null  # null = not asked, true = configured, false = skipped/failed
-    Python = $null  # null = not attempted, true = success, false = failed
-    WindowsTerminal = $null
-}
-
-# Progress tracking
-$totalSteps = 4  # Required installations + extensions
-$currentStep = 0
-
-Write-Host "`nStarting installation..." -ForegroundColor Cyan
-Write-Host "Note: Some installations may take a few minutes." -ForegroundColor Gray
-Write-Host ""
-
-# Progress bar helper
-function Write-ProgressIndicator {
-    param(
-        [string]$Activity,
-        [string]$Status,
-        [int]$PercentComplete
-    )
-    
-    Write-Progress -Activity $Activity -Status $Status -PercentComplete $PercentComplete
-}
-
-function Install-VSCodeExtension {
-    param(
-        [string]$ExtensionId,
-        [string]$ExtensionName
-    )
-    
-    Write-Host "  Installing VSCode extension: $ExtensionName" -ForegroundColor Cyan
-    
-    try {
-        # Refresh environment to ensure code command is available
-        $env:Path = [System.Environment]::GetEnvironmentVariable("Path", "Machine") + ";" + [System.Environment]::GetEnvironmentVariable("Path", "User")
-        
-        $result = & code --install-extension $ExtensionId 2>&1
-        
-        if ($LASTEXITCODE -eq 0) {
-            Write-Success "VSCode extension '$ExtensionName' installed successfully"
-            return $true
-        }
-        else {
-            Write-Warning "Failed to install VSCode extension '$ExtensionName'"
-            Write-Host "  You can install it manually later: Ctrl+Shift+X → Search '$ExtensionName'" -ForegroundColor Gray
-            return $false
-        }
-    }
-    catch {
-        Write-Warning "Could not install VSCode extension '$ExtensionName`: $_"
-        Write-Host "  You can install it manually later: Ctrl+Shift+X → Search '$ExtensionName'" -ForegroundColor Gray
-        return $false
-    }
-}
-
-function Set-VSCodePowerShellIntegration {
-    # Ask user if they want to set PowerShell 7 as default terminal
-    $setAsDefault = Get-UserConfirmation "Set PowerShell 7 as the default terminal in VSCode? (Recommended for this workshop)"
-    
-    if (-not $setAsDefault) {
-        Write-Host "  Skipping PowerShell 7 terminal configuration." -ForegroundColor Gray
-        return $false
-    }
-    
-    Write-Host "  Configuring PowerShell 7 integration with VSCode..." -ForegroundColor Cyan
-    
-    try {
-        # Set PowerShell 7 as the default terminal in VSCode
-        $vscodeSettingsPath = Join-Path $env:APPDATA "Code\User\settings.json"
-        $vscodeSettingsDir = Split-Path $vscodeSettingsPath -Parent
-        
-        # Create directory if it doesn't exist
-        if (-not (Test-Path $vscodeSettingsDir)) {
-            New-Item -Path $vscodeSettingsDir -ItemType Directory -Force | Out-Null
-        }
-        
-        # Read existing settings or create new
-        if (Test-Path $vscodeSettingsPath) {
-            $settings = Get-Content $vscodeSettingsPath -Raw | ConvertFrom-Json
-        }
-        else {
-            $settings = @{}
-        }
-        
-        # Set PowerShell 7 as default terminal
-        if (-not $settings.PSObject.Properties.Name -contains "terminal.integrated.defaultProfile.windows") {
-            $settings | Add-Member -NotePropertyName "terminal.integrated.defaultProfile.windows" -NotePropertyValue "PowerShell"
-        }
-        else {
-            $settings."terminal.integrated.defaultProfile.windows" = "PowerShell"
-        }
-        
-        # Add terminal profiles if not present
-        if (-not $settings.PSObject.Properties.Name -contains "terminal.integrated.profiles.windows") {
-            $profiles = @{
-                "PowerShell" = @{
-                    "source" = "PowerShell"
-                    "icon" = "terminal-powershell"
-                    "path" = "pwsh.exe"
-                }
-            }
-            $settings | Add-Member -NotePropertyName "terminal.integrated.profiles.windows" -NotePropertyValue $profiles
-        }
-        
-        # Save settings
-        $settings | ConvertTo-Json -Depth 10 | Set-Content $vscodeSettingsPath
-        
-        Write-Success "VSCode configured to use PowerShell 7 as default terminal"
-        return $true
-    }
-    catch {
-        Write-Warning "Could not configure VSCode PowerShell integration automatically"
-        Write-Host "  You can configure it manually in VSCode: Ctrl+Shift+P → Terminal: Select Default Profile → PowerShell" -ForegroundColor Gray
-        return $false
-    }
-}
-
-#region Required Installations
-
-# Install PowerShell 7
-$currentStep++
-Write-ProgressIndicator -Activity "Installing Required Tools" -Status "Installing PowerShell 7 (1/3)" -PercentComplete (($currentStep / $totalSteps) * 100)
-$results.PowerShell = Install-Package `
-    -Name "PowerShell 7" `
-    -WingetId "Microsoft.PowerShell" `
-    -CheckCommand "pwsh"
-
-# Install Git
-$currentStep++
-Write-ProgressIndicator -Activity "Installing Required Tools" -Status "Installing Git (2/3)" -PercentComplete (($currentStep / $totalSteps) * 100)
-$results.Git = Install-Package `
-    -Name "Git" `
-    -WingetId "Git.Git" `
-    -CheckCommand "git" `
-    -MinVersion "2.23" `
-    -AdditionalArgs "-e"
-
-# Verify Git version specifically
-if ($results.Git) {
-    if (-not (Test-GitVersion)) {
-        Write-Warning "Git is installed but version may be below 2.23"
-        $results.Git = $false
-    }
-}
-
-# Install Visual Studio Code
-$currentStep++
-Write-ProgressIndicator -Activity "Installing Required Tools" -Status "Installing Visual Studio Code (3/4)" -PercentComplete (($currentStep / $totalSteps) * 100)
-$results.VSCode = Install-Package `
-    -Name "Visual Studio Code" `
-    -WingetId "Microsoft.VisualStudioCode" `
-    -CheckCommand "code"
-
-# Install VSCode Extensions and configure PowerShell integration
-if ($results.VSCode) {
-    $currentStep++
-    Write-ProgressIndicator -Activity "Installing Required Tools" -Status "Installing VSCode Extensions (4/4)" -PercentComplete (($currentStep / $totalSteps) * 100)
-    
-    Write-Host ""
-    Write-Step "Configuring VSCode"
-    
-    # Install PowerShell extension
-    $powershellExtensionResult = Install-VSCodeExtension -ExtensionId "ms-vscode.PowerShell" -ExtensionName "PowerShell"
-    
-    
-    
-    # Configure PowerShell 7 integration (optional but recommended)
-    $powershellIntegrationResult = Set-VSCodePowerShellIntegration
-    $results.VSCodePowerShellIntegration = $powershellIntegrationResult
-    
-    $results.VSCodeExtensions = $powershellExtensionResult
-}
-else {
-    $results.VSCodeExtensions = $false
-}
-
-# Clear progress bar
-Write-Progress -Activity "Installing Required Tools" -Completed
-
-#endregion
-
-#region Optional Installations
-
-# Python 3.12 (optional)
-Write-Host ""
-if (Get-UserConfirmation "Do you want to install Python 3.12? (Required for Module 08: Multiplayer Git)") {
-    Write-ProgressIndicator -Activity "Installing Optional Tools" -Status "Installing Python 3.12" -PercentComplete 50
-    $results.Python = Install-Package `
-        -Name "Python 3.12" `
-        -WingetId "Python.Python.3.12" `
-        -CheckCommand "python"
-    Write-Progress -Activity "Installing Optional Tools" -Completed
-}
-else {
-    Write-Host "  Skipping Python installation." -ForegroundColor Gray
-    $results.Python = $null
-}
-
-# Windows Terminal (optional)
-Write-Host ""
-if (Get-UserConfirmation "Do you want to install Windows Terminal? (Highly recommended for better terminal experience)") {
-    Write-ProgressIndicator -Activity "Installing Optional Tools" -Status "Installing Windows Terminal" -PercentComplete 50
-    $results.WindowsTerminal = Install-Package `
-        -Name "Windows Terminal" `
-        -WingetId "Microsoft.WindowsTerminal" `
-        -CheckCommand "wt"
-    Write-Progress -Activity "Installing Optional Tools" -Completed
-}
-else {
-    Write-Host "  Skipping Windows Terminal installation." -ForegroundColor Gray
-    $results.WindowsTerminal = $null
-}
-
-#endregion
-
-#region Installation Summary
-
-Write-Step "Installation Summary"
-
-$allRequired = $results.PowerShell -and $results.Git -and $results.VSCode
-
-Write-Host ""
-Write-Host "Required Tools:" -ForegroundColor White
-
-if ($results.PowerShell) {
-    Write-Success "PowerShell 7"
-}
-else {
-    Write-Error "PowerShell 7 - Installation failed or needs restart"
-}
-
-if ($results.Git) {
-    Write-Success "Git 2.23+"
-}
-else {
-    Write-Error "Git 2.23+ - Installation failed or needs restart"
-}
-
-if ($results.VSCode) {
-    Write-Success "Visual Studio Code"
-    
-    if ($results.VSCodeExtensions) {
-        Write-Success "  • PowerShell extension"
-    }
-    else {
-        Write-Warning "  • VSCode PowerShell extension may need manual installation"
-    }
-    
-    if ($results.VSCodePowerShellIntegration -eq $true) {
-        Write-Success "  • PowerShell 7 terminal integration"
-    }
-    elseif ($results.VSCodePowerShellIntegration -eq $false) {
-        Write-Host "  • PowerShell 7 terminal integration: Skipped" -ForegroundColor Gray
-    }
-}
-else {
-    Write-Error "Visual Studio Code - Installation failed or needs restart"
-}
-
-if ($results.Python -ne $null) {
-    Write-Host ""
-    Write-Host "Optional Tools:" -ForegroundColor White
-
-    if ($results.Python) {
-        Write-Success "Python 3.12"
-    }
-    else {
-        Write-Error "Python 3.12 - Installation failed or needs restart"
-    }
-}
-
-if ($results.WindowsTerminal -ne $null) {
-    if ($results.Python -eq $null) {
-        Write-Host ""
-        Write-Host "Optional Tools:" -ForegroundColor White
-    }
-
-    if ($results.WindowsTerminal) {
-        Write-Success "Windows Terminal"
-    }
-    else {
-        Write-Error "Windows Terminal - Installation failed or needs restart"
-    }
-}
-
-#endregion
-
-#region Next Steps
-
-Write-Step "Next Steps"
-
-if ($allRequired) {
-    Write-Host ""
-    Write-Success "All required tools installed successfully!"
-    Write-Host ""
-
-    Write-Host "IMPORTANT: Configure Git before your first commit:" -ForegroundColor Yellow
-    Write-Host ""
-    Write-Host "  git config --global user.name `"Your Name`"" -ForegroundColor White
-    Write-Host "  git config --global user.email `"your.email@example.com`"" -ForegroundColor White
-    Write-Host ""
-
-    Write-Host "Optional: Set VS Code as Git's default editor:" -ForegroundColor Cyan
-    Write-Host "  git config --global core.editor `"code --wait`"" -ForegroundColor White
-    Write-Host ""
-
-    Write-Host "Verify your installation:" -ForegroundColor Cyan
-    Write-Host "  pwsh --version" -ForegroundColor White
-    Write-Host "  git --version" -ForegroundColor White
-    Write-Host "  code --version" -ForegroundColor White
-    if ($results.Python) {
-        Write-Host "  python --version" -ForegroundColor White
-    }
-    Write-Host ""
-
-    Write-Host "Set PowerShell execution policy (if needed):" -ForegroundColor Cyan
-    Write-Host "  Set-ExecutionPolicy -ExecutionPolicy RemoteSigned -Scope CurrentUser" -ForegroundColor White
-    Write-Host ""
-
-    Write-Host "Recommended VS Code Extensions:" -ForegroundColor Cyan
-    Write-Host "  • GitLens - Supercharge Git capabilities" -ForegroundColor White
-    Write-Host "  • Git Graph - View Git history visually" -ForegroundColor White
-    Write-Host "  • PowerShell - Better PowerShell support (from Microsoft)" -ForegroundColor White
-    Write-Host ""
-    Write-Host "  Install via: Ctrl+Shift+X in VS Code" -ForegroundColor Gray
-    Write-Host ""
-
-    Write-Host "You're ready to start the workshop!" -ForegroundColor Green
-    Write-Host "  cd path\to\git-workshop" -ForegroundColor White
-    Write-Host "  cd 01-essentials\01-basics" -ForegroundColor White
-    Write-Host "  .\setup.ps1" -ForegroundColor White
-    Write-Host ""
-}
-else {
-    Write-Host ""
-    Write-Warning "Some required installations failed or need verification."
-    Write-Host ""
-    Write-Host "Troubleshooting steps:" -ForegroundColor Yellow
-    Write-Host "  1. Close and reopen your terminal (or restart your computer)" -ForegroundColor White
-    Write-Host "  2. Run this script again: .\install-prerequisites.ps1" -ForegroundColor White
-    Write-Host "  3. If issues persist, try manual installation:" -ForegroundColor White
-    Write-Host "     See INSTALLATION.md for detailed instructions" -ForegroundColor White
-    Write-Host ""
-
-    if (-not $results.Git) {
-        Write-Host "For Git issues:" -ForegroundColor Yellow
-        Write-Host "  • Restart terminal after installation (PATH needs to refresh)" -ForegroundColor White
-        Write-Host "  • Manual download: https://git-scm.com/downloads" -ForegroundColor White
-        Write-Host ""
-    }
-
-    if (-not $results.VSCode) {
-        Write-Host "For VS Code issues:" -ForegroundColor Yellow
-        Write-Host "  • Ensure 'Add to PATH' option is enabled during installation" -ForegroundColor White
-        Write-Host "  • Manual download: https://code.visualstudio.com/" -ForegroundColor White
-        Write-Host ""
-    }
-
-    if (-not $results.PowerShell) {
-        Write-Host "For PowerShell 7 issues:" -ForegroundColor Yellow
-        Write-Host "  • Manual download: https://github.com/PowerShell/PowerShell/releases/latest" -ForegroundColor White
-        Write-Host "  • Download the file ending in '-win-x64.msi'" -ForegroundColor White
-        Write-Host ""
-    }
-
-}